998 (90) 174-57-84
Free chlorine
Total chlorine
Filters
Sorting:
EZ1006 / EZ1007 Free and Total Chlorine Analyzers
The EZ Series online analyzers offer several options for monitoring chlorine in water. Typical applications are drinking water, surface water, process water. The EZ1000 Series analyzers use colorimetric method to measure chlorine. EZ1006 Chlorine free. EZ1007 Chlorine, total. Standard measuring range: 0.025 - 1.5 mg / l Cl2.
SKU: EZ1006.99001C02, EZ1007.99001C02
Compare
SC4500 digital controller
The SC4500 is a dual channel controller for digital analytical devices (such as sensors and analyzers). The controller shows sensor measurements and other data on the display, can transmit analog and digital signals, and can also interact with other devices and control them through outputs and relays.
SKU: LXV525.99C11551
CL17 sc Photometric Chlorine Analyzer
The Hach CL17 sc analyzer is used for continuous monitoring and determination of the concentration of free or total residual chlorine in water. Readings are not affected by changes in chlorine concentration, sample pH, temperature, flow rate, or pressure. The CL17 sc is also suitable for measuring residual permanganate content. Research demonstrates the analyzer's analytical capabilities and confirms that it is a reliable solution and a good tool for managing complex water purification and disinfection processes.
SKU: 8574500, 8574400
CL17sc Colorimetric Chlorine Analyzer, Ultra Low Range 0.008 - 5.0 mg/L Cl2
The CL17sc analyzer is best suited for pure water, which measures either the presence of chlorine in small quantities or its absence. It measures the total chlorine concentration from 0.008 to 5.0 mg/l. If your processes include reverse osmosis membranes or any form of dechlorination such as chemical (eg sulfite/bisulfite) and/or adsorptive (eg activated carbon), then the ultra-low detection range CL17sc can be used to monitor the presence of chlorine at very low levels or its complete absence, depending on the needs of your process and equipment.
SKU: 9790400, 9790500
Amperometric sensors for total and free chlorine CLT10 sc and CLF10 sc
The amperometric sensors CLT10 sc and CLF10 sc complement real-time chemical analysis solutions for free and total chlorine in the laboratory and industry. Amperometric sensors continuously monitor the chlorine concentration without the use of reagents. Measurement range 0 - 20 ppm Cl2.
SKU: LXV45A.98.23022, LXV45B.98.23022
Sorting:
EZ1006 / EZ1007 Free and Total Chlorine Analyzers
The EZ Series online analyzers offer several options for monitoring chlorine in water. Typical applications are drinking water, surface water, process water. The EZ1000 Series analyzers use colorimetric method to measure chlorine. EZ1006 Chlorine free. EZ1007 Chlorine, total. Standard measuring range: 0.025 - 1.5 mg / l Cl2.
SKU: EZ1006.99001C02, EZ1007.99001C02
SC4500 digital controller
The SC4500 is a dual channel controller for digital analytical devices (such as sensors and analyzers). The controller shows sensor measurements and other data on the display, can transmit analog and digital signals, and can also interact with other devices and control them through outputs and relays.
SKU: LXV525.99C11551
CL17 sc Photometric Chlorine Analyzer
The Hach CL17 sc analyzer is used for continuous monitoring and determination of the concentration of free or total residual chlorine in water. Readings are not affected by changes in chlorine concentration, sample pH, temperature, flow rate, or pressure. The CL17 sc is also suitable for measuring residual permanganate content. Research demonstrates the analyzer's analytical capabilities and confirms that it is a reliable solution and a good tool for managing complex water purification and disinfection processes.
SKU: 8574500, 8574400
CL17sc Colorimetric Chlorine Analyzer, Ultra Low Range 0.008 - 5.0 mg/L Cl2
The CL17sc analyzer is best suited for pure water, which measures either the presence of chlorine in small quantities or its absence. It measures the total chlorine concentration from 0.008 to 5.0 mg/l. If your processes include reverse osmosis membranes or any form of dechlorination such as chemical (eg sulfite/bisulfite) and/or adsorptive (eg activated carbon), then the ultra-low detection range CL17sc can be used to monitor the presence of chlorine at very low levels or its complete absence, depending on the needs of your process and equipment.
SKU: 9790400, 9790500
Amperometric sensors for total and free chlorine CLT10 sc and CLF10 sc
The amperometric sensors CLT10 sc and CLF10 sc complement real-time chemical analysis solutions for free and total chlorine in the laboratory and industry. Amperometric sensors continuously monitor the chlorine concentration without the use of reagents. Measurement range 0 - 20 ppm Cl2.
SKU: LXV45A.98.23022, LXV45B.98.23022