General laboratory equipment
Sorting:
Ultrapure and Pure Water System OmniaTap 6 | 12
OmniaTap 6 and 12 are laboratory water treatment systems for producing pure and ultrapure water in relatively small quantities (< 50 liters/day). The ability to provide water of two degrees of purity in one system is the result of a combination of cutting-edge technologies. Pure water is suitable for the preparation of: buffers, microbiological media, chemical and biochemical reagents.
SKU: 18200051, 18200101
OmniaTap UV laboratory pure and ultrapure water systems
OmniaTap UV water treatment systems are used to purify tap water to meet laboratory water standards. In addition to standard filter cartridges, water passes through a UV reactor, where it is disinfected using UV radiation.
SKU: 18200052, 18200102
Laboratory water purification systems OmniaTap UV/UF
Stakpure's OmniaTap UV/UF are designed to produce clean and ultrapure water for laboratory use. The model is equipped with a UV reactor and an ultrafiltration module to remove microorganisms and non-ionized compounds.
SKU: 18200053, 18200103
OmniaLab ED+ Water treatment system for laboratories, tank 100 liters
Stakpure's all-in-one water purification system for laboratory autoclaves and dishwashers. The tank holds 100 liters. Supply of pure water (type 2) and ultrapure water (type 1).
SKU: 18700020, 18700040, 18700070
OmniaLab ED laboratory water purification system (purity class 2)
OmniaLab ED is designed to provide a comprehensive laboratory supply of high quality type 2 clean water. Water supply for autoclaves, laboratory washers and ultrapure water systems.
SKU: 18700021, 18700041, 18700071
OmniaLab UP 20/40 Water purification system, type 2
OmniaLabUP is a laboratory water treatment system with a constant supply of high quality water. The OmniaLab UP is equipped with a 100 liter recirculating tank for storing Type II pure water.
SKU: 18600020, 18600040
Water purification system OmniaLabDS 20/40/60/80, water type 2 and CLRW (CLSI)
The OmniaLabDS water purification system produces Type 2 pure water up to 80 liters per hour. An aftertreatment cartridge and an optional emergency power supply make this system exceptionally reliable for feeding clinical analytical systems, as well as supplying water to steam sterilizers and washer-disinfectors.
SKU: 18800020, 18800040, 18800060, 18800080
Laboratory water purification system OmniaLabRO 20/40/60/80, type 3
Water purification by reverse osmosis. OmniaLabRO produces water of the third type, which is suitable for applications where the content of salts, silicates and suspended solids must be reduced. The main applications are buffer preparation, laboratory glassware washing/rinsing, general chemistry, hydroponics, supplying water to stainless steel autoclaves, steam generators, air humidifiers, sterilizers and Type 1 ultrapure water systems.
SKU: 18500020, 18500040, 18500060, 18500080
OmniaPure ultrapure water systems, type 1
If you need the highest quality pure water that meets the requirements of analytical and life science laboratories, one of the OmniaPure systems is for you. The built-in pre-cleaning system ensures reliable analysis results at all times and reduces operating costs. OmniaPure laboratory water purification systems can be customized to meet the needs of the laboratory, including continuous TOC control or UV disinfection.
SKU: 18200001
Disposable sampler for viscous samples SteriWare ViscoThief
ViscoThief single-use samplers from Sampling Systems eliminate the need for time-consuming cleaning after sampling. Fast sample viscous materials: honey, creams, pastes and thick oils. Ideal for use in the chemical, food and pharmaceutical industries for product quality control procedures.
SKU: 8055H, 8055P
Sampler for meat and cheese
The meat and cheese sampler takes a 25 mm round sample according to DIN EN ISO 17604:2015-12. Ideal for sampling various meats such as beef, chicken and lamb. It is also ideal for cheeses.
SKU: 6015A-150
Sampler for semi-solid materials
This sampler is designed for sampling semi-solid materials such as wax, paraffin, cheeses, oils, fats. Durable construction made of 316L stainless steel. Available in one fixed length - 230mm.
SKU: 7009A-01
MaxiCorer sampler for semi-solid materials
The MaxiCorer is suitable for sampling semi-solid materials such as cheese, wax, butter, etc., as well as for sampling cohesive (sticky) powders.
SKU: 7010A-01, 7010A-02
MiniCorer cheese and butter sampler
The Mini Corer from Sampling Systems is the perfect choice for sampling cheese, wax, butter, etc. It comes in 3 convenient lengths. Made from chemical resistant 316L stainless steel.
