Probes and sensors
This section of the catalog presents a wide selection of Hach Lange Intellical probes and electrodes for the most demanding laboratory and field tasks in the following parameters: pH, dissolved oxygen, BOD, conductivity, TDS, ORP, ammonia, ammonium, chloride, fluoride, nitrate and sodium. All Intellical probes are automatically recognized by the HQ / HQD series meters and retain their calibration data, eliminating the need to recalibrate when switching between meters. The Red Rod pH electrodes provide exceptional performance and response times for a wide variety of sample types in the laboratory. The rugged outdoor sensors are housed in a stainless steel housing and, thanks to digital technology, can be used with cables up to 30 meters. In addition to sensors and electrodes, this section contains solutions for sensor maintenance, conductivity standards and pH buffers.
FiltersSorting:
Ion Selective Electrode (ISE) Intellical ISENH3181, Ammonia (NH3); cable 1, 3 m
Intellical ISENH3181 is a digital combined gas ion-selective electrode (ISE) with replaceable membrane module.
SKU: ISENH318101, ISENH318103
Ion Selective Electrode (ISE) Intellical ISENH3181, Ammonia (NH3) with calibration reagents
The Intellical ISE Kit for Ammonia analysis contains everything you need to measure ammonia (NH3) concentration with the HQD series meters.
SKU: ISENH3181AP
Ion Selective Electrode (ISE) Intellical ISENH4181, ammonium (NH4 +); cable 1, 3 m
The Intellical ISENH4181 is a digital Ion Selective Electrode (ISE) with Dritek disposable gel, a porous Teflon annular diaphragm and an integrated temperature sensor.
SKU: ISENH418101, ISENH418103
Ion Selective Electrode (ISE) Intellical ISENH4181, ammonium (NH4 +) with calibration reagents
The Intellical Ammonium ISE Analysis Package contains everything you need to determine ammonium (NH4 +) with the HQD series meters.
SKU: ISENH4181AP
Ion Selective Electrode (ISE) Intellical ISECL181, Chlorides (CL-); cable 1, 3 m
The Intellical ISECL181 is a digital combination Ion Selective Electrode (ISE) for chloride determination with Dritek single-use gel and built-in temperature sensor.
SKU: ISECL18101, ISECL18103
Ion Selective Electrode (ISE) Intellical ISECL181 Chlorides (CL-) with calibration reagents
The Intellical Clorine ISE Analysis Package contains everything needed to determine chloride (Cl-) with the HQD series meters.
SKU: ISECL181AP
Ion Selective Electrode (ISE) Intellical ISEF121, fluoride (F-); cable 1, 3 m
The Intellical ISEF121 is a digital combined ion selective electrode (ISE) for fluoride determination with an integrated temperature sensor.
SKU: ISEF12101, ISEF12103
Ion Selective Electrode (ISE) Intellical ISEF121 Fluoride (F-) with calibration reagents
The Intellical Fluoride ISE Analysis Package contains everything needed to determine fluoride (F-) with HQD series meters.
SKU: ISEF121AP
Ion Selective Electrode (ISE) Intellical ISENO3181, Nitrate (NO3-); cable 1, 3 m
Intellical ISENO3181 is a digital combined ion selective electrode (ISE) for the determination of nitrates with a built-in temperature sensor.
SKU: ISENO318101, ISENO318103
Ion Selective Electrode (ISE) Intellical ISENO3181 Nitrate (NO3-) with calibration reagents
The Intellical Nitrate ISE Analysis Package contains everything you need to determine nitrate (NO3-) with the HQD series meters.
SKU: ISENO3181AP
Ion Selective Electrode (ISE) Intellical ISENa381, Sodium (Na +); cable 1, 3 m
Intellical ISENa381 is a digital combination ion selective electrode (ISE) for sodium determination with a built-in temperature sensor.
SKU: ISENA38101, ISENA38103
Ion Selective Electrode (ISE) Intellical ISENA38101, Sodium (Na +) with calibration reagents
The Intellical Sodium ISE Analysis Package contains everything you need to determine sodium (Na +) with the HQD series meters.
