Probes and sensors
This section of the catalog presents a wide selection of Hach Lange Intellical probes and electrodes for the most demanding laboratory and field tasks in the following parameters: pH, dissolved oxygen, BOD, conductivity, TDS, ORP, ammonia, ammonium, chloride, fluoride, nitrate and sodium. All Intellical probes are automatically recognized by the HQ / HQD series meters and retain their calibration data, eliminating the need to recalibrate when switching between meters. The Red Rod pH electrodes provide exceptional performance and response times for a wide variety of sample types in the laboratory. The rugged outdoor sensors are housed in a stainless steel housing and, thanks to digital technology, can be used with cables up to 30 meters. In addition to sensors and electrodes, this section contains solutions for sensor maintenance, conductivity standards and pH buffers.
Sorting:
51350018 Technical buffer pH 4.01, 6 x 250 ml
pH buffer with a value of 4.01 for calibrating ph electrodes and ph meters.
SKU: 51350018
SKU: 1.99022.0001
Orbisphere GA2400 Series Oxygen Sensor, 100 Bar
Electrochemical industrial oxygen sensor. Used in conjunction with Orbisphere controllers.
SKU: GA2400-S0S
51350022 Technical buffer pH 9.21, 6 x 250 ml
pH buffer for calibrating electrodes and pH meters.
SKU: 51350022
HI7031L KCl solution with a standard conductivity of 1413 µS/cm
The HI7031L is a premium conductivity standard with a conductivity value of 1413 µS/cm, based on a NIST traceable potassium chloride solution.
SKU: HI7031L
51350010 Buffer pH 10.00, 250 ml
Technical buffer solution for calibration of ph meters and electrodes.
SKU: 51350010
Singlet Single-Use pH Buffer Kit, pH 4,01 & 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 4,01 & 7,00, 20 mL each.
SKU: 2769920
HI7007L buffer solution pH 7.01, volume 500 ml
pH 7.01 is the most widely used value of all buffer solutions.
SKU: HI7007L
Laboratory refillable pH electrode PHC301, cable length 1 m, 3 m
Intellical PHC301 is a refillable digital combination pH electrode with built-in temperature sensor. Laboratory design.
SKU: PHC30101, PHC30103
HI7010L buffer pH 10.01, volume 500 ml
A pH 10.01 buffer solution is commonly used to calibrate equipment used to analyze samples of water and other liquids.
SKU: HI7010L
Laboratory dissolved oxygen sensor LDO101, cable 1 m, 3 m
Intellical LDO101 - a digital luminescent / optical sensor of dissolved oxygen (LDO technology).
SKU: LDO10101, LDO10103
51343031 pH electrode InLab Versatile Pro
Combined pH electrode in plastic housing with built-in temperature sensor and fixed cable. It is intended for performance of the general laboratory tasks.
SKU: 51343031
Field dissolved oxygen sensor LDO101, cable 5, 10, 15, 30 m
Intellical LDO101 is a digital luminescent / optical dissolved oxygen sensor (LDO technology). Luminescence based LDO technology - no electrolyte change required, no interference due to deposits or hydrogen sulfide.
SKU: LDO10105, LDO10110
51343101 InLab Expert Pro combination pH electrode
Combination pH electrode with integrated temperature sensor, PEEK shaft and fixed cable. Designed for general use in laboratory and field conditions; durable and maintenance free.
SKU: 51343101
103635 WTW pH electrode SenTix 41 with temperature sensor
Standard electrode with gel electrolyte and built-in temperature sensor for measuring pH in the laboratory and in the field.
SKU: 103635
SKU: 114.000
1200-S sc Digital pH sensor for SC controller
Hach offers a wide range of analog and digital pH and ORP sensors to meet your in-line pH or ORP monitoring needs in water or other liquids.
SKU: LXV426.99.10001
Laboratory refillable pH electrode PHC281, cable length 1 m, 3 m
Intellical PHC281 is a digital combination pH electrode with built-in temperature sensor. The PHC281 is a refillable pH probe designed for challenging samples.
SKU: PHC28101, PHC28103
Laboratory Puncture pH Electrode Intellical PHC108
Intellical PHC108 is a digital combination pH puncture electrode with disposable color electrolyte (polymer) with ceramic diaphragm and built-in temperature sensor.
SKU: PHC10801
Buffer solution pH 4.01, 125 mL
Calibration solution with standard pH value for pH meters and electrodes.
SKU: LZW9460.99
Calibration solution for conductivity meter 147 μS/cm, KCl, 125 mL
Solution for calibrating the conductivity meter and checking the accuracy of the analysis.
