Probes and sensors
This section of the catalog presents a wide selection of Hach Lange Intellical probes and electrodes for the most demanding laboratory and field tasks in the following parameters: pH, dissolved oxygen, BOD, conductivity, TDS, ORP, ammonia, ammonium, chloride, fluoride, nitrate and sodium. All Intellical probes are automatically recognized by the HQ / HQD series meters and retain their calibration data, eliminating the need to recalibrate when switching between meters. The Red Rod pH electrodes provide exceptional performance and response times for a wide variety of sample types in the laboratory. The rugged outdoor sensors are housed in a stainless steel housing and, thanks to digital technology, can be used with cables up to 30 meters. In addition to sensors and electrodes, this section contains solutions for sensor maintenance, conductivity standards and pH buffers.
Sorting:
Intellical PHC725 refillable pH electrode for low conductivity media RedRod, 1 m cable
High-performance Red Rod technology is now available for the HQD digital platform. Intellical PHC725 is a digital combination pH electrode with built-in temperature sensor.
SKU: PHC72501, PHC72501AP
Intellical PHC729 RedRod refillable surface ph electrode, 1 m cable
High-performance Red Rod technology is now available for the HQD digital platform. Intellical PHC729 is a digital combination pH electrode with built-in temperature sensor.
SKU: PHC72901, PHC72901AP
Intellical PHC735 RedRod refillable ph electrode for dirty media, 1 m cable
High-performance Red Rod technology is now available for the HQD digital platform. Intellical PHC735 is a digital combination pH electrode with built-in temperature sensor.
SKU: PHC73501, PHC73501AP
Intellical PHC745 RedRod refillable ph electrode for clogging media, 1 m cable
High-performance Red Rod technology is now available for the HQD digital platform. Intellical PHC745 is a digital combination pH electrode with built-in temperature sensor.
SKU: PHC74501, PHC74501AP
Singlet Single-Use pH Buffer Kit, pH 7,00 & 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 7.00 and 10 of pH 10.01, 20 mL each.
SKU: 2769820
Intellical PHC805 General Purpose pH Electrode RedRod 1m cable
Intellical ™ PHC805 is a digital combination pH electrode with built-in temperature sensor.
SKU: PHC80501, PHC80501AP
Buffer Solution, pH 7,00
Buffer Solution, concentration pH 7,00± 0,02, 500 mL.
SKU: 1222249
Buffer Solution, pH 10,01
Buffer Solution, concentration pH 10,01 ± 0,02, 500 mL.
SKU: 1222149
Buffer Solution, pH 1,09
Buffer Solution, concentration pH 1,09 ± 0,02, 500 mL.
SKU: S11M009
Buffer Solution, pH 4,65
Buffer Solution, concentration pH 4,65 ± 0,02, 500 mL.
SKU: S11M010
Buffer Solution, pH 9,23
Buffer Solution, concentration pH 9,23 ± 0,02, 500 mL.
SKU: S11M011
Singlet Single-Use pH Buffer, pH 4,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 4,01 ±0.02 at 25°C. Pack of 20 of pH 4,01 pH, 20 mL each.
SKU: 2770020
Singlet Single-Use pH Buffer, pH 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 7,00 ±0.02 at 25°C. Pack of 20 of pH 7,00, 20 mL each.
SKU: 2770120
Singlet Single-Use pH Buffer, pH 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 10,01 ±0.02 at 25°C. Pack of 20 of pH 10,01, 20 mL each.
SKU: 2770220
Singlet Single-use Conductivity Standard Solution, 147 µS/cm
Conductivity Standard Solution. Concentration 147 µS/cm at 25°C ±10% at 25°C. Pack of 20, 20 mL each.
SKU: 2771320
Laboratory conductivity probe Intellical CDC401, cable 1 m, 3 m
Intellical CDC401 is a digital graphite 4-pole conductometric cell with temperature sensor.
SKU: CDC40101, CDC40103
Singlet Single-use Conductivity Standard Solution, 1413 µS/cm
Singlet standard solutions for calibration of conductometers in individual sealed bags, without color coding. Packaging: 20 sachets, 20 mL each.
SKU: 2771420
Field conductivity sensor Intellical CDC401, cable 5, 10, 15, 30 m
Intellical CDC401 is a digital graphite 4-pole conductometric cell with temperature sensor. Field design.
SKU: CDC40105, CDC40110
Singlet Single-use Conductivity Standard Solution, 12,88 mS/cm
Solution with standard conductivity in individual sealed sachets, no color coding. Potassium chloride (KCl).
SKU: 2771520
Certified Conductivity Standard Solution, 111,3 mS/cm
Calibration solution for conductivity and TDS meters, concentration 111.3 mS/cm ± 0.5% (k = 2) at 25 °C, 500 ml.
SKU: S51M001
Certified Conductivity Standard Solution, 12,85 mS/cm
Calibration solution for conductometers with standard conductivity, concentration 12.85 mS / cm ± 0.5% (k = 2) at 25 ° C, 500 ml.
SKU: S51M002
Certified Conductivity Standard Solution, 1408 µS/cm
KCl 0.1D Conductivity calibration solution. Concentration 1408 μS/cm ± 0.5% at 25 °C, 500 ml.