SKU: ISENA381AP
Laboratory combination ORP / RedOx Intellical MTC101 sensor; cable length 1, 3 m
Intellical MTC101 is a digital redox potential (ORP) sensor with single use gel electrolyte and built-in temperature sensor.
SKU: MTC10101, MTC10103
Field ORP / redox electrode Intellical MTC101; cable length 5, 10, 15, 30 m
Intellical MTC101 is a digital combined redox potential (ORP / redox) electrode with built-in temperature sensor.
SKU: MTC10105, MTC10110
Laboratory refillable electrode ORP / RedOx Intellical MTC301; cable length 1, 3 m
Intellical MTC301 is a digital sensor for determining the redox potential (ORP / redox potential) with a built-in temperature sensor.
SKU: MTC30101, MTC30103
ISE Standard sodium solution (Na +) concentration 100 mg/l; volume 500 ml, 1 L
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 2318149, 2318153
ISE Ammonia Standard Solution, 1 mg/L, 500 mL
ISE Standard Solution. Ammonia, 1,00 mg/L ±0.03 mg/L NH3-N. 500 mL bottle.
SKU: 189149
ISE Ammonia Standard Solution, 100 mg/L, 500 mL
ISE Standard Solution. Ammonia, 100 mg/L ±2 mg/L NH3-N. 500 mL bottle.
SKU: 2406549
ISE Ammonia Standard Solution, 10 mg/L, 500 mL
ISE Standard Solution. Ammonia, 10,0 mg/L ±0,5 mg/L NH3-N. 500 mL bottle.
SKU: 15349
ISE standard sodium solution (Na +) concentration 1000 mg/l; volume 500 ml
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1474949
ISE Ammonia Standard Solution, 1000 mg/L, 1 L
ISE Standard Solution. Ammonia, 1000 mg/L ±20 mg/L NH3-N. 1 L bottle.
SKU: 2354153
Ammonium Ionic Strength Adjustor (ISA) Powder Pillows, pk/100
Ionic Strength Adjustor (ISA) for Ammonium determinations by Ion Selective Electrode (ISE) method. Powder form prevent from diluting samples. Ideal for low Ammonium level readings. Eliminate most interferences. Pack of 100 powder pillows.
SKU: 2980699
Ionic Strength Adjustor Sodium / Potassium (ISA), 100 pieces
Ionic Strength Regulator for Hach Ion Selective Electrodes.
SKU: 4451569
ISE standard solution, nitrate (NO3-N) concentration 1 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 204649
Sorting:
Ion Selective Electrode (ISE) Intellical ISENH3181, Ammonia (NH3); cable 1, 3 m
Intellical ISENH3181 is a digital combined gas ion-selective electrode (ISE) with replaceable membrane module.
SKU: ISENH318101, ISENH318103
Ion Selective Electrode (ISE) Intellical ISENH3181, Ammonia (NH3) with calibration reagents
The Intellical ISE Kit for Ammonia analysis contains everything you need to measure ammonia (NH3) concentration with the HQD series meters.
SKU: ISENH3181AP
Ion Selective Electrode (ISE) Intellical ISENH4181, ammonium (NH4 +); cable 1, 3 m
The Intellical ISENH4181 is a digital Ion Selective Electrode (ISE) with Dritek disposable gel, a porous Teflon annular diaphragm and an integrated temperature sensor.
SKU: ISENH418101, ISENH418103
Ion Selective Electrode (ISE) Intellical ISENH4181, ammonium (NH4 +) with calibration reagents
The Intellical Ammonium ISE Analysis Package contains everything you need to determine ammonium (NH4 +) with the HQD series meters.
SKU: ISENH4181AP
Ion Selective Electrode (ISE) Intellical ISECL181, Chlorides (CL-); cable 1, 3 m
The Intellical ISECL181 is a digital combination Ion Selective Electrode (ISE) for chloride determination with Dritek single-use gel and built-in temperature sensor.
SKU: ISECL18101, ISECL18103
Ion Selective Electrode (ISE) Intellical ISECL181 Chlorides (CL-) with calibration reagents
The Intellical Clorine ISE Analysis Package contains everything needed to determine chloride (Cl-) with the HQD series meters.
