Industrial analyzer of total organic carbon BioTector B3500с

Description

BioTector B3500c Online TOC Analyzer Configurations

• B5ACAA152AAC2 B3500c Analyzer, 0 - 25 ppm, 1 stream
• B5AFAA152AAC2 B3500c Analyzer, 0 - 25 ppm with 0 - 100 ppm extension, 1 stream
• B5ACAA152AAF2 B3500c Analyzer, 0 - 25 ppm, 2 streams
• B5AFAA152AAF2 B3500c Analyzer, 0 - 25 ppm with 0 - 100 ppm extension, 2 streams

TOC monitoring is one of the best tools for maintaining the cleanliness and consistency of water flows at various points in the process:

• Measuring the TOC in the incoming water will give you an idea of the required pre-treatment procedures.
• TOC analysis in process water allows you to control product quality and / or protect critical equipment.
• Testing flows of reusable water will save you the cost of post-treatment.
• Measuring the carbon content in wastewater ensures that local, state and national regulations are met.

Laboratory analysis is an excellent tool for confirming existing problems, but the introduction of online analysis can identify problems 20 to 1000 times faster than using laboratory methods.

The more complete the picture, the more efficient the work, which saves both operating and regulatory costs. TOC analysis provides useful data for maintaining high levels of water quality.

TOC analyzer for water applications

The Hach BioTector B3500c is an online analyzer specially designed for the analysis of clean water with low organic content in applications such as return condensate, boiler / feed water, cooling water and pharmaceutical water (water for injections). The analyzer uses a patented two-stage oxidation process (TSAO) to measure various forms of carbon in a liquid sample:

• total organic carbon (TOC)
• total carbon (TC)
• total inorganic carbon (TIC)
• volatile organic carbon (VOC, POC)
• total non-volatile carbon (NPOC)

Since all measured parameters can be equally important depending on the type of application and the purpose of the TOC analysis, the Hach BioTector 3500c is designed to provide all the results of the above parameters online.

The typical analysis cycle time is 6 minutes. BioTector integrates a CO2 Predictive Alarm feature capable of detecting unusually high carbon concentrations in a sample within approximately 3 minutes from the start of the analysis using CO2 data measured by a non-dispersive infrared (NDIR) CO2 analyzer. This function allows the user to take the necessary precautions. Depending on the specific application and sample type, the typical analysis cycle time and therefore the predicted CO2 alarm time can be further reduced by making changes and adjustments to the site-specific system configuration settings.

BioTector also allows the user to measure total inorganic carbon and total non-volatile carbon in a sample at a “programmable assay rate”, allowing TOC analysis, including volatile carbon, to be performed without increasing the analysis cycle time. The system is also able to carry out a TIC and NPOC analysis at a variable frequency determined from a programmable TC check point concentration level.

B3500c Specifications