Probes and sensors
This section of the catalog presents a wide selection of Hach Lange Intellical probes and electrodes for the most demanding laboratory and field tasks in the following parameters: pH, dissolved oxygen, BOD, conductivity, TDS, ORP, ammonia, ammonium, chloride, fluoride, nitrate and sodium. All Intellical probes are automatically recognized by the HQ / HQD series meters and retain their calibration data, eliminating the need to recalibrate when switching between meters. The Red Rod pH electrodes provide exceptional performance and response times for a wide variety of sample types in the laboratory. The rugged outdoor sensors are housed in a stainless steel housing and, thanks to digital technology, can be used with cables up to 30 meters. In addition to sensors and electrodes, this section contains solutions for sensor maintenance, conductivity standards and pH buffers.
Sorting:
1200-S sc Digital pH sensor for SC controller
Hach offers a wide range of analog and digital pH and ORP sensors to meet your in-line pH or ORP monitoring needs in water or other liquids.
SKU: LXV426.99.10001
HI7007L buffer solution pH 7.01, volume 500 ml
pH 7.01 is the most widely used value of all buffer solutions.
SKU: HI7007L
Singlet Single-Use pH Buffer Kit, pH 4,01 & 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 4,01 & 7,00, 20 mL each.
SKU: 2769920
103635 WTW pH electrode SenTix 41 with temperature sensor
Standard electrode with gel electrolyte and built-in temperature sensor for measuring pH in the laboratory and in the field.
SKU: 103635
Field pH electrode PHC101, cable length 5 m, 10 m, 15 m, 30 m
Intellical PHC101 is a digital combination pH electrode with built-in temperature sensor. In a field rugged housing.
SKU: PHC10105
109705 WTW Electrolyte KCl 3 mol/l
The electrolyte is used as a filling solution for refillable electrodes and as a storage solution for all types of pH electrodes.
SKU: 109705
Laboratory refillable pH electrode PHC301, cable length 1 m, 3 m
Intellical PHC301 is a refillable digital combination pH electrode with built-in temperature sensor. Laboratory design.
SKU: PHC30101, PHC30103
Laboratory pH electrode PHC101, cable length 1 m, 3 m
Intellical PHC101 is a digital combination pH electrode with built-in temperature sensor. Laboratory execution.
SKU: PHC10101, PHC10103
108700 WTW TEP 4: Technical buffer solution, pH 4.01 (1 liter)
Buffer solution for pH meters calibration. Ph value is 4.01
SKU: 108700
Laboratory dissolved oxygen sensor LDO101, cable 1 m, 3 m
Intellical LDO101 - a digital luminescent / optical sensor of dissolved oxygen (LDO technology).
SKU: LDO10101, LDO10103
Field dissolved oxygen sensor LDO101, cable 5, 10, 15, 30 m
Intellical LDO101 is a digital luminescent / optical dissolved oxygen sensor (LDO technology). Luminescence based LDO technology - no electrolyte change required, no interference due to deposits or hydrogen sulfide.
SKU: LDO10105, LDO10110
Dissolved oxygen sensor Intellical LBOD101 for BOD measurement
Luminescent / optical dissolved oxygen (LDO) sensor for BOD measurement, 1 m cable.
SKU: LBOD10101
Laboratory refillable pH electrode PHC281, cable length 1 m, 3 m
Intellical PHC281 is a digital combination pH electrode with built-in temperature sensor. The PHC281 is a refillable pH probe designed for challenging samples.
SKU: PHC28101, PHC28103
ISE Ammonia Standard Solution, 1000 mg/L, 1 L
ISE Standard Solution. Ammonia, 1000 mg/L ±20 mg/L NH3-N. 1 L bottle.
SKU: 2354153
Filling Solution, Reference, Saturated KCl, 59 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), Saturated, 59 mL bottle.
SKU: 25118026
Ion Selective Electrode (ISE) Intellical ISENH3181, Ammonia (NH3) with calibration reagents
The Intellical ISE Kit for Ammonia analysis contains everything you need to measure ammonia (NH3) concentration with the HQD series meters.
SKU: ISENH3181AP
ORP calibration solution in ampoules (Light's solution)
Light's solution in ampoules for calibration of ORP meters. The package contains 20 ampoules of 20 ml.
SKU: 2612520
Certified Buffer Standard Solution, pH 1.679
Certified Buffer Standard Solution,1.679 ±0.010 pH at 25°C.
SKU: S11M001
Buffer solution pH 10.01, 125 ml
Calibration solution with pH 10.01 ± 0.02 at 25 ° C for ph electrodes.
