HomeCatalogMeters and probes pH Oxygen ConductivityProbes and sensors

Probes and sensors

lab and field probes This section of the catalog presents a wide selection of Hach Lange Intellical probes and electrodes for the most demanding laboratory and field tasks in the following parameters: pH, dissolved oxygen, BOD, conductivity, TDS, ORP, ammonia, ammonium, chloride, fluoride, nitrate and sodium. All Intellical probes are automatically recognized by the HQ / HQD series meters and retain their calibration data, eliminating the need to recalibrate when switching between meters. The Red Rod pH electrodes provide exceptional performance and response times for a wide variety of sample types in the laboratory. The rugged outdoor sensors are housed in a stainless steel housing and, thanks to digital technology, can be used with cables up to 30 meters. In addition to sensors and electrodes, this section contains solutions for sensor maintenance, conductivity standards and pH buffers.

Filters

Reset

Type

Conductivity Standard Solution 23 Field 3 Filling solution 7 Industrial 18 Laboratory 31 Liquid reagents 1 On-line 1 Portable 3 Powder pillows 13 Standard pH solutions 27

Industry

Pulp and paper 48 Power generation 51 Chemical 96 Municipal 137 Transport 47 Food and Beverage 133 Ecology 59 Glass 47 Pharmaceutical 59 Semiconductor 7

Brand name

Centec 1 HORIBA 15 Hach 110 Hanna Instruments 3 Mettler Toledo 4 Optek 2 ProMinent 3 Sigrist 1 WTW 3 РreSens 2

Parameters

Ammonia 4 Ammonium 3 Chloride 6 Chlorine free 1 Chromaticity 1 Conductivity 28 Dissolved oxygen 11 Fluoride 3 Nitrate 7 ORP (redox potential) 7 Pressure 1 Resistivity 5 Salinity 2 Sodium 5 TDS (Total Dissolved Solids) 3 Temperature 14 Turbidity 3 pH 64

Measurement Range

-1500 - 1500 mV 1 0 - 10 мкСм/см до 0 - 850 мСм/см 1 0 - 12 pH 1 0 - 14 pH 11 0 - 22.5 mg/L O2 2 0...14 2 0.01 - 20 mg/L O2 1 0.01 mg/L (5 x 10-7 M) - 14 g/L (1 M) NH3-N 2 0.01 mg/L (5 x 10-7 M) - 19 g/L (1 M) F- 2 0.018 mg/L (10-6 M) - 9 g/L (0.5 M) NH4-N 2 0.023 mg/L (1 x 10-6 M) - 23 g/L (1 M) Na+ 2 0.05 - 20.0 mg/L O2 2 0.1 mg/L (3 x 10-6 M) - 35.5 g/L (1 M) Cl- 2 0.1 mg/L (7 x 10-6 M) - 14 g/L (1 M) NO3-N 2 12.85 mS/cm 1 12.88 mS/cm 4 25 µS/cm 1 100 µS/cm 1 111.3 mS/cm 1 146.9 µS/cm 1 147 μS/cm 3 180 µS/cm 1 1000 μS/cm 1 1015 µS/cm 1 1408 µS/cm 1 1413 µS/cm 4 1990 µS/cm 1 10000 µS/cm 1 18000 µS/cm 1 pH 0…14 1 pH 1.09 1 pH 1.679 1 pH 1–12 3 pH 4,005 1 pH 4.01 5 pH 4.01 and 7.00 1 pH 4.65 1 pH 6,86 1 pH 6.865 1 pH 7.00 9 pH 7.00 and 10.01 1 pH 7.01 1 pH 7.413 1 pH 9.23 1 pH 9.180 1 pH 10.01 7 pH 10.012 1 pH 12.45 1 ± 1200 mV 3

Accuracy

± 0.01 pH 5 ±0.02 mV or 0.05% 15 ± 0.02 pH 4 ±0.1 mg/L 0-8 mg/L; ±0.2 mg/L for greater than 8 2 ±0.5% 2

Operating temperature range

-10 - 100 °C 4 -10 - 110 °C 2 -10 – 40 °C 1 -10 – 90 °C 1 -25...+65 °C 1 0 - 40 °C 1 0 - 50 °C 12 0 - 80 °C 7 0 - 100 °C 3 0…+50 °C 1 5 - 50 °C 4 −5…100 °C 1

Features

Double Junction; до 80 °C / 8 бар; IP65; PG 13.5; устойчивость к водорастворимым химикатам 1 До 80 °C / 6 бар; RoHS; защита кабеля от скручивания; версия PHEPT с Pt100 1 Пластиковый корпус из поликарбоната; без монтажной резьбы; только атмосферное давление; для ручных измерений; RoHS 1

Sensor type

4-pole graphite 2 Gas sensing: glass with replaceable NH3 sensitive membrane 2 Glass 11 Lumiphore 2 Platinum disc 3 Solid state PVC membrane 4 Solid state crystalline membrane 4

Compliance with the standard

IP54 1 IP65 4

Number of tests

15 3 20 3 50 2 250 2

Measurement Range (2)

0...100 °C 1 0…100 °C 1

Concentration

1.00 ±0.01 mg/L NO3-N 1 10 ± 0.1 mg/L NO3-N 1 100 mg/L Cl- 1 100 mg/L Na+ 1 100 ± 0.1 mg/L NO3-N 1 1000 mg/L Cl- 1 1000 mg/L NH3-N 1 1000 mg/L Na+ 1 1000 ± 10 mg/L NO3-N 1 ISA 3

Reset

Sorting:

103635 WTW pH electrode SenTix 41 with temperature sensor

Standard electrode with gel electrolyte and built-in temperature sensor for measuring pH in the laboratory and in the field.

SKU: 103635