Portable oxygen meter Fibox 3 LCD trace v9
SKU: Fibox 3 LCD trace v9
Manufacturer: РreSens
Availability: Order only
Fibox 3 LCD trace v9 is a portable oxygen meter with display, built-in data logger, rechargeable batteries and programmable analog outputs. The Oximeter can be used with normal, low and ultra-low O2 sensors.
Scope of delivery: Fibox 3 LCD trace v9 oximeter, LCDTRACEv205 software, RS232 cable, power supply (100 - 240 VAC, 18 VDC), PT1000 temperature sensor, instruction manual.
Description Specifications Recommended products Accessories
Description
Description
Fibox 3 LCD trace is a standalone optical O2 meter. It is temperature compensated and used with oxygen sensors based on 2mm optical fiber.
The portable autonomous optical oxygen meter PreSens Fibox 3 LCD is used to measure O2 with sensors of the PSt3 type (detection limit 15 ppb, 0 - 100% oxygen), type PSt6 (detection limit 1 ppb, 0 - 5% oxygen) and PSt9 (detection limit 0 , 5 ppmv, 0 - 200 ppmv oxygen).
Fibox 3 LCD trace is a portable instrument with a rechargeable battery and an integrated data logger. It can be operated using the built-in programmable LCD control panel. Alternatively, the oxygen meter can be connected to a PC for measurements.
Advantages of the Fibox 3 LCD trace v9 oximeter
- For use with non-invasive oxygen sensors, FTC and touch probes.
- Portable device with rechargeable battery
- One calibration for many sensors
- Signal independent of sample flow rate
The Fibox 3 LCD Oxygen Meter is based on a new technology that provides very stable and accurate measurements. This allows it to be used flexibly in various fields.
Compared to standard electrodes, optical sensors have: very fast response times and very easy to maintain. They can be fully autoclaved and sterilized (CIP and SIP).
Fibox 3 LCD trace oximeter specifications
- Temperature sensor: Pt1000 (sensor included)
- Temperature range: 0 °C to + 50 °C, resolution ± 0.1 °C, accuracy ± 1.0 °C
- Maximum. battery life: 8 hours (sampling rate 1 sec.)
- Operating / storage temperature: 0 ° C to + 50 ° C / - 10 ° C to + 60 ° C
- Relative humidity: up to 80% (non-condensing)
- Digital interface: RS232 interface (RJ 11 4/4 - DSub9, cable included); USB interface (RJ 11 4/4 - USB type A, included cable adapted to the transmitter)
- Analog interface:
dual current output, 4-20 mA, galvanically isolated, programmable O2 range
dual voltage output, 0-10 V, galvanically isolated, programmable O2 range
dual voltage input, 0-10 V, galvanically isolated, 12 bit resolution, programmable - Display: Dot Matrix LCD, Keypad - 4 Keys
- Data logger: 25,000 data sets, export via software
- Power supply: 16.8 VDC / max. 2 A
- Dimensions: 215mm x 120mm x 95mm
- Weight: 1.65kg
Specifications
Application area | Pharmaceuticals, Food production, Beverages |
Type | Portable |
Industry | Pharmaceutical, Food and Beverage |
Parameters | Dissolved oxygen, Oxygen |
Measurement Range | 0 - 100% O2 |
Compatibility | PSt3, PSt6, PSt9 |
Operating temperature range | 0 - 50 °C |
Recommended products
Portable oxygen meter Fibox 4 trace
The Fibox 4 trace is a portable and fully self-contained optical oxygen meter for measuring O2 levels. Compatible with oxygen sensors ranging from 1 ppb to 100%
SKU: Fibox 4 trace
Oxygen Probe for In-Line Measurement OIM-PSt3
PreSens OIM-PSt3 is designed for process control and provides accurate and stable O2 measurements in the 0-100% / 0-45 mg / L range, with a detection limit of 0.03% / 15 ppb.
SKU: OIM-PSt3
Oxygen Probe for In-Line Measurement OIM-PSt6
PreSens OIM-PSt6 is designed for process control and provides accurate and stable O2 measurements in the 0-5% / 0-2 mg/L range, with a detection limit of 0.002% / 1 ppb.
SKU: OIM-PSt6
Accessories
Polymer Optical Fiber for PreSens Measuring Instruments
Polymer optical fiber serves as a universal connector between the meter and the PreSens. POV with SMA connector is compatible with Fibox, OXY-1 SMA, OXY-1 WM, OXY mini and pH mini meters, as well as pCO2 mini. POF with ST connector is compatible with Microx 4 and OXY-1 ST series meters.
SKU: POF
Related products
Optical point SP-PSt3-NAU for oxygen sensor PreSens
The optical point is the most versatile version of the non-invasive optical oxygen sensors. SP-PSt3-NAU has a measuring range from 0 to 100% oxygen in dissolved or gas phase
SKU: SP-PSt3-NAU
Optical point SP-PSt6-YAU for oxygen sensor PreSens
The optical point is the most versatile version of optical oxygen sensors. Dissolved and gaseous oxygen is measured in a non-contact way through the transparent wall of the container. SP-PSt6-YAU has a measuring range of 0 to 5% oxygen in dissolved or gas phase.
SKU: SP-PSt6-YAU
Optical point SP-PSt9 for oxygen sensor PreSens
Optical point SP-PSt9 for non-invasive measurement of ultra-low oxygen content in the range of 0 - 200 ppmv O2, with a detection limit of 0.5 ppmv oxygen.
SKU: SP-PSt9-NAU-D3-OIW
Self-adhesive optical point SP-PSt3-SA for oxygen sensor PreSens
Optical point SP-PSt3-SA for non-invasive online monitoring of oxygen in the dissolved or gaseous phase in the range of 0 - 100%, 0 - 45 mg/l.
SKU: SP-PSt3-SA
Show more
Recommended products
Portable oxygen meter Fibox 4 trace
The Fibox 4 trace is a portable and fully self-contained optical oxygen meter for measuring O2 levels. Compatible with oxygen sensors ranging from 1 ppb to 100%
SKU: Fibox 4 trace
Oxygen Probe for In-Line Measurement OIM-PSt3
PreSens OIM-PSt3 is designed for process control and provides accurate and stable O2 measurements in the 0-100% / 0-45 mg / L range, with a detection limit of 0.03% / 15 ppb.
SKU: OIM-PSt3
Oxygen Probe for In-Line Measurement OIM-PSt6
PreSens OIM-PSt6 is designed for process control and provides accurate and stable O2 measurements in the 0-5% / 0-2 mg/L range, with a detection limit of 0.002% / 1 ppb.
SKU: OIM-PSt6