Automatic film applicator
SKU: AB4400
Manufacturer: TQC Sheen
Availability: Order only
The applicator is available in two models:
AB4400 automatic film applicator - perforated vacuum table with head, 230 VAC.
AB4405 Automatic Film Applicator - Perforated Vacuum Table with 115VAC Head.
Contents of delivery:
- automatic applicator
- test sample table (table type depends on the selected model)
- power Supply
- manual
Applicator conforms to standard: ASTM D823
Description Specifications Recommended products
Description
Description
Differences in speed, pressure and subsidence result in unevenness. Other factors that can affect the result are shear rate and applicator weight. With the automatic film applicator, these variables are stabilized. The film has a uniform thickness over the entire surface. Samples created with the automatic film applicator can be played back. A large number of identical, identical laboratory precision drawdowns can be obtained in a short period of time.
The quality of the applied film is important for the study of rheological properties. An automatic film applicator is required to prepare samples for testing rheological properties, abrasion resistance, hiding power and gloss. Several types of automatic film applicators are available, such as:
- cube film applicator (SKU AB3700)
- four-slot applicator (SKU VF2167)
- multi-film applicator (SKU VF1550)
- spreading and leveling testers (SKU VF2246)
- knife applicator (SKU SH0335)
- Byrd applicator (SKU VF2161)
All appliances for glass / paper / metal substrates or foils. All types of applicators can be used in combination with standard block-type film applicators such as Baker's film applicator, rod applicators depending on the selected configuration.
Contact us for the selection of the applicator you need.
Each automatic film applicator is equipped with a Triple i Control interface. Triple i Control stands for Intelligent Lighting Interface. This unique navigation tool makes the operator's job easier. At each test step, the interface determines which buttons are active and denotes them by an illuminated red center, and all additional information is displayed on the applicator display.
This model is equipped with a perforated heated vacuum layer and has a built-in heating mat that allows the table temperature to be raised to + 100 ° C above the ambient temperature. The powerful heating device guarantees an even temperature distribution throughout the entire vacuum plate. Temperature set and controlled via Triple i Control interface.
Specifications
Applicator speed | 0.1 - 500 mm/s |
Speed accuracy | +/- 1% |
Applicator stroke length | 50 - 430 mm |
Stroke length accuracy | +/- 2 mm |
Maximum size of test chart |
515 x 300 mm |
Maximum sample thickness | 9 mm |
Maximum size of vacuum table |
A3 |
Possible sizes of vacuum tables |
A3, A4, A5 |
Power supply | 220V, 50Hz |
Display | TFT color display |
Dimensions | 490 x 640 x 290 mm |
Weight | 33 kg |
Specifications
Compliance with the standard | ASTM D823 |
Recommended products
Device for determining the strength of the Erichsen method
A device for determining the strength of paints and varnishes with a bowl bend by the Eriksen method.
SKU: SP4400
Device for determining the degree of grinding
Grindometer is a device for determining the degree of grinding in various materials such as paints, varnishes, pigments, fillers, chocolate, etc.
SKU: VF2104
Instrument for measuring the resistance of coatings to abrasion
The abrasion tester is used to test the dry or wet abrasion resistance of coatings, films, paints and varnishes by simulating everyday wear and tear.
SKU: AB6000
Pendulum hardness tester
Pendulum hardness tester for determination of hardness by the Koenig / Persoz method.
SKU: SP0500
Three-angle glossmeter 20° / 60° / 85°
Three-angle gloss meter for measuring gloss.
SKU: SH260C
Digital Krebs Viscometer 480
A modern digital device provides automatic operation of the engine, without weights, which allows direct reading of the exact values in Krebs units, mPa · s (cP) or grams.
SKU: SH1349
Opac meter for portable covering measuring
Portable reflectometer for measuring opacity or gray scale reflectivity.
SKU: SH0657
Color comparison camera VF 0600 / VF 1200
The camera is equipped with a multi-source viewing system for checking and color matching of inks, paints, plastics, cosmetics, textiles, knitwear, leather, food, paper, dyes and other colored materials.
SKU: VF0600
Recommended products
Three-angle glossmeter 20° / 60° / 85°
Three-angle gloss meter for measuring gloss.
SKU: SH260C
Digital Krebs Viscometer 480
A modern digital device provides automatic operation of the engine, without weights, which allows direct reading of the exact values in Krebs units, mPa · s (cP) or grams.
SKU: SH1349
Pendulum hardness tester
Pendulum hardness tester for determination of hardness by the Koenig / Persoz method.
SKU: SP0500
Device for determining the degree of grinding
Grindometer is a device for determining the degree of grinding in various materials such as paints, varnishes, pigments, fillers, chocolate, etc.
SKU: VF2104
Opac meter for portable covering measuring
Portable reflectometer for measuring opacity or gray scale reflectivity.
SKU: SH0657
Color comparison camera VF 0600 / VF 1200
The camera is equipped with a multi-source viewing system for checking and color matching of inks, paints, plastics, cosmetics, textiles, knitwear, leather, food, paper, dyes and other colored materials.
SKU: VF0600
Device for determining the strength of the Erichsen method
A device for determining the strength of paints and varnishes with a bowl bend by the Eriksen method.
SKU: SP4400
Instrument for measuring the resistance of coatings to abrasion
The abrasion tester is used to test the dry or wet abrasion resistance of coatings, films, paints and varnishes by simulating everyday wear and tear.
SKU: AB6000