Probes and sensors
This section of the catalog presents a wide selection of Hach Lange Intellical probes and electrodes for the most demanding laboratory and field tasks in the following parameters: pH, dissolved oxygen, BOD, conductivity, TDS, ORP, ammonia, ammonium, chloride, fluoride, nitrate and sodium. All Intellical probes are automatically recognized by the HQ / HQD series meters and retain their calibration data, eliminating the need to recalibrate when switching between meters. The Red Rod pH electrodes provide exceptional performance and response times for a wide variety of sample types in the laboratory. The rugged outdoor sensors are housed in a stainless steel housing and, thanks to digital technology, can be used with cables up to 30 meters. In addition to sensors and electrodes, this section contains solutions for sensor maintenance, conductivity standards and pH buffers.
Sorting:
Calibration solution ph 7.00, 250 mL
Buffer solution for calibration and accuracy check of pH electrodes and hydrogen ion meters, pH is 7.00 ± 0.02 pH at 25 °C
SKU: LZW9464.98
Conductivity calibration solution 12.88 mS/cm, KCl, 125 mL
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 125 ml.
SKU: LZW9721.99
Needle micro oxygen sensor NFSG-PSt7
The NFSG-PSt7 Fixed Tip Micro Needle Oxygen Sensor has a measuring range from 0 to 100% oxygen with a detection limit of 0.03% oxygen. Designed for headspace measurement in packaging or other applications where small volume measurements of gaseous oxygen are required.
SKU: NFSG-PSt7
HI770710P pH 7.01 and 10.01 Buffer Sachets (Kit)
Set of calibration buffer solutions pH 7.01 and 10.01 +/- 0.01 pH at 25°C.
SKU: HI770710P
30248832 pH electrode InLab Routine Go-ISM
Combined pH electrode with glass body, built-in temperature sensor, fixed cable and ISM technology. It is intended for work in laboratory and in field conditions.
SKU: 30248832
SKU: 51340333
SKU: HP-480
ISE Ammonia Standard Solution, 10 mg/L, 500 mL
ISE Standard Solution. Ammonia, 10,0 mg/L ±0,5 mg/L NH3-N. 500 mL bottle.
SKU: 15349
Ion Selective Electrode (ISE) Intellical ISENO3181, Nitrate (NO3-); cable 1, 3 m
Intellical ISENO3181 is a digital combined ion selective electrode (ISE) for the determination of nitrates with a built-in temperature sensor.
SKU: ISENO318101, ISENO318103
Buffer Solution, pH 9,23
Buffer Solution, concentration pH 9,23 ± 0,02, 500 mL.
SKU: S11M011
Buffer solution, pH 4,01
Buffer Solution, concentration pH 4,01± 0,02, 500 mL.
SKU: 1222349
Calibration solution ph 10.01, 250 ml
PH buffer solution 10.01 ± 0.02 pH at 25 °C for checking the accuracy of pH meters and electrodes.
SKU: LZW9471.99
Certified Conductivity Standard Solution, 25 μS/cm, NaCl, 250 ml
Calibration solution for salt meters (TDS meter) and conductivity meters.
SKU: S51M013
Needle micro oxygen sensor NFSG-PSt8
The NFSG-PSt8 Fixed Tip Micro Needle Oxygen Sensor is designed for headspace measurement of trace oxygen or other applications where small volume measurements of gaseous oxygen are required. Has a measurement range from 0 to 10% oxygen with a detection limit of 0.007% O2.
SKU: NFSG-PSt8
HI70004P pH 4.01 buffer solution for calibration (25 x 20 ml)
HI70004P contains 25 sachets containing 20 ml buffer solution for calibrating pH meters and electrodes.
SKU: HI70004P
30248830 pH electrode InLab Max Pro-ISM
A versatile pH electrode with a fixed glass collar that prevents contaminants from entering and clogging the connection.
SKU: 30248830
SKU: 51344155
SKU: HP-480TP
Ionic Strength Adjustor Nitrate (ISA), 100 pieces
Ionic Strength Adjustor for Hach Ion Selective Electrodes.
SKU: 2984799
Ion Selective Electrode (ISE) Intellical ISENO3181 Nitrate (NO3-) with calibration reagents
The Intellical Nitrate ISE Analysis Package contains everything you need to determine nitrate (NO3-) with the HQD series meters.
SKU: ISENO3181AP
Singlet Single-Use pH Buffer, pH 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 10,01 ±0.02 at 25°C. Pack of 20 of pH 10,01, 20 mL each.
SKU: 2770220
pH Buffer Solution, pH 10.01
pH Buffer Solution, concentration pH 10.01± 0,02, 500 mL.
SKU: 2283649.99
Conductivity calibration solution 10000 μS/cm, NaCl, 50 ml
Standard solution for calibrating TDS meters and conductivity meters.