SKU: 7008A
Samplers for viscous samples
The hand sampler is suitable for sampling creams, shampoos, soaps, honey and similar semi-viscous materials. They are available in different lengths from 600 mm to 2000 mm and are made of different materials: PTFE, stainless steel or polypropylene.
SKU: 7000S, 7000P, 7000T
Sampler for ice and frozen food
Sampling tool for ice, frozen meat and soft paraffin.
SKU: 6005A-500, 6005A-1000
Sampler for ice and solid materials
Suitable for sampling solid materials such as frozen foods. The ice sampler is equipped with a sharp cutting edge that allows it to cut into the product and take a sample into the sampler.
SKU: 6000A
Ice sampler for drill
Sampling tool for difficult conditions. It is ideal for sampling wax, deep-frozen products and ice. The bit is compatible with most common commercial drills/screw drivers. It is available in 3 diameters from 10mm to 50mm.
SKU: 6011A, 6010A
Slot Sampler for Powder
Sampling Systems 1210A-B-K-J slot samplers are ideal for sampling high volume powder from any container. Featuring a rugged stainless steel construction, it is suitable for sampling powders, granules and even loosely cohesive powders. Sampling takes place simultaneously at several depth levels.
SKU: 1210A-B-K-J
Multilevel sampler for tablets and capsules
The sampler is suitable for sampling capsules and tablets at several levels. The ideal location for the sampler is in a container where freshly formed tablets or capsules fall as they are made.
SKU: 4000A-01, 4000A-02
Arium Pro water purification system (type 1) for laboratories
The laboratory water purification system is available in five versions with different modules. This series offers the widest range of features and options for individual configuration.
SKU: H2OBASIC-T
Distillation unit UDK 129
The UDK 129 is a basic but powerful system for a variety of tests, including the measurement of various types of nitrogen (e.g. ammonia and protein Kjeldahl or direct alkaline distillation), as well as the analysis of substances such as phenols, volatile fatty acids, cyanide and alcohol.
SKU: UDK 129
R4, R8, R12 - Laboratory Mash Bath
The mash bath is designed for use in laboratories of breweries and malt houses. It is designed to determine the extract content of malt using the CONGRESS, HARTONG (20, 45, 65, 80) and ASBC methods. Users can also carry out tests using their own algorithms using the programmable programs TERMOSTAT or PROFILE.
SKU: R4, R8, R12
Sorting:
Ultrapure and Pure Water System OmniaTap 6 | 12
OmniaTap 6 and 12 are laboratory water treatment systems for producing pure and ultrapure water in relatively small quantities (< 50 liters/day). The ability to provide water of two degrees of purity in one system is the result of a combination of cutting-edge technologies. Pure water is suitable for the preparation of: buffers, microbiological media, chemical and biochemical reagents.
SKU: 18200051, 18200101
OmniaTap UV laboratory pure and ultrapure water systems
OmniaTap UV water treatment systems are used to purify tap water to meet laboratory water standards. In addition to standard filter cartridges, water passes through a UV reactor, where it is disinfected using UV radiation.
SKU: 18200052, 18200102
Laboratory water purification systems OmniaTap UV/UF
Stakpure's OmniaTap UV/UF are designed to produce clean and ultrapure water for laboratory use. The model is equipped with a UV reactor and an ultrafiltration module to remove microorganisms and non-ionized compounds.
SKU: 18200053, 18200103
OmniaLab ED+ Water treatment system for laboratories, tank 100 liters
Stakpure's all-in-one water purification system for laboratory autoclaves and dishwashers. The tank holds 100 liters. Supply of pure water (type 2) and ultrapure water (type 1).
SKU: 18700020, 18700040, 18700070
OmniaLab ED laboratory water purification system (purity class 2)
OmniaLab ED is designed to provide a comprehensive laboratory supply of high quality type 2 clean water. Water supply for autoclaves, laboratory washers and ultrapure water systems.
SKU: 18700021, 18700041, 18700071
OmniaLab UP 20/40 Water purification system, type 2
OmniaLabUP is a laboratory water treatment system with a constant supply of high quality water. The OmniaLab UP is equipped with a 100 liter recirculating tank for storing Type II pure water.
SKU: 18600020, 18600040
Water purification system OmniaLabDS 20/40/60/80, water type 2 and CLRW (CLSI)
The OmniaLabDS water purification system produces Type 2 pure water up to 80 liters per hour. An aftertreatment cartridge and an optional emergency power supply make this system exceptionally reliable for feeding clinical analytical systems, as well as supplying water to steam sterilizers and washer-disinfectors.
