Laboratory and industrial analysis of COD of effluents of any industry
Hach has developed a range of complete solutions adapted for laboratories and factories performing COD tests. Coordinated instrumentation and reagent systems enable you to run your analysis safer, faster, and with confidence in your results.
The DR6000 is the most advanced laboratory spectrophotometer in the industry. It offers high-speed UV and Visible wavelength scanning and comes with over 250 pre-programmed methods that include the most common testing methods used in water analysis.
Laboratory refillable pH electrode PHC281, cable length 1 m, 3 m
Intellical PHC281 is a digital combination pH electrode with built-in temperature sensor. The PHC281 is a refillable pH probe designed for challenging samples.
Glass water stills for double distillation Lauda Puridest
Lauda laboratory water stills for double distillation of Puridest series are used to obtain sterile and pyrogen-free distillate with a conductivity of 1.6 μS/cm, without cartridges and adsorbents.
OmniaTap UV laboratory pure and ultrapure water systems
OmniaTap UV water treatment systems are used to purify tap water to meet laboratory water standards. In addition to standard filter cartridges, water passes through a UV reactor, where it is disinfected using UV radiation.
Laboratory water purification systems OmniaTap UV/UF
Stakpure's OmniaTap UV/UF are designed to produce clean and ultrapure water for laboratory use. The model is equipped with a UV reactor and an ultrafiltration module to remove microorganisms and non-ionized compounds.
Laboratory water stills from Lauda of Puridest series are used to obtain sterile and pyrogen-free distillate with a conductivity of 2.2 or 2.3 μS/cm without use of cartridges and adsorbents.
OmniaTap 6 and 12 are laboratory water treatment systems for producing pure and ultrapure water in relatively small quantities (< 50 liters/day). The ability to provide water of two degrees of purity in one system is the result of a combination of cutting-edge technologies. Pure water is suitable for the preparation of: buffers, microbiological media, chemical and biochemical reagents.
The Hach CL17 sc analyzer is used for continuous monitoring and determination of the concentration of free or total residual chlorine in water. Readings are not affected by changes in chlorine concentration, sample pH, temperature, flow rate, or pressure. The CL17 sc is also suitable for measuring residual permanganate content. Research demonstrates the analyzer's analytical capabilities and confirms that it is a reliable solution and a good tool for managing complex water purification and disinfection processes.
Portable dual input meter HQ2200 with pH electrode PHC10101 and dissolved oxygen sensor LDO10101
Portable dual input meter Hach with a pH electrode in the measuring range 2 - 14 pH and with a dissolved oxygen sensor in the measuring range 0.05 - 20.0 mg/L.
Portable dual input meter HQ2200 with pH electrode PHC20101 and dissolved oxygen sensor LDO10101
Portable dual input meter Hach with a pH electrode in the measuring range 0 - 14 pH and with a dissolved oxygen sensor in the measuring range 0.05 - 20.0 mg/L.
Portable three-channel meter HQ4300 with field probes of pH, conductivity and dissolved oxygen
Portable three - channels meter Hach with a pH electrode in the measuring range 2 - 14 pH with a conductivity probe in the measuring range 0.0 μS/cm - 200 μS/cm and with a dissolved oxygen sensor in the measuring range 0.05 - 20.0 mg/L.
Portable dual input meter HQ2200 with pH electrode PHC10105 and dissolved oxygen sensor LDO10105
Portable dual input meter Hach with a pH electrode in the measuring range 2 - 14 pH and with a dissolved oxygen sensor in the measuring range 0.05 - 20.0 mg/L.
Portable three - channels meter HQ4300 with laboratory probes of pH, conductivity and dissolved oxygen
Portable three - channels meter Hach with a pH electrode in the measuring range 0 - 14 pH with a conductivity probe in the measuring range 0.0 μS/cm - 200 μS/cm and with a dissolved oxygen sensor in the measuring range 0.05 - 20.0 mg/L.
Portable dual input meter HQ4200 with pH electrode PHC20101 and conductivity probe CDC40101
Portable dual input meter Hach with a pH electrode in the measuring range 0 - 14 pH and with a conductivity probe in the measuring range 0.0 μS/cm - 200 μS/cm.