Incubator Memmert IF110

SKU: 102606214
Manufacturer: Memmert
Availability: Order only
The IF110 incubator is intended for use in medicine, pharmaceuticals and food technology. The heating and control of this incubator has been optimized especially for low temperatures down to + 80 ° C. To avoid overheating, the temperature rises in a very narrow range and is kept exactly at the set level.
Benefits:
- With large area all-round heating
- Pre-heating of the fresh air
- With interior glass door
Description Specifications Recommended products
Description
Description
The heating of this incubator is optimally adjusted for forced air circulation; If necessary, the fan can be completely turned off, and valuable chamber weights for research in pharmaceuticals, medicine and food chemistry are very thoroughly warmed up.
The SetpointWAIT function is installed, thanks to which the incubator does not start until the set temperature is reached. The ability to calibrate three temperatures (optional). Adjustable parameters: temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, summer / winter time.
Ventilation features:
- Air circulation by fan with a quiet turbine, adjustable in 10% steps
- Mixing of pre-heated fresh air through an air damper (electronically controlled)
- Ventilation connection with restrictive flap
Built-in self-diagnostic system for analysis of faults, adjustable electronic overheating sensor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 for switching off heating approx. 20 ° C above the rated temperature.
The incubator is made of stainless steel with dimensions WxHxD: 745x864x584 mm (+ 56 mm door handle). The back of the body is made of galvanized steel. Easy-care stainless steel interior, reinforced with deep grooves, with built-in and protected large area heater on four sides.
In case of power outages, pragmatic documentation is retained. Programming the AtmoCONTROL software for reading, controlling and organizing the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software is available as an accessory (on request).
Technical data Memmert incubator
Setting temperature range | +20 to +80 °C |
Setting accuracy temperature | 0,1 °C |
Temperature sensor | 1 Pt100 sensor DIN class A in 4-wire-circuit |
Timer | Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
Volume | 108 l |
Max. loading of chamber | 175 kg |
Voltage | 230 V, 50/60 Hz |
Electrical load | approx. 1400 W |
Voltage | 115 V, 50/60 Hz |
Electrical load | approx. 900 W |
Specifications
Application area | Pharmaceuticals, Food production, Dairy industry, Medicine |
Type | Laboratory |
Industry | Pharmaceutical, Chemical |
Operating temperature range | 10 - 80 °C |
Recommended products
Incubator Binder BD 56
The Binder BD 56 incubator is specially designed for the gentle incubation of organisms and for the conditioning of temperature-sensitive environments. The new design of the unit and the uniform temperature distribution ensure the best results.
SKU: 9010-0323
LT20 BOD5 thermostat
Thermoreactor with heating block with 27 holes for sample cuvettes.
SKU: LTV073
Incubator Witeg SWIG 32 / 50 / 105 / 155
The intelligent Witeg SWIG incubator for 32/50/105/155 liters is ideally suited for various areas of applications: culture of microorganisms, culture of cells of animals and plants, germination and so on.
SKU: DH.SWIG03032
BOD TRAK II Manometric BOD Apparatus
Simplify BOD analysis with BODTrak II. Results comparable to the dilution method are achieved in just two to three days. Use these results for process control or as an adjunct to a dilution method. Laboratory measuring station, control unit and stirrer with pressure transducers for 6 bottles. Measurement range 0 - 700 mg/L O2.
SKU: 2952400
Recommended products
Incubator Binder BD 56
The Binder BD 56 incubator is specially designed for the gentle incubation of organisms and for the conditioning of temperature-sensitive environments. The new design of the unit and the uniform temperature distribution ensure the best results.
SKU: 9010-0323
BOD TRAK II Manometric BOD Apparatus
Simplify BOD analysis with BODTrak II. Results comparable to the dilution method are achieved in just two to three days. Use these results for process control or as an adjunct to a dilution method. Laboratory measuring station, control unit and stirrer with pressure transducers for 6 bottles. Measurement range 0 - 700 mg/L O2.
SKU: 2952400
Incubator Witeg SWIG 32 / 50 / 105 / 155
The intelligent Witeg SWIG incubator for 32/50/105/155 liters is ideally suited for various areas of applications: culture of microorganisms, culture of cells of animals and plants, germination and so on.
SKU: DH.SWIG03032
LT20 BOD5 thermostat
Thermoreactor with heating block with 27 holes for sample cuvettes.
SKU: LTV073