Probes and sensors
This section of the catalog presents a wide selection of Hach Lange Intellical probes and electrodes for the most demanding laboratory and field tasks in the following parameters: pH, dissolved oxygen, BOD, conductivity, TDS, ORP, ammonia, ammonium, chloride, fluoride, nitrate and sodium. All Intellical probes are automatically recognized by the HQ / HQD series meters and retain their calibration data, eliminating the need to recalibrate when switching between meters. The Red Rod pH electrodes provide exceptional performance and response times for a wide variety of sample types in the laboratory. The rugged outdoor sensors are housed in a stainless steel housing and, thanks to digital technology, can be used with cables up to 30 meters. In addition to sensors and electrodes, this section contains solutions for sensor maintenance, conductivity standards and pH buffers.
Sorting:
Replacement cap OEC30-PSt7-YAU with oxygen sensor for OXYPro WR and WRM probes
Thanks to the design of the cap, this model of the sensor reduces the formation of air bubbles during the measurement of dissolved oxygen.
SKU: OEC30-PSt7-YAU
SKU: AquaMaster
SKU: HD-480
ISE Ammonia Standard Solution, 1000 mg/L, 1 L
ISE Standard Solution. Ammonia, 1000 mg/L ±20 mg/L NH3-N. 1 L bottle.
SKU: 2354153
Filling Solution, Reference, Saturated KCl, 59 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), Saturated, 59 mL bottle.
SKU: 25118026
Ion Selective Electrode (ISE) Intellical ISENH3181, Ammonia (NH3) with calibration reagents
The Intellical ISE Kit for Ammonia analysis contains everything you need to measure ammonia (NH3) concentration with the HQD series meters.
SKU: ISENH3181AP
ORP calibration solution in ampoules (Light's solution)
Light's solution in ampoules for calibration of ORP meters. The package contains 20 ampoules of 20 ml.
SKU: 2612520
Certified Buffer Standard Solution, pH 1.679
Certified Buffer Standard Solution,1.679 ±0.010 pH at 25°C.
SKU: S11M001
Buffer solution pH 10.01, 125 ml
Calibration solution with pH 10.01 ± 0.02 at 25 ° C for ph electrodes.
SKU: LZW9470.99
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
LDO sc process dissolved oxygen sensor; cable 10 meters
LDO Process Dissolved Oxygen Sensor for SC Series Online Controllers. Available with 10 meter cable.
SKU: LXV416.99.20001
SKU: ACF60
SKU: HD-960L
Ionic Strength Adjustor Sodium / Potassium (ISA), 100 pieces
Ionic Strength Regulator for Hach Ion Selective Electrodes.
SKU: 4451569
Filling Solution, Reference, 3 M KCl, 50 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), 3 M, 50 mL bottle.
SKU: 2756559
Ion Selective Electrode (ISE) Intellical ISENH4181, ammonium (NH4 +); cable 1, 3 m
The Intellical ISENH4181 is a digital Ion Selective Electrode (ISE) with Dritek disposable gel, a porous Teflon annular diaphragm and an integrated temperature sensor.
SKU: ISENH418101, ISENH418103
ORP / Redox calibration solution (ZoBell's solution)
Standard solution for calibration and accuracy verification of ORP electrodes.
SKU: 2316949
Buffer Solution, pH 10,01
Buffer Solution, concentration pH 10,01 ± 0,02, 500 mL.
SKU: 1222149
Calibration solution ph 4.01, 250 mL
Buffer solution with a standard pH value for calibrating and verifying the accuracy of pH electrodes and hydrogen ion meters.
SKU: LZW9463.99
Solution 12.88 mS/cm, KCl, 250 mL for conductivity meter calibration
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 250 ml.
SKU: LZW9720.99
SKU: ACS60
SKU: 6122
ISE standard sodium solution (Na +) concentration 1000 mg/l; volume 500 ml
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1474949
Filling Solution, Reference, 2,44 M KCl, 59 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), 2,44 M, 59 mL bottle.
SKU: 2965026
Sorting:
Replacement cap OEC30-PSt7-YAU with oxygen sensor for OXYPro WR and WRM probes
Thanks to the design of the cap, this model of the sensor reduces the formation of air bubbles during the measurement of dissolved oxygen.
SKU: OEC30-PSt7-YAU
SKU: AquaMaster
SKU: HD-480
ISE Ammonia Standard Solution, 1000 mg/L, 1 L
ISE Standard Solution. Ammonia, 1000 mg/L ±20 mg/L NH3-N. 1 L bottle.
SKU: 2354153
Filling Solution, Reference, Saturated KCl, 59 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), Saturated, 59 mL bottle.
SKU: 25118026
Ion Selective Electrode (ISE) Intellical ISENH3181, Ammonia (NH3) with calibration reagents
The Intellical ISE Kit for Ammonia analysis contains everything you need to measure ammonia (NH3) concentration with the HQD series meters.
SKU: ISENH3181AP
ORP calibration solution in ampoules (Light's solution)
Light's solution in ampoules for calibration of ORP meters. The package contains 20 ampoules of 20 ml.
SKU: 2612520
Certified Buffer Standard Solution, pH 1.679
Certified Buffer Standard Solution,1.679 ±0.010 pH at 25°C.
SKU: S11M001
Buffer solution pH 10.01, 125 ml
Calibration solution with pH 10.01 ± 0.02 at 25 ° C for ph electrodes.
SKU: LZW9470.99
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
LDO sc process dissolved oxygen sensor; cable 10 meters
LDO Process Dissolved Oxygen Sensor for SC Series Online Controllers. Available with 10 meter cable.
SKU: LXV416.99.20001
SKU: ACF60
SKU: HD-960L
Ionic Strength Adjustor Sodium / Potassium (ISA), 100 pieces
Ionic Strength Regulator for Hach Ion Selective Electrodes.
SKU: 4451569
Filling Solution, Reference, 3 M KCl, 50 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), 3 M, 50 mL bottle.
SKU: 2756559
Ion Selective Electrode (ISE) Intellical ISENH4181, ammonium (NH4 +); cable 1, 3 m
The Intellical ISENH4181 is a digital Ion Selective Electrode (ISE) with Dritek disposable gel, a porous Teflon annular diaphragm and an integrated temperature sensor.
SKU: ISENH418101, ISENH418103
ORP / Redox calibration solution (ZoBell's solution)
Standard solution for calibration and accuracy verification of ORP electrodes.
SKU: 2316949
Buffer Solution, pH 10,01
Buffer Solution, concentration pH 10,01 ± 0,02, 500 mL.
SKU: 1222149
Calibration solution ph 4.01, 250 mL
Buffer solution with a standard pH value for calibrating and verifying the accuracy of pH electrodes and hydrogen ion meters.
SKU: LZW9463.99
Solution 12.88 mS/cm, KCl, 250 mL for conductivity meter calibration
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 250 ml.
SKU: LZW9720.99
SKU: ACS60
SKU: 6122
ISE standard sodium solution (Na +) concentration 1000 mg/l; volume 500 ml
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1474949
Filling Solution, Reference, 2,44 M KCl, 59 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), 2,44 M, 59 mL bottle.
SKU: 2965026

