998 (90) 174-57-84
Device for determining the degree of grinding
SKU: VF2104
Manufacturer: TQC Sheen
Availability: Order only
Contents of delivery:
- grindometer
- scraper
- case for storage and transportation
- factory calibration certificate
- instruction manual
Complies with standards: ASTM D1084, ASTM D1210, ASTM D1316, DIN 53203, DIN EN ISO NF21524, FTMS 141 a, ISO 1524, M.4411.1, NF T 30-046, GOST 6589.
Description Specifications Video Recommended products
Description
Description
The device is a block made of hardened stainless steel with one or two slots with increasing depth and an included scraper for spreading the material. Graduation can be applied to the top or side of the block in μm, Hegman, or PCU. The gauge and bevelled scraper are made of Sub Zero vacuum hardened stainless tool steel and are accurate to 2 microns.
The measuring range of grindometers and the type of groove and scale division for various modifications correspond to the characteristics indicated below:
| SKU | Groove type (width) | Value of division |
Measuring range |
|
VF2110 |
two grooves (2x12 mm) |
1.5 μm |
0 - 15 μm, 10 - 8.5 PCU, 8 - 6.8 Hegman |
| VF2111 | two grooves (2x12 mm) | 2.5 μm | 0 - 25μm, 10 - 7.5 PCU, 8 - 6 Hegman (NS) |
| VF2112 | two grooves (2x12 mm) | 5μm | 0 - 50 μm, 10 - 5 PCU, 8 - 4 Hegman (NS) |
| VF2113 | two grooves (2x12 mm) | 10μm | 0 - 100 μm, 10 - 0 PCU, 8 - 0 Hegman (NS) |
| VF2118 | two grooves (2x12 mm) | 25μm | 0 - 250 μm, 10 - 0 PCU, 8 - 0 Hegman (NS) |
| VF2124 | two grooves (2x12 mm) | 50μm | 0 - 500 μm, 10 - 0 PCU, 8 - 0 Hegman (NS) |
| VF2104 | one groove (12 mm) | 1.5 μm | 0 - 15μm |
| VF2105 | one groove (12 mm) | 2.5 μm | 0 - 25 μm |
| VF2106 | one groove (12 mm) | 5μm | 0 - 50μm |
| VF2107 | one groove (12 mm) | 10μm | 0 - 100 μm |
| VF2108 | one groove (12 mm) | 25μm | 0 - 250 μm |
| VF2120 | one wide groove (37 mm) | 1.5 μm | 0 - 15 μm, 8 - 6.8 ns (Hegman) |
| VF2121 | one wide groove (37 mm) | 2.5 μm | 0 - 25 μm, 8 - 6 ns (Hegman) |
| VF2122 | one wide groove (37 mm) | 5μm | 0 - 50 μm, 8 - 4 ns (Hegman) |
| VF2123 | one wide groove (37 mm) | 10μm | 0 - 100 μm, 8 - 0 NS (Hegman) |
Specifications
| Compliance with the standard | ГОСТ 6589, NF T 30-046, M.4411.1, ISO 1524, FTMS 141 a, DIN EN ISO NF21524, DIN 53203, ASTM D1316, ASTM D1210, ASTM D1084 |
Recommended products
Opac meter for portable covering measuring
Portable reflectometer for measuring opacity or gray scale reflectivity.
SKU: SH0657
CompareColor comparison camera VF 0600 / VF 1200
The camera is equipped with a multi-source viewing system for checking and color matching of inks, paints, plastics, cosmetics, textiles, knitwear, leather, food, paper, dyes and other colored materials.
SKU: VF0600
Automatic film applicator
The automatic film applicator provides a secure base for applying film to test charts, panels or foil.
SKU: AB4400
Pendulum hardness tester
Pendulum hardness tester for determination of hardness by the Koenig / Persoz method.
SKU: SP0500
Three-angle glossmeter 20° / 60° / 85°
Three-angle gloss meter for measuring gloss.
SKU: SH260C
Device for determining the strength of the Erichsen method
A device for determining the strength of paints and varnishes with a bowl bend by the Eriksen method.
SKU: SP4400
Instrument for measuring the resistance of coatings to abrasion
The abrasion tester is used to test the dry or wet abrasion resistance of coatings, films, paints and varnishes by simulating everyday wear and tear.
SKU: AB6000
Digital Krebs Viscometer 480
A modern digital device provides automatic operation of the engine, without weights, which allows direct reading of the exact values in Krebs units, mPa · s (cP) or grams.
SKU: SH1349
Recommended products
Three-angle glossmeter 20° / 60° / 85°
Three-angle gloss meter for measuring gloss.
SKU: SH260C
Automatic film applicator
The automatic film applicator provides a secure base for applying film to test charts, panels or foil.
SKU: AB4400
Pendulum hardness tester
Pendulum hardness tester for determination of hardness by the Koenig / Persoz method.
SKU: SP0500
Opac meter for portable covering measuring
Portable reflectometer for measuring opacity or gray scale reflectivity.
SKU: SH0657
Digital Krebs Viscometer 480
A modern digital device provides automatic operation of the engine, without weights, which allows direct reading of the exact values in Krebs units, mPa · s (cP) or grams.
SKU: SH1349
Color comparison camera VF 0600 / VF 1200
The camera is equipped with a multi-source viewing system for checking and color matching of inks, paints, plastics, cosmetics, textiles, knitwear, leather, food, paper, dyes and other colored materials.
SKU: VF0600
Instrument for measuring the resistance of coatings to abrasion
The abrasion tester is used to test the dry or wet abrasion resistance of coatings, films, paints and varnishes by simulating everyday wear and tear.
SKU: AB6000
Device for determining the strength of the Erichsen method
A device for determining the strength of paints and varnishes with a bowl bend by the Eriksen method.
SKU: SP4400
