Probes and sensors
This section of the catalog presents a wide selection of Hach Lange Intellical probes and electrodes for the most demanding laboratory and field tasks in the following parameters: pH, dissolved oxygen, BOD, conductivity, TDS, ORP, ammonia, ammonium, chloride, fluoride, nitrate and sodium. All Intellical probes are automatically recognized by the HQ / HQD series meters and retain their calibration data, eliminating the need to recalibrate when switching between meters. The Red Rod pH electrodes provide exceptional performance and response times for a wide variety of sample types in the laboratory. The rugged outdoor sensors are housed in a stainless steel housing and, thanks to digital technology, can be used with cables up to 30 meters. In addition to sensors and electrodes, this section contains solutions for sensor maintenance, conductivity standards and pH buffers.
Sorting:
Intellical PHC729 RedRod refillable surface ph electrode, 1 m cable
High-performance Red Rod technology is now available for the HQD digital platform. Intellical PHC729 is a digital combination pH electrode with built-in temperature sensor.
SKU: PHC72901, PHC72901AP
Powder Pillows buffer pH 10.01 (blue), 15 pcs
Sealed bags with powder for pH electrode calibration.
SKU: 2227195
Certified Buffer Standard Solution, pH 6,865
Certified Buffer Standard Solution, pH 6,865 ±0.010 pH at 25°C, 500 mL.
SKU: S11M003
Certified Conductivity Standard Solution, 12,85 mS/cm
Calibration solution for conductometers with standard conductivity, concentration 12.85 mS / cm ± 0.5% (k = 2) at 25 ° C, 500 ml.
SKU: S51M002
Optical point SP-PSt7-NAU for oxygen sensor PreSens
Optical points SP-PSt7-NAU and SP-PSt7-YAU for PreSens oxygen sensors allow O2 measurements from 0 to 100% with a detection limit of 0.03%. SP-PSt7-NAU - not autoclavable. SP-PSt7-YAU - autoclavable.
SKU: SP-PSt7-NAU, SP-PSt7-YAU
LDO sc process dissolved oxygen sensor; cable 10 meters
LDO Process Dissolved Oxygen Sensor for SC Series Online Controllers. Available with 10 meter cable.
SKU: LXV416.99.20001
51302070 Buffer pH 9.21 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302070
OXY-2GO Portable O2 Analyzer for Beer by Haffmans Pentair
The Pentair Haffmans Oxy-2Go is a portable analyzer designed specifically for small breweries that require an economical and reliable solution for monitoring dissolved oxygen (DO). It provides accurate measurement of the full range of oxygen in wort, beer and other carbonated beverages using proven Pentair Haffmans optical technology.
SKU: OXY-2GO
SKU: СDC40105
SKU: HD-960L
ISE Standard sodium solution (Na +) concentration 100 mg/l; volume 500 ml, 1 L
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 2318149, 2318153
Ionic Strength Adjustor (ISA) Fluoride, 100 pieces
Ionic Strength Adjustor for Hach Ion Selective Electrodes.
SKU: 258999
Ion Selective Electrode (ISE) Intellical ISENH4181, ammonium (NH4 +); cable 1, 3 m
The Intellical ISENH4181 is a digital Ion Selective Electrode (ISE) with Dritek disposable gel, a porous Teflon annular diaphragm and an integrated temperature sensor.
SKU: ISENH418101, ISENH418103
Intellical PHC735 RedRod refillable ph electrode for dirty media, 1 m cable
High-performance Red Rod technology is now available for the HQD digital platform. Intellical PHC735 is a digital combination pH electrode with built-in temperature sensor.
SKU: PHC73501, PHC73501AP
Powder Pillows buffer, pH 6.86, 15 pcs.
Calibration buffer for pH meter in powder form for dilution.
SKU: 1409895
Certified Buffer Standard Solution, pH 4,005
Certified Buffer Standard Solution, pH 4.005 ±0.010 pH at 25°C, 500 mL.
SKU: S11M002
Calibration solution for conductivity meter 147 μS/cm, KCl, 250 ml
Sodium chloride standard solution for checking the accuracy of the conductivity analysis procedure of the aqueous solution and the instrument being measured.
SKU: LZW9700.99
Optical point SP-PSt8-NAU for oxygen sensor PreSens
Optical points SP-PSt8-NAU and SP-PSt8-YAU for PreSens oxygen sensors allow O2 measurement in the range from 0 to 10%, detection limit - 0.007%. SP-PSt8-NAU - not autoclavable. SP-PSt8-YAU - autoclavable.
SKU: SP-PSt8-NAU, SP-PSt8-YAU
51302079 Buffer pH 10.01 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302079
SKU: 7501
SKU: AquaMaster
SKU: GX-100
Filling Solution, Reference, 3 M KCl with AgCl, 28 mL
Filling solution for electrode reference element, Potassium Chloride (KCl) with Saturated AgCl, 3 M, 28 mL bottle.
