Laboratory and industrial analysis of COD of effluents of any industry
Hach has developed a range of complete solutions adapted for laboratories and factories performing COD tests. Coordinated instrumentation and reagent systems enable you to run your analysis safer, faster, and with confidence in your results.
The DR6000 is the most advanced laboratory spectrophotometer in the industry. It offers high-speed UV and Visible wavelength scanning and comes with over 250 pre-programmed methods that include the most common testing methods used in water analysis.
Total Chlorine Reagent Set for chlorine analyser CL17/CL17sc
Hach reagents for the determination of Total Chlorine by DPD in the analysis of drinking, waste and process water, as well as for the control and monitoring of product quality. The volume of reagents is sufficient for 450 tests. Range 0.03 - 5.00 mg / L Cl2 for CL17 and 0.03 - 10.00 mg / L Cl2 for CL17sc.
Portable and rugged microprocessor controlled colorimeter with energy saving LED technology. Multi-parameter portable water analysis - a wide range of water quality parameters for use in the field and lab.
Comparator / color disc for free and total chlorine, 0 - 3,4 mg/L Cl2
Single test - kit for measuring total and free chlorine in the water, ranges of 0 - 3,4 mg/L, by the DPD method. This method allows getting a quick result.
The package has reagents for 50 free chlorine tests and 50 total chlorine tests.
Hach reagents for the determination of Chlorine in the analysis of drinking, waste and process water, as well as for control and monitoring of product quality. The reagent volume is sufficient for approximately 100 tests. Range 0.02 - 2.00 mg/L Cl2
Amperometric sensors for total and free chlorine CLT10 sc and CLF10 sc
The amperometric sensors CLT10 sc and CLF10 sc complement real-time chemical analysis solutions for free and total chlorine in the laboratory and industry. Amperometric sensors continuously monitor the chlorine concentration without the use of reagents. Measurement range 0 - 20 ppm Cl2.
Test kit for monitoring source water and water at treatment facilities. Drop count titration and color disk methods are used to perform analyzes for ammonia, chlorine, pH, nitrate, dissolved oxygen, phosphorus and temperature.