A critical element of disinfection is accurate dosing and monitoring of the ClO2 level in the water. Adding chlorine dioxide in the right concentration saves material, protects the environment and the health of the end user of your product. Continuously monitor the chlorine dioxide level in the water with the Hach Lange 9187 sc analyzer.
Products
Portable oxygen meter Fibox 4 trace
The Fibox 4 trace is a portable and fully self-contained optical oxygen meter for measuring O2 levels. Compatible with oxygen sensors ranging from 1 ppb to 100%
SKU: Fibox 4 trace
Seam System 200B quality control system for beverage cans
Analysis of the can double seam.
SKU: SS200Bev
Bottle Turner CanNeed BT-100 (analogue of BT-002 Lg-automatic)
Bottle inverter CanNeed BT-100 is a complete analogue of BT-002 Lg-automatic, designed for shaking bottles and cans with a product
SKU: BT-100
Torque tester ST-C3
The ST-C3 torque tester is a precision electronic instrument for manual torque measurement. The Sure Torque Tester comes calibrated with a calibration certificate.
SKU: ST-C3
Seam System 100B quality control system for beverage cans
Analysis of the can double seam.
SKU: SS100Bev
Seam System 500B quality control for aluminum beverage cans
Analysis of the can double seam.
SKU: SS500Bev
Automatic can measuring system Yi-C Check BMS-1000
BMS-1000 Yi-C Check is designed to automatically measure can height, neck inner diameter and flange width.
SKU: BMS-1000
Portable Seam System GT Can Seam Analysis
Portable solution for quality control of tin packaging.
SKU: SSGT
Singlet Single-use Conductivity Standard Solution, 147 µS/cm
Conductivity Standard Solution. Concentration 147 µS/cm at 25°C ±10% at 25°C. Pack of 20, 20 mL each.
SKU: 2771320
Buckle Tester for Cans Yi-C Check CBT-400
The Yi-C Check CBT-400 Buckle Tester is designed to automatically measure the pressure at which the bottom of a can bends.
SKU: CBT-400
Seam System 100F for can double seam evaluation
Computer system for quality control of various parameters of cans intended for food products.
SKU: SS100Food
Bottle Squareness Tester CanNeed VAT-300
VAT-300 is designed to measure the perpendicularity deviation of the bottle walls.
SKU: VAT-300
Can Axial Load Tester AXL-4000 Yi-C Check
The AXL-4000 tester from the manufacturer Yi-C Check measures the resistance of metal cans to axial load. Suitable for samples of different sizes. After measurement, the maximum value is displayed on the screen. Measuring range: 3000 N.
SKU: AXL-4000
DR300 Pocket Colorimeter, Molybdenum, LR/HR
Hach DR 300 pocket single-parameter colorimeter for measuring Molybdenum (LR/HR) consentration in water. Measuring ranges: 0.02 - 3.00 mg/L Mo and 0.1 - 12.0 mg/L Mo
SKU: LPV445.99.10110
Seam System 500F for can double seam analysis
Computer system for analyzing the seam of cans designated for food products.
SKU: SS500Food
Seam System 200F for can double seam quality analysis
A computer system which consists of several components (gauges) for quality control of the seam of a can with food products.
SKU: SS200Food
Self-adhesive optical point SP-PSt3-SA for oxygen sensor PreSens
Optical point SP-PSt3-SA for non-invasive online monitoring of oxygen in the dissolved or gaseous phase in the range of 0 - 100%, 0 - 45 mg/l.
SKU: SP-PSt3-SA
Thickness gauge CanNeed MBT-300 on the Hall effect
Canneed's MBT-300 Hall Effect Thickness Tester is an advanced portable bottle thickness tester. It can measure the thickness of non-magnetic materials such as plastic, glass, synthetics, aluminum, titanium and other non-destructive methods.
SKU: MBT-300
Needle micro oxygen sensor NFSG-PSt7
The NFSG-PSt7 Fixed Tip Micro Needle Oxygen Sensor has a measuring range from 0 to 100% oxygen with a detection limit of 0.03% oxygen. Designed for headspace measurement in packaging or other applications where small volume measurements of gaseous oxygen are required.
SKU: NFSG-PSt7
CND-SST-3 CanNeed Cap Leakage Tester
The SST-3 lid tightness tester is used to check the tightness of the lids of glass and plastic containers and cans. The SST-3 device is designed for special tasks related to the closing of cans and bottles using threaded aluminum caps, crown caps, plastic caps.
SKU: CND-SST-3
Needle micro oxygen sensor NFSG-PSt8
The NFSG-PSt8 Fixed Tip Micro Needle Oxygen Sensor is designed for headspace measurement of trace oxygen or other applications where small volume measurements of gaseous oxygen are required. Has a measurement range from 0 to 10% oxygen with a detection limit of 0.007% O2.
SKU: NFSG-PSt8
CanNeed HWC-100 Hot Wire Bottle Cutter
The HWC-100 is a simple and economical device that is designed to cut PET bottles into sections of a given size for subsequent weight analysis.
SKU: HWC-100
Microx 4 trace portable oxygen meter
PreSens Microx 4 trace is a compact, fully self-contained fiber optic oxygen meter for non-contact and microinvasive O2 measurements. Compatible with PSt7 sensors (detection limit 15 ppb, 0 - 100% oxygen) and also with PSt8 trace oxygen sensors (detection limit 3 ppb, 0 - 10% oxygen).
SKU: Microx 4 trace
CanNeed BPT-4000 internal pressure tester for glass containers
The BPT-4000 internal pressure tester is an improved equipment for testing glass containers under the influence of internal pressure and for determining the pressure of rupture of containers.
SKU: BPT-4000