SKU: LZW9470.99
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
LDO sc process dissolved oxygen sensor; cable 10 meters
LDO Process Dissolved Oxygen Sensor for SC Series Online Controllers. Available with 10 meter cable.
SKU: LXV416.99.20001
SKU: ACF60
SKU: HD-960L
Ionic Strength Adjustor Sodium / Potassium (ISA), 100 pieces
Ionic Strength Regulator for Hach Ion Selective Electrodes.
SKU: 4451569
Sorting:
1200-S sc Digital pH sensor for SC controller
Hach offers a wide range of analog and digital pH and ORP sensors to meet your in-line pH or ORP monitoring needs in water or other liquids.
SKU: LXV426.99.10001
HI7007L buffer solution pH 7.01, volume 500 ml
pH 7.01 is the most widely used value of all buffer solutions.
SKU: HI7007L
Singlet Single-Use pH Buffer Kit, pH 4,01 & 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 4,01 & 7,00, 20 mL each.
SKU: 2769920
103635 WTW pH electrode SenTix 41 with temperature sensor
Standard electrode with gel electrolyte and built-in temperature sensor for measuring pH in the laboratory and in the field.
SKU: 103635
Field pH electrode PHC101, cable length 5 m, 10 m, 15 m, 30 m
Intellical PHC101 is a digital combination pH electrode with built-in temperature sensor. In a field rugged housing.
SKU: PHC10105
109705 WTW Electrolyte KCl 3 mol/l
The electrolyte is used as a filling solution for refillable electrodes and as a storage solution for all types of pH electrodes.
SKU: 109705
Laboratory refillable pH electrode PHC301, cable length 1 m, 3 m
Intellical PHC301 is a refillable digital combination pH electrode with built-in temperature sensor. Laboratory design.
SKU: PHC30101, PHC30103
Laboratory pH electrode PHC101, cable length 1 m, 3 m
Intellical PHC101 is a digital combination pH electrode with built-in temperature sensor. Laboratory execution.
SKU: PHC10101, PHC10103
108700 WTW TEP 4: Technical buffer solution, pH 4.01 (1 liter)
Buffer solution for pH meters calibration. Ph value is 4.01
SKU: 108700
Laboratory dissolved oxygen sensor LDO101, cable 1 m, 3 m
Intellical LDO101 - a digital luminescent / optical sensor of dissolved oxygen (LDO technology).
SKU: LDO10101, LDO10103
Field dissolved oxygen sensor LDO101, cable 5, 10, 15, 30 m
Intellical LDO101 is a digital luminescent / optical dissolved oxygen sensor (LDO technology). Luminescence based LDO technology - no electrolyte change required, no interference due to deposits or hydrogen sulfide.
SKU: LDO10105, LDO10110
Dissolved oxygen sensor Intellical LBOD101 for BOD measurement
Luminescent / optical dissolved oxygen (LDO) sensor for BOD measurement, 1 m cable.
SKU: LBOD10101
Laboratory refillable pH electrode PHC281, cable length 1 m, 3 m
Intellical PHC281 is a digital combination pH electrode with built-in temperature sensor. The PHC281 is a refillable pH probe designed for challenging samples.
SKU: PHC28101, PHC28103
ISE Ammonia Standard Solution, 1000 mg/L, 1 L
ISE Standard Solution. Ammonia, 1000 mg/L ±20 mg/L NH3-N. 1 L bottle.
SKU: 2354153
Filling Solution, Reference, Saturated KCl, 59 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), Saturated, 59 mL bottle.
SKU: 25118026
Ion Selective Electrode (ISE) Intellical ISENH3181, Ammonia (NH3) with calibration reagents
The Intellical ISE Kit for Ammonia analysis contains everything you need to measure ammonia (NH3) concentration with the HQD series meters.
SKU: ISENH3181AP
ORP calibration solution in ampoules (Light's solution)
Light's solution in ampoules for calibration of ORP meters. The package contains 20 ampoules of 20 ml.
SKU: 2612520
Certified Buffer Standard Solution, pH 1.679
Certified Buffer Standard Solution,1.679 ±0.010 pH at 25°C.
SKU: S11M001
Buffer solution pH 10.01, 125 ml
Calibration solution with pH 10.01 ± 0.02 at 25 ° C for ph electrodes.
SKU: LZW9470.99
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
LDO sc process dissolved oxygen sensor; cable 10 meters
LDO Process Dissolved Oxygen Sensor for SC Series Online Controllers. Available with 10 meter cable.
SKU: LXV416.99.20001
SKU: ACF60
SKU: HD-960L
Ionic Strength Adjustor Sodium / Potassium (ISA), 100 pieces
Ionic Strength Regulator for Hach Ion Selective Electrodes.
SKU: 4451569