SKU: 2841700
Chloride Standard Solution, 100 mg/L, 1 L
ISE Standard Solution. Chloride, 0,00282 mol/L ± 0.00003 mol/L / 100 mg/L ±1 mg/L Cl-. 1 L bottle.
SKU: 2370853
Sorting:
Intellical PHC729 RedRod refillable surface ph electrode, 1 m cable
High-performance Red Rod technology is now available for the HQD digital platform. Intellical PHC729 is a digital combination pH electrode with built-in temperature sensor.
SKU: PHC72901, PHC72901AP
Powder Pillows buffer pH 10.01 (blue), 15 pcs
Sealed bags with powder for pH electrode calibration.
SKU: 2227195
Certified Buffer Standard Solution, pH 6,865
Certified Buffer Standard Solution, pH 6,865 ±0.010 pH at 25°C, 500 mL.
SKU: S11M003
Certified Conductivity Standard Solution, 12,85 mS/cm
Calibration solution for conductometers with standard conductivity, concentration 12.85 mS / cm ± 0.5% (k = 2) at 25 ° C, 500 ml.
SKU: S51M002
Optical point SP-PSt7-NAU for oxygen sensor PreSens
Optical points SP-PSt7-NAU and SP-PSt7-YAU for PreSens oxygen sensors allow O2 measurements from 0 to 100% with a detection limit of 0.03%. SP-PSt7-NAU - not autoclavable. SP-PSt7-YAU - autoclavable.
SKU: SP-PSt7-NAU, SP-PSt7-YAU
LDO sc process dissolved oxygen sensor; cable 10 meters
LDO Process Dissolved Oxygen Sensor for SC Series Online Controllers. Available with 10 meter cable.
SKU: LXV416.99.20001
51302070 Buffer pH 9.21 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302070
OXY-2GO Portable O2 Analyzer for Beer by Haffmans Pentair
The Pentair Haffmans Oxy-2Go is a portable analyzer designed specifically for small breweries that require an economical and reliable solution for monitoring dissolved oxygen (DO). It provides accurate measurement of the full range of oxygen in wort, beer and other carbonated beverages using proven Pentair Haffmans optical technology.
SKU: OXY-2GO
SKU: СDC40105
SKU: HD-960L
ISE Standard sodium solution (Na +) concentration 100 mg/l; volume 500 ml, 1 L
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 2318149, 2318153
Ionic Strength Adjustor (ISA) Fluoride, 100 pieces
Ionic Strength Adjustor for Hach Ion Selective Electrodes.
SKU: 258999
Ion Selective Electrode (ISE) Intellical ISENH4181, ammonium (NH4 +); cable 1, 3 m
The Intellical ISENH4181 is a digital Ion Selective Electrode (ISE) with Dritek disposable gel, a porous Teflon annular diaphragm and an integrated temperature sensor.
SKU: ISENH418101, ISENH418103
Intellical PHC735 RedRod refillable ph electrode for dirty media, 1 m cable
High-performance Red Rod technology is now available for the HQD digital platform. Intellical PHC735 is a digital combination pH electrode with built-in temperature sensor.
SKU: PHC73501, PHC73501AP
Powder Pillows buffer, pH 6.86, 15 pcs.
Calibration buffer for pH meter in powder form for dilution.
SKU: 1409895
Certified Buffer Standard Solution, pH 4,005
Certified Buffer Standard Solution, pH 4.005 ±0.010 pH at 25°C, 500 mL.
SKU: S11M002
Calibration solution for conductivity meter 147 μS/cm, KCl, 250 ml
Sodium chloride standard solution for checking the accuracy of the conductivity analysis procedure of the aqueous solution and the instrument being measured.
SKU: LZW9700.99
Optical point SP-PSt8-NAU for oxygen sensor PreSens
Optical points SP-PSt8-NAU and SP-PSt8-YAU for PreSens oxygen sensors allow O2 measurement in the range from 0 to 10%, detection limit - 0.007%. SP-PSt8-NAU - not autoclavable. SP-PSt8-YAU - autoclavable.
SKU: SP-PSt8-NAU, SP-PSt8-YAU
51302079 Buffer pH 10.01 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302079
SKU: 7501
SKU: AquaMaster
SKU: GX-100
Filling Solution, Reference, 3 M KCl with AgCl, 28 mL
Filling solution for electrode reference element, Potassium Chloride (KCl) with Saturated AgCl, 3 M, 28 mL bottle.
SKU: 2841700
Chloride Standard Solution, 100 mg/L, 1 L
ISE Standard Solution. Chloride, 0,00282 mol/L ± 0.00003 mol/L / 100 mg/L ±1 mg/L Cl-. 1 L bottle.
SKU: 2370853