SKU: LZW9701.99
Optical point SP-PSt3-NAU for oxygen sensor PreSens
The optical point is the most versatile version of the non-invasive optical oxygen sensors. SP-PSt3-NAU has a measuring range from 0 to 100% oxygen in dissolved or gas phase
SKU: SP-PSt3-NAU
1200-S sc digital online ORP sensor for SC series controllers
Hach offers a wide range of analog and digital pH and ORP sensors to meet your in-line pH or ORP monitoring needs in water or other liquids.
SKU: LXV426.99.20001
30111135 Buffer pH 11.00 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 30111135
Sorting:
51350018 Technical buffer pH 4.01, 6 x 250 ml
pH buffer with a value of 4.01 for calibrating ph electrodes and ph meters.
SKU: 51350018
SKU: 1.99022.0001
Orbisphere GA2400 Series Oxygen Sensor, 100 Bar
Electrochemical industrial oxygen sensor. Used in conjunction with Orbisphere controllers.
SKU: GA2400-S0S
51350022 Technical buffer pH 9.21, 6 x 250 ml
pH buffer for calibrating electrodes and pH meters.
SKU: 51350022
HI7031L KCl solution with a standard conductivity of 1413 µS/cm
The HI7031L is a premium conductivity standard with a conductivity value of 1413 µS/cm, based on a NIST traceable potassium chloride solution.
SKU: HI7031L
51350010 Buffer pH 10.00, 250 ml
Technical buffer solution for calibration of ph meters and electrodes.
SKU: 51350010
Singlet Single-Use pH Buffer Kit, pH 4,01 & 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 4,01 & 7,00, 20 mL each.
SKU: 2769920
HI7007L buffer solution pH 7.01, volume 500 ml
pH 7.01 is the most widely used value of all buffer solutions.
SKU: HI7007L
Laboratory refillable pH electrode PHC301, cable length 1 m, 3 m
Intellical PHC301 is a refillable digital combination pH electrode with built-in temperature sensor. Laboratory design.
SKU: PHC30101, PHC30103
HI7010L buffer pH 10.01, volume 500 ml
A pH 10.01 buffer solution is commonly used to calibrate equipment used to analyze samples of water and other liquids.
SKU: HI7010L
Laboratory dissolved oxygen sensor LDO101, cable 1 m, 3 m
Intellical LDO101 - a digital luminescent / optical sensor of dissolved oxygen (LDO technology).
SKU: LDO10101, LDO10103
51343031 pH electrode InLab Versatile Pro
Combined pH electrode in plastic housing with built-in temperature sensor and fixed cable. It is intended for performance of the general laboratory tasks.
SKU: 51343031
Field dissolved oxygen sensor LDO101, cable 5, 10, 15, 30 m
Intellical LDO101 is a digital luminescent / optical dissolved oxygen sensor (LDO technology). Luminescence based LDO technology - no electrolyte change required, no interference due to deposits or hydrogen sulfide.
SKU: LDO10105, LDO10110
51343101 InLab Expert Pro combination pH electrode
Combination pH electrode with integrated temperature sensor, PEEK shaft and fixed cable. Designed for general use in laboratory and field conditions; durable and maintenance free.
SKU: 51343101
103635 WTW pH electrode SenTix 41 with temperature sensor
Standard electrode with gel electrolyte and built-in temperature sensor for measuring pH in the laboratory and in the field.
SKU: 103635
SKU: 114.000
1200-S sc Digital pH sensor for SC controller
Hach offers a wide range of analog and digital pH and ORP sensors to meet your in-line pH or ORP monitoring needs in water or other liquids.
SKU: LXV426.99.10001
Laboratory refillable pH electrode PHC281, cable length 1 m, 3 m
Intellical PHC281 is a digital combination pH electrode with built-in temperature sensor. The PHC281 is a refillable pH probe designed for challenging samples.
SKU: PHC28101, PHC28103
Laboratory Puncture pH Electrode Intellical PHC108
Intellical PHC108 is a digital combination pH puncture electrode with disposable color electrolyte (polymer) with ceramic diaphragm and built-in temperature sensor.
SKU: PHC10801
Buffer solution pH 4.01, 125 mL
Calibration solution with standard pH value for pH meters and electrodes.
SKU: LZW9460.99
Calibration solution for conductivity meter 147 μS/cm, KCl, 125 mL
Solution for calibrating the conductivity meter and checking the accuracy of the analysis.
SKU: LZW9701.99
Optical point SP-PSt3-NAU for oxygen sensor PreSens
The optical point is the most versatile version of the non-invasive optical oxygen sensors. SP-PSt3-NAU has a measuring range from 0 to 100% oxygen in dissolved or gas phase
SKU: SP-PSt3-NAU
1200-S sc digital online ORP sensor for SC series controllers
Hach offers a wide range of analog and digital pH and ORP sensors to meet your in-line pH or ORP monitoring needs in water or other liquids.
SKU: LXV426.99.20001
30111135 Buffer pH 11.00 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 30111135