998 (90) 174-57-84
A critical element of disinfection is accurate dosing and monitoring of the ClO2 level in the water. Adding chlorine dioxide in the right concentration saves material, protects the environment and the health of the end user of your product. Continuously monitor the chlorine dioxide level in the water with the Hach Lange 9187 sc analyzer.
Food and Beverage
Dissolved Oxygen in Beer
The control of oxygen at all stages is an important and integral part of the beer production process. AquaAnalytics specialists have many years of experience working with breweries of various sizes, which allows them to detect even hidden defects and find solutions to the most complex problems.
Products
DR3900 Spectrophotometer without RFID Technology
Split Beam Laboratory VIS Spectrophotometer (320-1100 nm) with over 220 pre-programmed methods optimized for laboratory water analysis.
SKU: LPV440.98.00001
Compare
LCK014, COD cuvette test 1000 - 10000 mg/L O2
COD reagent kit, measuring range 1000 - 10000 mg/L O2.
SKU: LCK014
HQ30D + LBOD set (HQ30D meter, LBOD sensor, 6 BOD bottles, meter stand)
HQ30D is a portable single channel meter. This kit includes HQ30D device + a dissolved oxygen sensor for determining BOD LBDO101, cable length 1 m.
SKU: HQ30D.99.701000
SC200 Digital 2-channel controller
HACH LANGE is a recognized leader in water analysis solutions. More than 40 different analog and digital sensors can be combined with the SC 200. Thanks to its robust metal housing, the SC 200 is suitable for industrial applications.
SKU: LXV404.99.00551
TL2300 Tungsten Lamp Turbidimeter, EPA, 0 - 4000 NTU
The new TL23 Series laboratory turbidity meters combine proven technology and advanced features to simplify industrial and wastewater analysis. Model - TL2300 EPA. Light source: tungsten lamp. Measurement method: nephelometric. Measuring range: 0 - 4000 NTU.
SKU: LPV444.99.00210
Dual input meter HQ40D with dissolved oxygen probe LDO101 + conductivity cell CDC401
Portable two-channel multi-parameter device HQ40D for measuring pH, ORP, conductivity, TDS, resistivity, salinity, dissolved oxygen and BOD complete with laboratory sensor for dissolved oxygen LDO101 and conductivity sensor CDC401, cable length 1 m.
SKU: HQ40D.99.201301
LCK1414, COD cuvette test 5 - 60 mg/L O2
COD reagent kit, measuring range 5 - 60 mg/L O2.
SKU: LCK1414
HQ40D Dual Channel Meter with Conductivity Cell CDC401 + PHC Series pH Electrode
Portable two-channel multi-parameter device HQ40D for measuring pH, ORP, conductivity, TDS, resistivity, salinity, dissolved oxygen and BOD complete with conductivity sensor CDC401 and pH electrode of the PHC series with various cable lengths and in various designs.
SKU: HQ40D.99.101201
DR6000 UV VIS Spectrophotometer without RFID
The DR6000 is the most advanced laboratory spectrophotometer in the industry. It offers high-speed UV and Visible wavelength scanning and comes with over 250 pre-programmed methods that include the most common testing methods used in water analysis.
SKU: LPV441.99.00001
HQ30D Digital multi meter kit, with Dissolved Oxygen Sensor LDO101
The HQ30D is a handheld, single-channel meter for measuring pH, ORP, conductivity, TDS, resistivity, salinity and dissolved oxygen. This kit - HQ30D device + LDO101 dissolved oxygen sensor, cable length 1 m; 3m; 5 m; 10 m; 15 m; 30m.
SKU: HQ30D.99.301000
HQ30D Portable Single Input Multi-Parameter Meter with pH Electrode PHC201
The HQ30D is a handheld, single-channel meter for measuring pH, ORP, conductivity, TDS, resistivity, salinity and dissolved oxygen. This set - HQ30D device + pH electrode PHC201, cable length 1 m; 3m.
SKU: HQ30D.99.121000
LCK302 Ammonium cuvette test, 47 - 130 mg/L NH4-N
Reagent kit LCK302 for the determination of Ammonium, measuring range 47 - 130 mg/L NH4-N.
SKU: LCK302
Stablcal Turbidity Standards Calibration Kit, 0 - 4000 NTU
Five ready to use, stabilised Formazin Primary standard solutions. Kit includes sealed vials of each: <0,1 NTU, 20 NTU, 200 NTU, 1000 NTU, 4000 NTU.
SKU: 2662105
Dual input meter HQ40D with pH electrode PHC201
Portable two-channel multi-parameter instrument HQ40D for measuring pH, ORP, conductivity, TDS, resistivity, salinity, dissolved oxygen and BOD, complete with a standard pH gel electrode of the PHC201 series with various cable lengths.
SKU: HQ40D.99.121000
LCK304 Ammonium cuvette test, 0,015 - 2,0 mg/L NH4-N
Reagent kit LCK304 for the determination of Ammonium, measuring range 0,015 - 2,0 mg/L NH4-N / 0,02 - 2,5 mg/L NH4.
SKU: LCK304
HI7031L KCl solution with a standard conductivity of 1413 µS/cm
The HI7031L is a premium conductivity standard with a conductivity value of 1413 µS/cm, based on a NIST traceable potassium chloride solution.
SKU: HI7031L
LCI400 COD cuvette test, 0 - 1000 мг/л O2
A set of reagents for the determination of COD; measuring range 0 - 1000 mg/L O2
SKU: LCI400
51350010 Buffer pH 10.00, 250 ml
Technical buffer solution for calibration of ph meters and electrodes.
SKU: 51350010
LCK341 Nitrite cuvette test, 0,015 - 0,6 mg/L NO2-N
A set of reagents for the determination of nitrites, measuring range 0,015 - 0,6 mg/L NO2-N.
SKU: LCK341
NitriVer 3 Nitrite Reagent Powder Pillows, 0,002 - 0,300 mg/L NO2-N
NitriVer 3 Powder Pillows Reagents for Nitrite determination, measuring range 0,002 - 0,300 mg/L NO2-N.
SKU: 2107169
Dual input meter HQ40D with pH electrode PHC301
Portable two-channel multi-parameter instrument HQ40D for measuring pH, ORP, conductivity, TDS, resistivity, salinity, dissolved oxygen and BOD, with Laboratory General Purposes Refillable pH Electrode PHC301.
SKU: HQ40D.99.151000
LCK329 Copper cuvette test 0,1 - 8,0 mg/L Cu
A set of reagents for the determination of Сopper, measuring range 0,1 - 8,0 mg / L Cu.
SKU: LCK329
LCK339 Nitrate cuvette test, 0,23 - 13,5 mg/L NO3-N
Reagent kit for the determination of Nitrate, measuring range 0,23 - 13,5 mg/L NO3-N.
SKU: LCK339
LCK314 COD cuvette test, 15 - 150 mg/L O2
Ragents set for COD determination, measuring range 15 - 150 mg/L O2
SKU: LCK314
