NucleoCounter® NC-3000 ™ Imaging Cytometer
SKU: 900-3001
Manufacturer: ChemoMetec
Availability: Order only
NucleoCounter® NC-3000 ™ is a compact multifunctional cell analyzer. The system is intended for research purposes only and not for diagnostics. The analyzer is used in conjunction with ChemoMetec disposable cassettes and special glass slides with 2 or 8 chambers, allowing the analysis of samples from 0.8 to 16 μL.
Description Specifications Video Recommended products Accessories
Description
Description
The NucleoCounter® NC-3000 is a high-tech cell analyzer based on fluorescence microscopy using a low power CCD camera and imaging technology.
Key features of the multifunctional cell analyzer:
- Does not require system calibration and cleaning - the device is ready for analysis immediately after it is turned on
- Automatic reports in PDF format
- Unlimited licenses and free software updates
- High-speed counting and analysis of cell viability
- Visualization of the results obtained - graphs / images
- Images are saved automatically and can be re-analyzed later.
- Small sample volume.
- The ability to create your own analyzes.
- Data export to FCS Express, FlowJo, etc.
The multiple properties of individual cells are analyzed using 8 integrated light sources (7 of them from 365 nm to 625 nm and a white light source) and 9 emission filters. All lights and filters can be combined in any possible combination to provide flexibility in analysis. They allow direct comparison of various parameters detected or quantified for each individual cell. Low magnification (x2) provides a large amount of analysis and therefore high statistical performance.
The NucleoCounter® NC-3000 ™ can perform a number of different assays. All of them are programmed into the analyzer with a description of the protocols. The goal of the protocols is to provide the operator with the setup to perform extremely complex analyzes in a very simple manner, minimizing training time. Simply select the desired assay from the list of preset protocols, press the RUN button and get cell cycle assay results in 5 minutes and apoptosis assay in 1 minute (no pre-warming, calibration, or instrument setup required).
The instrument performs the following analyzes:
- Viability analysis and cell counting
- Viability analysis
- Mitochondrial potential analysis
- Cell cycle analysis
- DNA fragmentation analysis
- GFP transfection efficiency analysis
The sample tray can hold a cassette or glass slide. It can be moved in both the X and Y directions during analysis. There are two keys on the front of the analyzer. One is for inserting and removing the sample tray, the other is used to repeat the last type of analysis performed on the instrument. Thus, it is easy to perform a series of identical analyzes without the need to re-configure the method.
Fast and easy cell count and viability analysis
One-step counting and analysis of cell viability without pretreatment using ChemoMetec cassettes: To determine cell viability and concentration, a sample of the cell suspension is drawn directly from Via1-Cassette. The inside of the cassette is coated with two different dyes that stain the entire population of cells and any non-viable cells, respectively.
Perform 8 cell counts and viability assays in less than 3 minutes with ChemoMetec slides: Multi-chamber NC-Slide A8 provides accurate, high-speed cell counts. Within 3 minutes, you will have 8 cell counts and viability measurements, while only a small sample volume is required.
The ease of use of the software makes cytometry affordable, eliminating the need for specialized personnel. The data are presented in the form of bar graphs, offering the user a clear overview of the analysis results. The software displays an image of the loaded cell sample with 2x magnification for visual inspection and evaluation.
Specifications
NucleoCounter® NC-3000 ™ - это высокотехнологичный анализатор клеток, принцип работы которого основан на флуоресцентной микроскопии с использованием ПЗС камеры с малым увеличением и технологией визуализции.
Ключевые особенности многофункционального анализатора клеток:
- Не требует калибровки и промывки системы - прибор готов к проведению анализа сразу после его включения
- Автоматические отчеты в формате PDF
- Неограниченные лицензии и бесплатные обновления ПО
- Высокоскоростной подсчет и анализ жизнеспособности клеток
- Визуализация полученных результатов - графики / изображения
- Изображения сохраняются автоматически и могут быть повторно проанализированы позже.
- Малый объем образца.
- Возможность создания собственных анализов.
- Экспорт данных в FCS Express, FlowJo и пр.
