998 (90) 174-57-84
Online analyzers
Filters
Sorting:
SKU: CS-100 Series
Compare
Ammonium analyzers Hach Amtax sc
High-precision industrial device for the determination of ammonium in water, waste water and activated sludge. Amtax sc measures ammonium concentration using a gas selective electrode (GSE). Designed for outdoor or indoor installation.
SKU: LXV421.99.???1
SKU: HF-960EM
CL17 sc Photometric Chlorine Analyzer
The Hach CL17 sc analyzer is used for continuous monitoring and determination of the concentration of free or total residual chlorine in water. Readings are not affected by changes in chlorine concentration, sample pH, temperature, flow rate, or pressure. The CL17 sc is also suitable for measuring residual permanganate content. Research demonstrates the analyzer's analytical capabilities and confirms that it is a reliable solution and a good tool for managing complex water purification and disinfection processes.
SKU: 8574500, 8574400
SKU: HZ-960
CL17sc Colorimetric Chlorine Analyzer, Ultra Low Range 0.008 - 5.0 mg/L Cl2
The CL17sc analyzer is best suited for pure water, which measures either the presence of chlorine in small quantities or its absence. It measures the total chlorine concentration from 0.008 to 5.0 mg/l. If your processes include reverse osmosis membranes or any form of dechlorination such as chemical (eg sulfite/bisulfite) and/or adsorptive (eg activated carbon), then the ultra-low detection range CL17sc can be used to monitor the presence of chlorine at very low levels or its complete absence, depending on the needs of your process and equipment.
SKU: 9790400, 9790500
SKU: HZ-960HPO-M
Industrial analyzer of total organic carbon BioTector B3500e
The B3500e is specifically designed to monitor end water and wastewater discharges in accordance with TOC requirements. Compliance will save you penalty costs while protecting the environment.
SKU: BEAAAA152AAA2
Amperometric sensors for total and free chlorine CLT10 sc and CLF10 sc
The amperometric sensors CLT10 sc and CLF10 sc complement real-time chemical analysis solutions for free and total chlorine in the laboratory and industry. Amperometric sensors continuously monitor the chlorine concentration without the use of reagents. Measurement range 0 - 20 ppm Cl2.
SKU: LXV45A.98.23022, LXV45B.98.23022
SKU: HR-480
TOC analyzer BioTector B7000i
TOC analyzer for petrochemical, airport, pulp and paper, pharmaceutical, wastewater monitoring and food processing applications.
SKU: B7BAAA052AABAA2
Industrial titrator - Ammonium Analyzer EZ4005
The EZ4005 ammonium analyzer is a single parameter titrator with a wide measuring range: Standard measuring range: 100 - 5000 mg/L NH4-N.
SKU: EZ4005.99001C02
SKU: UV500 ATEX
EZ1006 / EZ1007 Free and Total Chlorine Analyzers
The EZ Series online analyzers offer several options for monitoring chlorine in water. Typical applications are drinking water, surface water, process water. The EZ1000 Series analyzers use colorimetric method to measure chlorine. EZ1006 Chlorine free. EZ1007 Chlorine, total. Standard measuring range: 0.025 - 1.5 mg / l Cl2.
SKU: EZ1006.99001C02, EZ1007.99001C02
SKU: HC-200NH
SKU: UV500
EZ1002 / EZ1003 Ammonium Colorimetric Analyzer
EZ1002 is a colorimetric measurement of ammonium concentration at 630 nm based on the APHA 3500-NH3 standard method (Berthelot). EZ1003 - colorimetric measurement at 450 nm in accordance with EPA Standard Method 350.1 (Nessler).
SKU: EZ1002.99001C02, EZ1003.99001C02
SKU: HT-110
SKU: EL300
Sorting:
SKU: CS-100 Series
Ammonium analyzers Hach Amtax sc
High-precision industrial device for the determination of ammonium in water, waste water and activated sludge. Amtax sc measures ammonium concentration using a gas selective electrode (GSE). Designed for outdoor or indoor installation.
SKU: LXV421.99.???1
SKU: HF-960EM
CL17 sc Photometric Chlorine Analyzer
The Hach CL17 sc analyzer is used for continuous monitoring and determination of the concentration of free or total residual chlorine in water. Readings are not affected by changes in chlorine concentration, sample pH, temperature, flow rate, or pressure. The CL17 sc is also suitable for measuring residual permanganate content. Research demonstrates the analyzer's analytical capabilities and confirms that it is a reliable solution and a good tool for managing complex water purification and disinfection processes.
SKU: 8574500, 8574400
SKU: HZ-960
CL17sc Colorimetric Chlorine Analyzer, Ultra Low Range 0.008 - 5.0 mg/L Cl2
The CL17sc analyzer is best suited for pure water, which measures either the presence of chlorine in small quantities or its absence. It measures the total chlorine concentration from 0.008 to 5.0 mg/l. If your processes include reverse osmosis membranes or any form of dechlorination such as chemical (eg sulfite/bisulfite) and/or adsorptive (eg activated carbon), then the ultra-low detection range CL17sc can be used to monitor the presence of chlorine at very low levels or its complete absence, depending on the needs of your process and equipment.
SKU: 9790400, 9790500
SKU: HZ-960HPO-M
Industrial analyzer of total organic carbon BioTector B3500e
The B3500e is specifically designed to monitor end water and wastewater discharges in accordance with TOC requirements. Compliance will save you penalty costs while protecting the environment.
SKU: BEAAAA152AAA2
Amperometric sensors for total and free chlorine CLT10 sc and CLF10 sc
The amperometric sensors CLT10 sc and CLF10 sc complement real-time chemical analysis solutions for free and total chlorine in the laboratory and industry. Amperometric sensors continuously monitor the chlorine concentration without the use of reagents. Measurement range 0 - 20 ppm Cl2.
SKU: LXV45A.98.23022, LXV45B.98.23022
SKU: HR-480
TOC analyzer BioTector B7000i
TOC analyzer for petrochemical, airport, pulp and paper, pharmaceutical, wastewater monitoring and food processing applications.
SKU: B7BAAA052AABAA2
Industrial titrator - Ammonium Analyzer EZ4005
The EZ4005 ammonium analyzer is a single parameter titrator with a wide measuring range: Standard measuring range: 100 - 5000 mg/L NH4-N.
SKU: EZ4005.99001C02
SKU: UV500 ATEX
EZ1006 / EZ1007 Free and Total Chlorine Analyzers
The EZ Series online analyzers offer several options for monitoring chlorine in water. Typical applications are drinking water, surface water, process water. The EZ1000 Series analyzers use colorimetric method to measure chlorine. EZ1006 Chlorine free. EZ1007 Chlorine, total. Standard measuring range: 0.025 - 1.5 mg / l Cl2.
SKU: EZ1006.99001C02, EZ1007.99001C02
SKU: HC-200NH
SKU: UV500
EZ1002 / EZ1003 Ammonium Colorimetric Analyzer
EZ1002 is a colorimetric measurement of ammonium concentration at 630 nm based on the APHA 3500-NH3 standard method (Berthelot). EZ1003 - colorimetric measurement at 450 nm in accordance with EPA Standard Method 350.1 (Nessler).
SKU: EZ1002.99001C02, EZ1003.99001C02
SKU: HT-110
SKU: EL300
