A critical element of disinfection is accurate dosing and monitoring of the ClO2 level in the water. Adding chlorine dioxide in the right concentration saves material, protects the environment and the health of the end user of your product. Continuously monitor the chlorine dioxide level in the water with the Hach Lange 9187 sc analyzer.
Products
Dual input meter HQ40D with dissolved oxygen probe LDO101 + conductivity cell CDC401
Portable two-channel multi-parameter device HQ40D for measuring pH, ORP, conductivity, TDS, resistivity, salinity, dissolved oxygen and BOD complete with laboratory sensor for dissolved oxygen LDO101 and conductivity sensor CDC401, cable length 1 m.
SKU: HQ40D.99.201301
DR6000 UV VIS Spectrophotometer without RFID
The DR6000 is the most advanced laboratory spectrophotometer in the industry. It offers high-speed UV and Visible wavelength scanning and comes with over 250 pre-programmed methods that include the most common testing methods used in water analysis.
SKU: LPV441.99.00001
HQ30D Digital multi meter kit, with Dissolved Oxygen Sensor LDO101
The HQ30D is a handheld, single-channel meter for measuring pH, ORP, conductivity, TDS, resistivity, salinity and dissolved oxygen. This kit - HQ30D device + LDO101 dissolved oxygen sensor, cable length 1 m; 3m; 5 m; 10 m; 15 m; 30m.
SKU: HQ30D.99.301000
HQ30D Portable Single Input Multi-Parameter Meter with pH Electrode PHC201
The HQ30D is a handheld, single-channel meter for measuring pH, ORP, conductivity, TDS, resistivity, salinity and dissolved oxygen. This set - HQ30D device + pH electrode PHC201, cable length 1 m; 3m.
SKU: HQ30D.99.121000
LCK342 Nitrite cuvette test, 0,6 - 6,0 mg/L NO2-N
A set of reagents for the determination of nitrites, measuring range 0,6 - 6,0 mg/L NO2-N / 2 - 20 mg/L NО2.
SKU: LCK342
HQ30D Portable Single Channel Multi-Parameter Meter
Portable single-channel multi-parameter instrument for measuring pH, ORP, conductivity, TDS, resistivity, salinity, dissolved oxygen and BOD. Basic device without electrodes.
SKU: HQ30D.99.000000
LCK327 Water Hardness cuvette test 1-20° dH
Test kit for determining water hardness, measuring range 1-20 ° dH; 5 - 100 mg / l Ca; 3 - 50 mg / l Mg.
SKU: LCK327
LCK303 Ammonium cuvette test, 2,0 - 47,0 mg/L NH4-N
Reagent kit LCK303 for the determination of Ammonium, measuring range: 2,0 - 47,0 mg/L NH4-N / 2,5 - 60 mg/L NH4.
SKU: LCK303
LCK304 Ammonium cuvette test, 0,015 - 2,0 mg/L NH4-N
Reagent kit LCK304 for the determination of Ammonium, measuring range 0,015 - 2,0 mg/L NH4-N / 0,02 - 2,5 mg/L NH4.
SKU: LCK304
LCK049 Orthophosphate cuvette test 1,6 - 30 mg/L PO4-P
A set of reagents for the determination of orthophosphate, measuring range: 1,6 - 30 mg /L PO4-P / 5 - 90 mg/L PO4.
SKU: LCK049
Orbisphere stainless steel oxygen sensor, 50 bar
Electrochemical sensor for in-line O2 monitoring.
SKU: 31120.01
LCK349 Phosphate (Ortho/Total) cuvette test 0,05 - 1,5 mg/L PO4-P
Phosphate reagent kit (Ortho/Total), measuring range 0,05 - 1,5 mg/L PO4-P / 0,15 - 4,5 mg/L PO4.
SKU: LCK349
LCK241 Bitter units (MEBAK) cuvette test, ≥ 2 BU
LCK241 cuvette test (MEBAK) for the determination of bitter units, measurement range ≥ 2 BU.
SKU: LCK241
LCK329 Copper cuvette test 0,1 - 8,0 mg/L Cu
A set of reagents for the determination of Сopper, measuring range 0,1 - 8,0 mg / L Cu.
SKU: LCK329
TL2310 LED Turbidimeter, ISO, 0 - 1000 NTU
The new TL23 Series laboratory turbidity meters combine proven technology and advanced features to simplify industrial and wastewater analysis. Model TL2310 ISO. Light source: light-emitting diode (LED). Measurement method: nephelometric. Measurement range: 0 - 1000 NTU.
SKU: LPV444.99.00120
LCK529 Copper trace cuvette test, 0,01 - 1,0 mg/L Cu
A set of reagents for the determination of Сopper traces, measuring range 0,01 - 1,0 mg/L Cu.
SKU: LCK529
Laboratory refillable pH electrode PHC301, cable length 1 m, 3 m
Intellical PHC301 is a refillable digital combination pH electrode with built-in temperature sensor. Laboratory design.
SKU: PHC30101, PHC30103
Laboratory dissolved oxygen sensor LDO101, cable 1 m, 3 m
Intellical LDO101 - a digital luminescent / optical sensor of dissolved oxygen (LDO technology).
SKU: LDO10101, LDO10103
Field dissolved oxygen sensor LDO101, cable 5, 10, 15, 30 m
Intellical LDO101 is a digital luminescent / optical dissolved oxygen sensor (LDO technology). Luminescence based LDO technology - no electrolyte change required, no interference due to deposits or hydrogen sulfide.
SKU: LDO10105, LDO10110
HQ40D Portable Dual Input Multi-Parameter Meter
Portable two-channel multi-parameter instrument for measuring pH, ORP, conductivity, TDS, resistivity, salinity, dissolved oxygen and BOD. Basic device without electrodes.
SKU: HQ40D.99.000000
HQ30D Portable Single Input Multi-Parameter Meter with pH Electrode PHC101
The HQ30D is a handheld, single-channel meter for measuring pH, ORP, conductivity, TDS, resistivity, salinity and dissolved oxygen. This set - HQ30D device + pH electrode PHC101, cable length 1 m; 3m; 5 m; 10 m.
SKU: HQ30D.99.101000
Optical point for M1100 and K1100 dissolved oxygen sensors
Replacement ortical spot for Orbisphere dissolved oxygen sensors.
SKU: M1100-L, M1100-H
HQ30D Portable Single Input Multi-Parameter Meter with pH Electrode PHC301
The HQ30D is a handheld, single-channel meter for measuring pH, ORP, conductivity, TDS, resistivity, salinity and dissolved oxygen. This set - HQ30D instrument + PHC301 refillable pH electrode, cable length 1 m; 3m.
SKU: HQ30D.99.151000
LCK311 Chloride cuvette test 1-70 mg/L / 70-1000 mg/L Cl
LCK311 Chloride cuvette test, measuring range 1 - 70 mg/L / 70 - 1000 mg/L Cl.
SKU: LCK311