Многочисленные свойства отдельных клеток анализируются с помощью 8 интегрированных источников света (7 из них от 365 нм до 625 нм и источник белого света) и 9 эмиссионными фильтрами. Все источники света и фильтры можно сочетать в любой возможной комбинации, что обеспечивает гибкость анализа. Они позволяют напрямую сравнивать различные параметры, обнаруженные или количественно оцененные для каждой отдельной клетки. Малое увеличение (x2) обеспечивает большой объем анализа и, следовательно высокую статистическую производительность.
На NucleoCounter® NC-3000 ™ можно провести ряд различных анализов. Все они запрограммированы в анализаторе с описанием протоколов. Задача протоколов - предоставить оператору настройку для выполнения чрезвычайно сложного анализа очень простым способом, минимизируя время на обучение. Просто выберите нужный анализ из списка предустановленных протоколов, нажмите на кнопку RUN и получите результаты анализа клеточного цикла через 5 минут, а анализ апоптоза через 1 минуту (предварительный прогрев, калибровка и настройка инструмента не требуются).
Прибор выполняет следующие анализы:
- Анализ жизнеспособности и подсчет количества клеток
- Анализ жизнеспособности
- Анализ митохондриального потенциала
- Анализ клеточного цикла
- Анализ фрагментации ДНК
- Анализ эффективности трансфекции GFP
В лоток для образцов можно помещать кассету или предметное стекло. Его можно перемещать во время анализа как по оси X, так и по оси Y. На передней панели анализатора есть две клавиши. Одна предназначена для вставки и извлечения лотка для образцов, вторая используется для повторения последнего типа анализа, выполненного на приборе. Таким образом, легко выполнять ряд идентичных анализов без необходимости в повторной настройке методики.
Быстрый и простой подсчет клеток и анализ жизнеспособности
- Одноэтапный подсчет и анализ жизнеспособности клеток без предварительной обработки c помощью кассет ChemoMetec: Чтобы определить жизнеспособность и концентрацию клеток, образец клеточной суспензии набирается непосредственно в Via1-Cassette. Внутренняя часть кассеты покрыта двумя разными красителями, которые окрашивают всю популяцию клеток и любые нежизнеспособные клетки соответственно.
- Выполняйте 8 подсчетов клеток и анализов жизнеспособности менее чем за 3 минуты с помощью предметных стекол (слайдов) ChemoMetec: Многокамерные NC-Slide A8 обеспечивают точный высокоскоростной подсчет клеток. В течение 3 минут у вас будет 8 подсчетов клеток и измерений жизнеспособности, в то время как потребуется лишь небольшой объем образца.
Простота использования программного обеспечения делает цитометрию доступной, устраняя необходимость в специализированном персонале. Данные представляются в виде гистограмм, предлагая пользователю четкий обзор результатов анализа. ПО отображает изображение загруженного образца клеток с возможностью 2-кратного увеличения для визуальной проверки и оценки.
Технические характеристики
Part Number |
970-3002 (Fixed Analytical Assays) |
Optics |
Lens with x 2 magnification, 1/2” CCD with 1392 x 1040 pixels |
Sampler |
Via1-Cassette ™, NC-Slide A2 ™ и NC-Slide A8 ™ |
Excitation (nm) |
Seven LED light sources with peaks at 365, 405, 475, 530, 630 + 2 white LEDs |
Emission (nm) |
Nine interchangeable emission filters: 430/20, 470/55, 475/15, 530/15, 560/35, 580/25, 675/75, 630 LP, 740/60 |
Sample consumption |
Approximately 60 μl (cassettes), Approximately 30 μl (A2 slides), Approximately 10 μl (A8 slides) |
Analyzed volume |
3.2 μl sample (cassettes), 0.8-16 μl sample (chamber slides) |
Optimal range |
5 x 104 – 5 x 106 cells/ml (for counting) |
Cell types |
Mammalian cells, yeast, insect cells, avian cells |
Mim. requirements |
Windows 7, 8 or 10, USB 2.0, screen resolution 1366 x 768 pixels, 4 GB RAM and 10 GB free disc space |
Data presentation |
Images, tables, histograms, scatter plots |
Weight / Dimentions |
14 kg; 29 x 29 x 31 cm [H x W x D] |
Specifications
Application area | Pharmaceuticals |
Type | Laboratory |
Industry | Pharmaceutical, Chemical |
Recommended products
Automatic yeast cell counter NucleoCounter® YC-100 ™
The instrument is part of the NucleoCounter YC-100 system, which also includes a NucleoCassette disposable cassette and lysis buffer (Reagent Y100). The system allows for reliable, fast and objective cell counting based on automated fluorescence microscopy.
