Meters and probes pH Oxygen Conductivity Portable labs Spectrophotometry Turbidimetry Colorimetry Titration Process equipment Online analyzers Refractometers and densitometers Reagents and standards HACH Laboratory equipment Process filtration Quality control of packaging Microbiology Accessories

Incubator Witeg SWIG 32 / 50 / 105 / 155

witeg-swig-inkubator.jpglaboratory incubator heating chamberIncubator software

SKU: DH.SWIG03032

Manufacturer: Witeg

Availability: Order only

Order Add to comparison

The Witeg SWIG 32/50/105/155 liter incubator is ideal for a variety of applications.

Advantages:

  • gravitational-air flow of air, preventing cross-contamination of samples
  • uniformity and temperature accuracy thanks to the high-performance 3-sided heating mechanism
  • corrosion-resistant stainless steel chamber
  • the internal door from the tempered glass with a silicone lining provides convenient inspection
  • function of saving of the set values of temperature and the timer
  • alert function: error status and timer end

Description

Description

The 32/50/105/155 liter Witeg SWIG is ideal for a variety of applications: microorganism culture, animal and plant cell culture, germination and so on.

The SWIG intelligent incubator is equipped with a high-performance heating mechanism, which is optimized for the chamber capacity, the power of the heating element and the type of air circulation, respectively.

The temperature displayed on the controller corresponds exactly to the actual temperature in the very center of the chamber or the average temperature over the entire area of the chamber, which is maintained exactly within the oscillation specification. In addition, the temperature over the entire area of the chamber shows a very high stability, which is within very small deviations with respect to temperature uniformity.

The recently developed high-performance heating mechanism has made it possible to achieve a high degree of accuracy and uniformity of the temperature in the chamber. This is achieved by means of heating elements installed on three sides, ie in the left, right and lower parts of the chamber, which directly heat the stainless steel chamber. This increases the thermal conductivity of the material to a maximum.

The key features are as follows:

  • Different applications: culture of microorganisms, cell culture of animals and plants, germination, constant temperature, etc.
  • Uniformity and accuracy of temperature thanks to the high-performance mechanism of heating: 3-sided heating.
  • Ergonomic design 4-inch TFT LCD screen with full touch screen (Smart-Lab controller ().
  • WiRe application and web service ™.
  • Automatic data recording.
  • Self-diagnostic function.
  • Connect to the Internet via Wi-Fi.
  • Configure a program variable for multiple patterns with multiple segments.
  • Recorded data can be transferred to a PC from a USB drive.
  • New compact housing design.
  • The controller software can be updated via the USB port.

Technical characteristics of the Witeg incubator

  SWIG-32  SWIG-50  SWIG-105  SWIG-115
Volume, l

32  50  150   155 
Temperature range and resolution control 5°C - 70°C, ±0.1°C
Temperature fluctuation
and sensor,
at 37 ° C / at 50 ° C
± 0,2 °C/± 0,3 °C, sensor PT 100
Temperature changes,
at 37 ° C / at 50 ° C
± 0,6 ° C, ± 1,0 °C
Heater power 150 W 200 W  300 W 400 W
Heating time  from 25 minutes to 37 ° C, from 40 minutes to 50 ° C 
Temperature recovery time
(door open 30 seconds)
8 minutes to 37 °C,
12 minutes to 50 °C
8 minutes to 37 °C,
12 minutes to 50 °C
10 minutes to 37 °C,
15 minutes to 50 °C
10 minutes to 37 °C,
15 minutes to 50 °C
Timer  99 h 59 min
Shelves included 2 shelves made of polyethylene coated steel wire, total load 32 kg (16 kg per shelf)
Internal dimensions
(W x D x H)
312 x 290 x 360 mm 370 x 350 x 420 mm 485 x 410 x 535 mm 550 x 475 x 600 mm

External dimensions
(W x D x H)
and net weight

458 x 477 x 624 mm,
32 kg
518 x 537 x 701 mm,
40 kg
635 х 595 х 841 mm,
59 kg
700 x 660 x 906 mm,
71 kg
Package size and
gross weight

568 x 592 x 698 mm,
39 kg

628 x 652 x 775 mm,
53 kg
731 x 710 x 1018 mm,
67 kg
796 x 775 x 1083 mm,
78 kg
Power supply  1 phase 120 VAC, 60 Hz or 230 VAC, 50/60 Hz
Power consumption 159 W 169,9 W  292,9 W  420,5 W
Power usage 37 °C/50 °C    34 W / 81 W 41 W/ 103 W 63 W/ 152 W 99 W/ 212 W
Order number 230V DH.SWIG03032  DH.SWIG03050  DH.SWIG03105   DH.SWIG03155
Order number 120V    DH.SWIG04032  DH.SWIG04050 DH.SWIG04105  DH.SWIG04155 
Specifications

Specifications

Application areaPharmaceuticals, Medicine
TypeLaboratory
IndustryPharmaceutical, Chemical
Recommended products

Recommended products

LT20 BOD5 thermostat

LT20 BOD5 thermostat

Thermoreactor with heating block with 27 holes for sample cuvettes.

SKU: LTV073

View product Compare

Incubator Binder BD 56

Incubator Binder BD 56

The Binder BD 56 incubator is specially designed for the gentle incubation of organisms and for the conditioning of temperature-sensitive environments. The new design of the unit and the uniform temperature distribution ensure the best results.

SKU: 9010-0323

View product Compare

BOD TRAK II Manometric BOD Apparatus

BOD TRAK II Manometric BOD Apparatus

Simplify BOD analysis with BODTrak II. Results comparable to the dilution method are achieved in just two to three days. Use these results for process control or as an adjunct to a dilution method. Laboratory measuring station, control unit and stirrer with pressure transducers for 6 bottles. Measurement range 0 - 700 mg/L O2.

SKU: 2952400

View product Compare

Incubator Memmert IF110

Incubator Memmert IF110

The IF110 incubator is intended for use in medicine, pharmaceuticals and food technology. The heating and control of this incubator has been optimized especially for low temperatures down to + 80 ° C.

SKU: 102606214

View product Compare

Recommended products