SKU: ISECL181AP
Ion Selective Electrode (ISE) Intellical ISEF121, fluoride (F-); cable 1, 3 m
The Intellical ISEF121 is a digital combined ion selective electrode (ISE) for fluoride determination with an integrated temperature sensor.
SKU: ISEF12101, ISEF12103
Ion Selective Electrode (ISE) Intellical ISEF121 Fluoride (F-) with calibration reagents
The Intellical Fluoride ISE Analysis Package contains everything needed to determine fluoride (F-) with HQD series meters.
SKU: ISEF121AP
Ion Selective Electrode (ISE) Intellical ISENO3181, Nitrate (NO3-); cable 1, 3 m
Intellical ISENO3181 is a digital combined ion selective electrode (ISE) for the determination of nitrates with a built-in temperature sensor.
SKU: ISENO318101, ISENO318103
Ion Selective Electrode (ISE) Intellical ISENO3181 Nitrate (NO3-) with calibration reagents
The Intellical Nitrate ISE Analysis Package contains everything you need to determine nitrate (NO3-) with the HQD series meters.
SKU: ISENO3181AP
Ion Selective Electrode (ISE) Intellical ISENa381, Sodium (Na +); cable 1, 3 m
Intellical ISENa381 is a digital combination ion selective electrode (ISE) for sodium determination with a built-in temperature sensor.
SKU: ISENA38101, ISENA38103
Ion Selective Electrode (ISE) Intellical ISENA38101, Sodium (Na +) with calibration reagents
The Intellical Sodium ISE Analysis Package contains everything you need to determine sodium (Na +) with the HQD series meters.
SKU: ISENA381AP
Laboratory combination ORP / RedOx Intellical MTC101 sensor; cable length 1, 3 m
Intellical MTC101 is a digital redox potential (ORP) sensor with single use gel electrolyte and built-in temperature sensor.
SKU: MTC10101, MTC10103
Field ORP / redox electrode Intellical MTC101; cable length 5, 10, 15, 30 m
Intellical MTC101 is a digital combined redox potential (ORP / redox) electrode with built-in temperature sensor.
SKU: MTC10105, MTC10110
Laboratory refillable electrode ORP / RedOx Intellical MTC301; cable length 1, 3 m
Intellical MTC301 is a digital sensor for determining the redox potential (ORP / redox potential) with a built-in temperature sensor.
SKU: MTC30101, MTC30103
ISE Standard sodium solution (Na +) concentration 100 mg/l; volume 500 ml, 1 L
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 2318149, 2318153
ISE Ammonia Standard Solution, 1 mg/L, 500 mL
ISE Standard Solution. Ammonia, 1,00 mg/L ±0.03 mg/L NH3-N. 500 mL bottle.
SKU: 189149
ISE Ammonia Standard Solution, 100 mg/L, 500 mL
ISE Standard Solution. Ammonia, 100 mg/L ±2 mg/L NH3-N. 500 mL bottle.
SKU: 2406549
ISE Ammonia Standard Solution, 10 mg/L, 500 mL
ISE Standard Solution. Ammonia, 10,0 mg/L ±0,5 mg/L NH3-N. 500 mL bottle.
SKU: 15349
ISE standard sodium solution (Na +) concentration 1000 mg/l; volume 500 ml
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1474949
ISE Ammonia Standard Solution, 1000 mg/L, 1 L
ISE Standard Solution. Ammonia, 1000 mg/L ±20 mg/L NH3-N. 1 L bottle.
SKU: 2354153
Ammonium Ionic Strength Adjustor (ISA) Powder Pillows, pk/100
Ionic Strength Adjustor (ISA) for Ammonium determinations by Ion Selective Electrode (ISE) method. Powder form prevent from diluting samples. Ideal for low Ammonium level readings. Eliminate most interferences. Pack of 100 powder pillows.
SKU: 2980699
Ionic Strength Adjustor Sodium / Potassium (ISA), 100 pieces
Ionic Strength Regulator for Hach Ion Selective Electrodes.
SKU: 4451569
ISE standard solution, nitrate (NO3-N) concentration 1 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 204649