Online analyzers

Reset

Type

Field 2 Industrial 24 On-line 1

Industry

Pulp and paper 2 Power generation 4 Chemical 7 Municipal 29 Food and Beverage 5 Ecology 3 Pharmaceutical 3 Semiconductor 6

Brand name

HORIBA 4 Hach 5 Kemtrak 1 ProMinent 19

Parameters

Ammonium 1 Calcium Hardness 1 Chlorine free 3 Chlorine total 1 Hardness 1 Hardness Ca and Mg 1 Hardness of water 1 Orthophosphates 1 Ozone 1

Measurement Range

0 - 10 mg/L Cl2 1 0,025 - 1 mg/L CaCO3 1 0.005 - 2 mg/L O3 1 0.05 - 15.0 mg/L PO4-P 1 0…2 мг/л 1 0…3 мг/л 1 1 - 10 mg/L NH4-N 1

Measurement method

Amperometric 1 ISE 1

Operating temperature range

-5…45 °C 1

Compliance with the standard

IP65 1

Measurement Range (2)

1.0 - 50 mg/L PO4-P 1 10 - 100 mg/L NH4-N 1

Reset

Sorting:

SKU: 1130517

View product Compare

EZ3000 / EZ3001 Ion Selective Ammonium Analyzers

Industrial analyzer for periodic (discontinuous) analysis of the concentration of ammonium NH4-N in water. Direct measurement with combined ion-selective electrode according to the APHA 4500-NH3 (D) standard method.

SKU: EZ3000.99001C02, EZ3001.99001C02

View product Compare

SKU: 1023426

View product Compare

Colorimetric Hardness Analyzer Envirolyzer EZ1000 Series

EZ1000 series analyzers use the colorimetric method of analysis: EZ1016 total hardness, EZ1017 calcium hardness, EZ1304 total hardness and calcium hardness, EZ1306 total hardness, calcium and magnesium hardness. Standard measuring range: 0.025 - 1 mg/L CaCO3.

SKU: EZ1016.99001C02

View product Compare

SKU: 1104626

View product Compare

Orthophosphate analyzer PHOSPHAX sc

With detection limits ranging from 0.05 mg/L to 50 mg/L, the Phosphax sc phosphate analyzer can be used anywhere in the wastewater treatment process, from water entering the treatment plant or starting a phosphorus removal process where phosphate levels can be high, to discharged wastewater with a low level of phosphate.

SKU: LXV422.99.13001

View product Compare

SKU: 1122056

View product Compare

9185 sc Amperometric Ozone Analyzer

The 9185 sc from Hach is a single-channel, online industrial sensor that measures ozone in drinking water treatment plants, distribution networks and other applications where ppm and ppb ozone monitoring is required. This instrument uses an amperometric method to measure the concentration of ozone. The membrane allows selective diffusion of ozone molecules to the amperometric sensor. Suitable for use in water with low conductivity.

SKU: LXV433.99.00001

View product Compare

SKU: 1038016

View product Compare

CL17 sc Photometric Chlorine Analyzer

The Hach CL17 sc analyzer is used for continuous monitoring and determination of the concentration of free or total residual chlorine in water. Readings are not affected by changes in chlorine concentration, sample pH, temperature, flow rate, or pressure. The CL17 sc is also suitable for measuring residual permanganate content. Research demonstrates the analyzer's analytical capabilities and confirms that it is a reliable solution and a good tool for managing complex water purification and disinfection processes.

SKU: 8574500, 8574400

View product Compare

SKU: 1136433

View product Compare