SKU: 970-0002
NucleoCounter® SP-100 ™ Mammalian Sperm Cell Counter
NucleoCounter SP-100 is designed for counting sperm in the semen of mammals for the analysis of sperm in the process of artificial insemination in animal husbandry.
SKU: 970-0003
NucleoCounter® NC-100 ™ mammalian cell counter
The NucleoCounter® NC-100 ™ Mammalian Cell Counter is an imaging cytometer based on the fluorescence of the dye, propidium iodide (PI).
SKU: 970-0001
Automatic Cell Counter NucleoCounter NC-200
The NucleoCounter NC-200 is a compact cell counter designed for life sciences and pharmaceutical research. The system is for research purposes only.
SKU: 970-0200
Accessories
Cell lysis buffer Reagent Y100, 500 ml
Reagent to determine the total number of yeast cells in a sample using the YC-100 ™ and NC-3000 ™.
SKU: 910-0300
Via1-Cassette cassettes, pack of 100
Via1-Cassette ™ is a dedicated cell selection and staining device for NucleoCounter® instruments.
SKU: 941-0012
Slides NC-Slide A2 ™
ChemoMetec bicameral slides (slides) made of high quality glass. Used with the NC-250 and NC-3000 analyzer models.
SKU: 942-0001
Slides NC-Slide A8 ™
ChemoMetec 8 chambers slides made of high quality glass. Used with the NC-250 and NC-3000 analyzer models.
SKU: 942-0003
Related products
Reagent A100, volume 500 ml
Lysis buffer used to count the total number of cells with the NucleoCounter system.
SKU: 910-0003
Reagent B, 500 ml
Buffer for pH stabilization during cell analysis.
SKU: 910-0002
Solution 20 VitaBright-48, 100 μl
Solution for cytometric profiling of apoptosis and other pathological processes.
SKU: 910-3020
Solution 19 VitaBright-43, 100 μl
Solution for cytometric profiling of apoptosis and other pathological processes.
SKU: 910-3019
Solution 17 Blood lysis buffer, 25 ml
Used in determining the viability and concentration of leukocytes in samples containing red erythrocytes.
SKU: 910-3017
Solution 13 AO - DAPI 1ml
Solution for determining viability and counting cells using NC-Slides and NC-3000 analyzer.
SKU: 910-3013
Solution 12 DAPI (4’,6-diamidino-2-phenylindole) 1ml
DAPI fluorescent dye.
SKU: 910-3012
Show more
Recommended products
Automatic yeast cell counter NucleoCounter® YC-100 ™
The instrument is part of the NucleoCounter YC-100 system, which also includes a NucleoCassette disposable cassette and lysis buffer (Reagent Y100). The system allows for reliable, fast and objective cell counting based on automated fluorescence microscopy.
SKU: 970-0002
NucleoCounter® SP-100 ™ Mammalian Sperm Cell Counter
NucleoCounter SP-100 is designed for counting sperm in the semen of mammals for the analysis of sperm in the process of artificial insemination in animal husbandry.
SKU: 970-0003
NucleoCounter® NC-100 ™ mammalian cell counter
The NucleoCounter® NC-100 ™ Mammalian Cell Counter is an imaging cytometer based on the fluorescence of the dye, propidium iodide (PI).
SKU: 970-0001
Automatic Cell Counter NucleoCounter NC-200
The NucleoCounter NC-200 is a compact cell counter designed for life sciences and pharmaceutical research. The system is for research purposes only.
SKU: 970-0200