+7 (495) 201-53-02
ARC PreSens Round Container Adapter (Velcro® tape)
SKU: ARC
Manufacturer: РreSens
Availability: Order only
The adjustable Velcro® adapter can be used for round containers with a diameter of 2.5 to 20 cm (1 to 8 inches). Designed to hold polymer optical fiber in place while reading O2, pH, CO2 sensor readings. The SMA connector on this adapter must be facing the built-in optical point. Then a polymer optical fiber must be connected to the connector to read the readings.
- Suitable for many round containers
- Accurate sensor readout
- Compatible with all devices with SMA connector
- Velcro® tape dimensions: 1000 x 22 x 4 mm
Recommended products
Recommended products
Portable oxygen meter Fibox 4 trace
The Fibox 4 trace is a portable and fully self-contained optical oxygen meter for measuring O2 levels. Compatible with oxygen sensors ranging from 1 ppb to 100%
SKU: Fibox 4 trace
Compare
Multichannel oxygen meter OXY-4 SMA (G3)
The PreSens OXY 4 SMA multichannel oxygen meter can measure O2 in both liquid and gaseous phase, compatible with non-invasive sensors, immersion probes and flow cells type PSt3 (detection limit 15 ppb dissolved oxygen, 0 - 100% oxygen).
SKU: OXY-4 SMA (G3)
Compact oxygen meter OXY-1 SMA
PreSens OXY-1 SMA is compatible with optical point type PSt3 and allows measurements of both gaseous and dissolved oxygen in the range of 0 -100% O2. Due to its small external dimensions, the oximeter can be installed almost anywhere.
SKU: OXY-1 SMA
Polymer Optical Fiber for PreSens Measuring Instruments
Polymer optical fiber serves as a universal connector between the meter and the PreSens. POV with SMA connector is compatible with Fibox, OXY-1 SMA, OXY-1 WM, OXY mini and pH mini meters, as well as pCO2 mini. POF with ST connector is compatible with Microx 4 and OXY-1 ST series meters.
SKU: POF
Recommended products
Portable oxygen meter Fibox 4 trace
The Fibox 4 trace is a portable and fully self-contained optical oxygen meter for measuring O2 levels. Compatible with oxygen sensors ranging from 1 ppb to 100%
SKU: Fibox 4 trace
Multichannel oxygen meter OXY-4 SMA (G3)
The PreSens OXY 4 SMA multichannel oxygen meter can measure O2 in both liquid and gaseous phase, compatible with non-invasive sensors, immersion probes and flow cells type PSt3 (detection limit 15 ppb dissolved oxygen, 0 - 100% oxygen).
SKU: OXY-4 SMA (G3)
Compact oxygen meter OXY-1 SMA
PreSens OXY-1 SMA is compatible with optical point type PSt3 and allows measurements of both gaseous and dissolved oxygen in the range of 0 -100% O2. Due to its small external dimensions, the oximeter can be installed almost anywhere.
SKU: OXY-1 SMA
Polymer Optical Fiber for PreSens Measuring Instruments
Polymer optical fiber serves as a universal connector between the meter and the PreSens. POV with SMA connector is compatible with Fibox, OXY-1 SMA, OXY-1 WM, OXY mini and pH mini meters, as well as pCO2 mini. POF with ST connector is compatible with Microx 4 and OXY-1 ST series meters.
SKU: POF
