A critical element of disinfection is accurate dosing and monitoring of the ClO2 level in the water. Adding chlorine dioxide in the right concentration saves material, protects the environment and the health of the end user of your product. Continuously monitor the chlorine dioxide level in the water with the Hach Lange 9187 sc analyzer.
Dissolved Oxygen in Beer
The control of oxygen at all stages is an important and integral part of the beer production process. AquaAnalytics specialists have many years of experience working with breweries of various sizes, which allows them to detect even hidden defects and find solutions to the most complex problems.
DR6000 UV VIS Spectrophotometer without RFID
The DR6000 is the most advanced laboratory spectrophotometer in the industry. It offers high-speed UV and Visible wavelength scanning and comes with over 250 pre-programmed methods that include the most common testing methods used in water analysis.
Reinforced silicone hose for the pharmaceutical industry, type SIL-W
The industrial silicone hose Marsoflex SIL-W is reinforced with multi-layer textile reinforcement and stainless-steel wire spiral. Does not transfer smell and taste to transported substances. Suitable for use in the pharmaceutical and food industries.
SKU: SILW12.7X5.9 - SILW50.8X6.1
Portable three-channel meter HQ4300 with field probes of pH, conductivity and dissolved oxygen
Portable three - channels meter Hach with a pH electrode in the measuring range 2 - 14 pH with a conductivity probe in the measuring range 0.0 μS/cm - 200 μS/cm and with a dissolved oxygen sensor in the measuring range 0.05 - 20.0 mg/L.
LT200 / DRB200 Dry thermostat with 2 blocks, 6x13 mm and 4x20 mm per block
LT200 is a digital thermoreactor with2 separately controllable heating blocks with separate protection covers, both blocks each with 6x13mm and 4x20mm holes. The thermostat meets the requirements for fast and high-quality decomposition in municipal, industrial and service laboratories.
OmniaTap UV laboratory pure and ultrapure water systems
OmniaTap UV water treatment systems are used to purify tap water to meet laboratory water standards. In addition to standard filter cartridges, water passes through a UV reactor, where it is disinfected using UV radiation.
SKU: 18200052, 18200102
Laboratory water purification systems OmniaTap UV/UF
Stakpure's OmniaTap UV/UF are designed to produce clean and ultrapure water for laboratory use. The model is equipped with a UV reactor and an ultrafiltration module to remove microorganisms and non-ionized compounds.
SKU: 18200053, 18200103
Portable three - channels meter HQ4300 with laboratory probes of pH, conductivity and dissolved oxygen
Portable three - channels meter Hach with a pH electrode in the measuring range 0 - 14 pH with a conductivity probe in the measuring range 0.0 μS/cm - 200 μS/cm and with a dissolved oxygen sensor in the measuring range 0.05 - 20.0 mg/L.
Ultrapure and Pure Water System OmniaTap 6 | 12
OmniaTap 6 and 12 are laboratory water treatment systems for producing pure and ultrapure water in relatively small quantities (< 50 liters/day). The ability to provide water of two degrees of purity in one system is the result of a combination of cutting-edge technologies. Pure water is suitable for the preparation of: buffers, microbiological media, chemical and biochemical reagents.
SKU: 18200051, 18200101
CL17 sc Photometric Chlorine Analyzer
The Hach CL17 sc analyzer is used for continuous monitoring and determination of the concentration of free or total residual chlorine in water. Readings are not affected by changes in chlorine concentration, sample pH, temperature, flow rate, or pressure. The CL17 sc is also suitable for measuring residual permanganate content. Research demonstrates the analyzer's analytical capabilities and confirms that it is a reliable solution and a good tool for managing complex water purification and disinfection processes.
SKU: 8574500, 8574400