SKU: 2972226
Oxygen Probe for In-Line Measurement OIM-PSt3
PreSens OIM-PSt3 is designed for process control and provides accurate and stable O2 measurements in the 0-100% / 0-45 mg / L range, with a detection limit of 0.03% / 15 ppb.
SKU: OIM-PSt3
Sorting:
Calibration solution ph 7.00, 250 mL
Buffer solution for calibration and accuracy check of pH electrodes and hydrogen ion meters, pH is 7.00 ± 0.02 pH at 25 °C
SKU: LZW9464.98
Conductivity calibration solution 12.88 mS/cm, KCl, 125 mL
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 125 ml.
SKU: LZW9721.99
Needle micro oxygen sensor NFSG-PSt7
The NFSG-PSt7 Fixed Tip Micro Needle Oxygen Sensor has a measuring range from 0 to 100% oxygen with a detection limit of 0.03% oxygen. Designed for headspace measurement in packaging or other applications where small volume measurements of gaseous oxygen are required.
SKU: NFSG-PSt7
HI770710P pH 7.01 and 10.01 Buffer Sachets (Kit)
Set of calibration buffer solutions pH 7.01 and 10.01 +/- 0.01 pH at 25°C.
SKU: HI770710P
30248832 pH electrode InLab Routine Go-ISM
Combined pH electrode with glass body, built-in temperature sensor, fixed cable and ISM technology. It is intended for work in laboratory and in field conditions.
SKU: 30248832
SKU: 51340333
SKU: HP-480
ISE Ammonia Standard Solution, 10 mg/L, 500 mL
ISE Standard Solution. Ammonia, 10,0 mg/L ±0,5 mg/L NH3-N. 500 mL bottle.
SKU: 15349
Ion Selective Electrode (ISE) Intellical ISENO3181, Nitrate (NO3-); cable 1, 3 m
Intellical ISENO3181 is a digital combined ion selective electrode (ISE) for the determination of nitrates with a built-in temperature sensor.
SKU: ISENO318101, ISENO318103
Buffer Solution, pH 9,23
Buffer Solution, concentration pH 9,23 ± 0,02, 500 mL.
SKU: S11M011
Buffer solution, pH 4,01
Buffer Solution, concentration pH 4,01± 0,02, 500 mL.
SKU: 1222349
Calibration solution ph 10.01, 250 ml
PH buffer solution 10.01 ± 0.02 pH at 25 °C for checking the accuracy of pH meters and electrodes.
SKU: LZW9471.99
Certified Conductivity Standard Solution, 25 μS/cm, NaCl, 250 ml
Calibration solution for salt meters (TDS meter) and conductivity meters.
SKU: S51M013
Needle micro oxygen sensor NFSG-PSt8
The NFSG-PSt8 Fixed Tip Micro Needle Oxygen Sensor is designed for headspace measurement of trace oxygen or other applications where small volume measurements of gaseous oxygen are required. Has a measurement range from 0 to 10% oxygen with a detection limit of 0.007% O2.
SKU: NFSG-PSt8
HI70004P pH 4.01 buffer solution for calibration (25 x 20 ml)
HI70004P contains 25 sachets containing 20 ml buffer solution for calibrating pH meters and electrodes.
SKU: HI70004P
30248830 pH electrode InLab Max Pro-ISM
A versatile pH electrode with a fixed glass collar that prevents contaminants from entering and clogging the connection.
SKU: 30248830
SKU: 51344155
SKU: HP-480TP
Ionic Strength Adjustor Nitrate (ISA), 100 pieces
Ionic Strength Adjustor for Hach Ion Selective Electrodes.
SKU: 2984799
Ion Selective Electrode (ISE) Intellical ISENO3181 Nitrate (NO3-) with calibration reagents
The Intellical Nitrate ISE Analysis Package contains everything you need to determine nitrate (NO3-) with the HQD series meters.
SKU: ISENO3181AP
Singlet Single-Use pH Buffer, pH 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 10,01 ±0.02 at 25°C. Pack of 20 of pH 10,01, 20 mL each.
SKU: 2770220
pH Buffer Solution, pH 10.01
pH Buffer Solution, concentration pH 10.01± 0,02, 500 mL.
SKU: 2283649.99
Conductivity calibration solution 10000 μS/cm, NaCl, 50 ml
Standard solution for calibrating TDS meters and conductivity meters.
SKU: 2972226
Oxygen Probe for In-Line Measurement OIM-PSt3
PreSens OIM-PSt3 is designed for process control and provides accurate and stable O2 measurements in the 0-100% / 0-45 mg / L range, with a detection limit of 0.03% / 15 ppb.
SKU: OIM-PSt3

