+998 (90) 174-57-84
Description Specifications Recommended products Accessories
Description
Description
Chloride, found in almost all natural waters, affects the taste of water at concentrations above 250 mg/l. High levels inhibit plant growth, and many manufacturing processes must limit chloride concentrations. This test kit is a multi-range kit (500 - 10,000 mg/L Cl- and 5,000 - 100,000 mg/L Cl-) supplied with deionized water to dilute the sample. The kit is enough to run 100 tests.
Recommendations for working with the CD-51
- Hold the pipette vertically over the sample. Do not let it touch the vial during titration.
- Rinse tubes and vials with sample prior to testing. After the test, rinse the tubes and bottles with deionized water.
- To record the test result as mg/L sodium chloride (NaCl), multiply the chloride result by 1.65.
Step-by-step determination of chloride in the range of 0 - 10,000 mg / l Cl-
- Fill the measuring tube with the sample.
- Transfer the sample to a mixing container.
- Add one pillow with Indicator (104399).
- Turn the mixing bottle left and right to mix.
- Add titrant (2349432) with silver nitrate drop by drop. Cap the bottle and shake vigorously after each drop. Count the drops until the color changes from yellow to reddish brown.
- If the precipitate is orange and the solution is yellow, repeat all steps with a new sample and shake the sample again.
- Multiply the total number of drops by 500 to get the result in mg/L.
Step-by-step determination of chloride in the range 0 - 100,000 mg / l Cl-
- Rinse the plastic pipette two or three times with sample water.
- Fill the pipette to the mark with the sample.
- Add the sample to the mixing bottle.
- Add deionized water to the mixing bottle until it is almost half full.
- Follow steps 3 - 6 from the previous instructions.
- Multiply the total number of drops by 5000 to get the result in mg/L.
Specifications
| Application area | Test kits, Drinking water, Laboratory analysis, Process control |
| Industry | Ecology, Food and Beverage, Municipal |
| Parameters | Chloride |
| Measurement Range | 500 - 10000 mg/L Cl- |
| Measurement method | drop count titration |
| Measurement Range (2) | 5000 - 100000 mg/L Cl- |
Recommended products
Test kit CN-21P for total chlorine determination
The CN-21P test kit is used to determine high concentrations of chlorine in water disinfection procedures.
SKU: 2444400
Compare
Total hardness test set, model HA-71A
The kit contains all the necessary reagents and accessories for determining the total hardness of water in a robust portable case for analysis in the laboratory and in the field.
SKU: 145201
Acidity Test Kit, Model AC-DT
Test kit, acidity; range 10 - 4,000 mg / L CaCO3.
SKU: 2064000
Test kit, chloride, model CD-DT
Test kit, chloride; range 10 - 8,000 mg/L Cl-.
SKU: 2063500
Chloride Test Kit, Model CDS-DT
Test kit, chloride; range 10 - 10,000 mg / L Cl-.
SKU: 2580600
Hardness (Total & Calcium) Test Kit, Model HAC-DT
Test kit, Hardness (Total & Calcium); range 10 - 4000 mg/L CaCO3.
SKU: 2063900
Test kit, alkalinity, model AL-DT
Test kit, alkalinity; range 10 - 4000 CaCO3 mg / L.
SKU: 2063700
Hypochlorite Test Kit, Model CN-HRDT
Test kit, hypochlorite; range 5 - 15% = 50 - 150 g / L Cl2.
SKU: 2687100
Sulfite Test Kit, Model SU-DT
Test kit, sulfite; range 4 - 800 mg / l SO32-.
SKU: 2063300
Test kit, hardness (total), model HA-DT
Test kit, hardness (total); range 10 - 4,000 CaCO3 mg / L.
SKU: 2063600
Test kit AC-6 for acidity determination
A set of reagents and necessary instruments for the determination of acidity (CaCO3) in a water sample by the method of drop count titration.
SKU: 222301
TEST KIT, 5-EP mg/L Hardness
Test kit, hardness; range 20 - 400 CaCO3 mg / L.
SKU: 145401
Hardness test kit (total / calcium), model HA-4P
Test kit for determination of total and calcium hardness by drop count titration / EDTA. Magnesium hardness can be calculated from the difference in the values obtained; range 20 - 400 mg/l CaCO3, 100 tests.
SKU: 145701
Alkalinity test kit, model AL-AP
A set of reagents and equipment for the analysis of alkalinity in water samples.
SKU: 2444301
Test kit 8-P for determination of chloride, 5 - 400 mg/l Cl-
Using a silver nitrate titrant, this kit provides fast and accurate determination of chlorides in a water sample.
SKU: 144001
Test kit CA-23, carbon dioxide
Set for the determination of carbon dioxide by drop count titration in the range of 1.25 - 25, 2 - 40 and 5 - 100 mg/L CO2.
SKU: 143601
Test kit, total chlorine, model CN-DT, 20 - 2000 mg/L
Test kit, total chlorine; range 20 - 2000 mg/L Cl2.
SKU: 2471100
Test set SU-5 for the determination of sulfite
The kit contains 100 tests that use drop titration / iodometric analysis to determine sulfite.
SKU: 148002
Test kit, carbon dioxide, model CA-DT
Test kit, carbon dioxide; range 10 - 1,000 mg/L CO2.
SKU: 2064100
Total Hardness Test Kit, Model 5-B
The drop titration method is used, which is simple and economical.
SKU: 145300
Accessories
Powder Pillows Chloride 2 Reagent for Chloride Test Kits
For the determination of chlorides by argentometric method (silver nitrate).
SKU: 104399
Silver nitrate solution 1.88 N; 100 ml
The solution is intended for the determination of chlorides in a water sample by drop count titration.
SKU: 2349432
Recommended products
TEST KIT, 5-EP mg/L Hardness
Test kit, hardness; range 20 - 400 CaCO3 mg / L.
SKU: 145401
Hardness test kit (total / calcium), model HA-4P
Test kit for determination of total and calcium hardness by drop count titration / EDTA. Magnesium hardness can be calculated from the difference in the values obtained; range 20 - 400 mg/l CaCO3, 100 tests.
SKU: 145701
Hardness (Total & Calcium) Test Kit, Model HAC-DT
Test kit, Hardness (Total & Calcium); range 10 - 4000 mg/L CaCO3.
SKU: 2063900
Test kit, alkalinity, model AL-DT
Test kit, alkalinity; range 10 - 4000 CaCO3 mg / L.
SKU: 2063700
Test set SU-5 for the determination of sulfite
The kit contains 100 tests that use drop titration / iodometric analysis to determine sulfite.
SKU: 148002
Hypochlorite Test Kit, Model CN-HRDT
Test kit, hypochlorite; range 5 - 15% = 50 - 150 g / L Cl2.
SKU: 2687100
Acidity Test Kit, Model AC-DT
Test kit, acidity; range 10 - 4,000 mg / L CaCO3.
SKU: 2064000
Test kit, hardness (total), model HA-DT
Test kit, hardness (total); range 10 - 4,000 CaCO3 mg / L.
SKU: 2063600
Total Hardness Test Kit, Model 5-B
The drop titration method is used, which is simple and economical.
SKU: 145300