SKU: 18800020, 18800040, 18800060, 18800080
Laboratory water purification system OmniaLabRO 20/40/60/80, type 3
Water purification by reverse osmosis. OmniaLabRO produces water of the third type, which is suitable for applications where the content of salts, silicates and suspended solids must be reduced. The main applications are buffer preparation, laboratory glassware washing/rinsing, general chemistry, hydroponics, supplying water to stainless steel autoclaves, steam generators, air humidifiers, sterilizers and Type 1 ultrapure water systems.
SKU: 18500020, 18500040, 18500060, 18500080
OmniaPure ultrapure water systems, type 1
If you need the highest quality pure water that meets the requirements of analytical and life science laboratories, one of the OmniaPure systems is for you. The built-in pre-cleaning system ensures reliable analysis results at all times and reduces operating costs. OmniaPure laboratory water purification systems can be customized to meet the needs of the laboratory, including continuous TOC control or UV disinfection.
SKU: 18200001
Disposable sampler for viscous samples SteriWare ViscoThief
ViscoThief single-use samplers from Sampling Systems eliminate the need for time-consuming cleaning after sampling. Fast sample viscous materials: honey, creams, pastes and thick oils. Ideal for use in the chemical, food and pharmaceutical industries for product quality control procedures.
SKU: 8055H, 8055P
Sampler for meat and cheese
The meat and cheese sampler takes a 25 mm round sample according to DIN EN ISO 17604:2015-12. Ideal for sampling various meats such as beef, chicken and lamb. It is also ideal for cheeses.
SKU: 6015A-150
Sampler for semi-solid materials
This sampler is designed for sampling semi-solid materials such as wax, paraffin, cheeses, oils, fats. Durable construction made of 316L stainless steel. Available in one fixed length - 230mm.
SKU: 7009A-01
MaxiCorer sampler for semi-solid materials
The MaxiCorer is suitable for sampling semi-solid materials such as cheese, wax, butter, etc., as well as for sampling cohesive (sticky) powders.
SKU: 7010A-01, 7010A-02
MiniCorer cheese and butter sampler
The Mini Corer from Sampling Systems is the perfect choice for sampling cheese, wax, butter, etc. It comes in 3 convenient lengths. Made from chemical resistant 316L stainless steel.
SKU: 7008A
Samplers for viscous samples
The hand sampler is suitable for sampling creams, shampoos, soaps, honey and similar semi-viscous materials. They are available in different lengths from 600 mm to 2000 mm and are made of different materials: PTFE, stainless steel or polypropylene.
SKU: 7000S, 7000P, 7000T
Sampler for ice and frozen food
Sampling tool for ice, frozen meat and soft paraffin.
SKU: 6005A-500, 6005A-1000
Sampler for ice and solid materials
Suitable for sampling solid materials such as frozen foods. The ice sampler is equipped with a sharp cutting edge that allows it to cut into the product and take a sample into the sampler.
SKU: 6000A
Ice sampler for drill
Sampling tool for difficult conditions. It is ideal for sampling wax, deep-frozen products and ice. The bit is compatible with most common commercial drills/screw drivers. It is available in 3 diameters from 10mm to 50mm.
SKU: 6011A, 6010A
Slot Sampler for Powder
Sampling Systems 1210A-B-K-J slot samplers are ideal for sampling high volume powder from any container. Featuring a rugged stainless steel construction, it is suitable for sampling powders, granules and even loosely cohesive powders. Sampling takes place simultaneously at several depth levels.
SKU: 1210A-B-K-J
Multilevel sampler for tablets and capsules
The sampler is suitable for sampling capsules and tablets at several levels. The ideal location for the sampler is in a container where freshly formed tablets or capsules fall as they are made.
SKU: 4000A-01, 4000A-02
Arium Pro water purification system (type 1) for laboratories
The laboratory water purification system is available in five versions with different modules. This series offers the widest range of features and options for individual configuration.
SKU: H2OBASIC-T
Distillation unit UDK 129
The UDK 129 is a basic but powerful system for a variety of tests, including the measurement of various types of nitrogen (e.g. ammonia and protein Kjeldahl or direct alkaline distillation), as well as the analysis of substances such as phenols, volatile fatty acids, cyanide and alcohol.
SKU: UDK 129
R4, R8, R12 - Laboratory Mash Bath
The mash bath is designed for use in laboratories of breweries and malt houses. It is designed to determine the extract content of malt using the CONGRESS, HARTONG (20, 45, 65, 80) and ASBC methods. Users can also carry out tests using their own algorithms using the programmable programs TERMOSTAT or PROFILE.
SKU: R4, R8, R12