SKU: S51M003
Certified Conductivity Standard Solution, 1015 µS/cm
Certified solution with standard conductivity, 0.05% sodium chloride (NaCl), concentration 1015 μS/cm ± 0.5% at 25 °C, 500 ml.
SKU: S51M004
Conductivity Standard Solution, 12,88 mS/cm
Calibration solution for conductivity meters, concentration 12.88 mS/cm ± 1% at 25 °C / 0.1M KCl, 500 ml.
SKU: C20C250
Sorting:
Intellical PHC725 refillable pH electrode for low conductivity media RedRod, 1 m cable
High-performance Red Rod technology is now available for the HQD digital platform. Intellical PHC725 is a digital combination pH electrode with built-in temperature sensor.
SKU: PHC72501, PHC72501AP
Intellical PHC729 RedRod refillable surface ph electrode, 1 m cable
High-performance Red Rod technology is now available for the HQD digital platform. Intellical PHC729 is a digital combination pH electrode with built-in temperature sensor.
SKU: PHC72901, PHC72901AP
Intellical PHC735 RedRod refillable ph electrode for dirty media, 1 m cable
High-performance Red Rod technology is now available for the HQD digital platform. Intellical PHC735 is a digital combination pH electrode with built-in temperature sensor.
SKU: PHC73501, PHC73501AP
Intellical PHC745 RedRod refillable ph electrode for clogging media, 1 m cable
High-performance Red Rod technology is now available for the HQD digital platform. Intellical PHC745 is a digital combination pH electrode with built-in temperature sensor.
SKU: PHC74501, PHC74501AP
Singlet Single-Use pH Buffer Kit, pH 7,00 & 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 7.00 and 10 of pH 10.01, 20 mL each.
SKU: 2769820
Intellical PHC805 General Purpose pH Electrode RedRod 1m cable
Intellical ™ PHC805 is a digital combination pH electrode with built-in temperature sensor.
SKU: PHC80501, PHC80501AP
Buffer Solution, pH 7,00
Buffer Solution, concentration pH 7,00± 0,02, 500 mL.
SKU: 1222249
Buffer Solution, pH 10,01
Buffer Solution, concentration pH 10,01 ± 0,02, 500 mL.
SKU: 1222149
Buffer Solution, pH 1,09
Buffer Solution, concentration pH 1,09 ± 0,02, 500 mL.
SKU: S11M009
Buffer Solution, pH 4,65
Buffer Solution, concentration pH 4,65 ± 0,02, 500 mL.
SKU: S11M010
Buffer Solution, pH 9,23
Buffer Solution, concentration pH 9,23 ± 0,02, 500 mL.
SKU: S11M011
Singlet Single-Use pH Buffer, pH 4,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 4,01 ±0.02 at 25°C. Pack of 20 of pH 4,01 pH, 20 mL each.
SKU: 2770020
Singlet Single-Use pH Buffer, pH 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 7,00 ±0.02 at 25°C. Pack of 20 of pH 7,00, 20 mL each.
SKU: 2770120
Singlet Single-Use pH Buffer, pH 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 10,01 ±0.02 at 25°C. Pack of 20 of pH 10,01, 20 mL each.
SKU: 2770220
Singlet Single-use Conductivity Standard Solution, 147 µS/cm
Conductivity Standard Solution. Concentration 147 µS/cm at 25°C ±10% at 25°C. Pack of 20, 20 mL each.
SKU: 2771320
Laboratory conductivity probe Intellical CDC401, cable 1 m, 3 m
Intellical CDC401 is a digital graphite 4-pole conductometric cell with temperature sensor.
SKU: CDC40101, CDC40103
Singlet Single-use Conductivity Standard Solution, 1413 µS/cm
Singlet standard solutions for calibration of conductometers in individual sealed bags, without color coding. Packaging: 20 sachets, 20 mL each.
SKU: 2771420
Field conductivity sensor Intellical CDC401, cable 5, 10, 15, 30 m
Intellical CDC401 is a digital graphite 4-pole conductometric cell with temperature sensor. Field design.
SKU: CDC40105, CDC40110
Singlet Single-use Conductivity Standard Solution, 12,88 mS/cm
Solution with standard conductivity in individual sealed sachets, no color coding. Potassium chloride (KCl).
SKU: 2771520
Certified Conductivity Standard Solution, 111,3 mS/cm
Calibration solution for conductivity and TDS meters, concentration 111.3 mS/cm ± 0.5% (k = 2) at 25 °C, 500 ml.
SKU: S51M001
Certified Conductivity Standard Solution, 12,85 mS/cm
Calibration solution for conductometers with standard conductivity, concentration 12.85 mS / cm ± 0.5% (k = 2) at 25 ° C, 500 ml.
SKU: S51M002
Certified Conductivity Standard Solution, 1408 µS/cm
KCl 0.1D Conductivity calibration solution. Concentration 1408 μS/cm ± 0.5% at 25 °C, 500 ml.
SKU: S51M003
Certified Conductivity Standard Solution, 1015 µS/cm
Certified solution with standard conductivity, 0.05% sodium chloride (NaCl), concentration 1015 μS/cm ± 0.5% at 25 °C, 500 ml.
SKU: S51M004
Conductivity Standard Solution, 12,88 mS/cm
Calibration solution for conductivity meters, concentration 12.88 mS/cm ± 1% at 25 °C / 0.1M KCl, 500 ml.
SKU: C20C250

