Reagents for electrodes
Sorting:
51350018 Technical buffer pH 4.01, 6 x 250 ml
pH buffer with a value of 4.01 for calibrating ph electrodes and ph meters.
SKU: 51350018
HI7007L buffer solution pH 7.01, volume 500 ml
pH 7.01 is the most widely used value of all buffer solutions.
SKU: HI7007L
51350022 Technical buffer pH 9.21, 6 x 250 ml
pH buffer for calibrating electrodes and pH meters.
SKU: 51350022
HI7010L buffer pH 10.01, volume 500 ml
A pH 10.01 buffer solution is commonly used to calibrate equipment used to analyze samples of water and other liquids.
SKU: HI7010L
Singlet Single-Use pH Buffer Kit, pH 4,01 & 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 4,01 & 7,00, 20 mL each.
SKU: 2769920
HI7031L KCl solution with a standard conductivity of 1413 µS/cm
The HI7031L is a premium conductivity standard with a conductivity value of 1413 µS/cm, based on a NIST traceable potassium chloride solution.
SKU: HI7031L
51350010 Buffer pH 10.00, 250 ml
Technical buffer solution for calibration of ph meters and electrodes.
SKU: 51350010
ISE standard solution, nitrate (NO3-N) concentration 10 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 30749
ORP calibration solution in ampoules (Light's solution)
Light's solution in ampoules for calibration of ORP meters. The package contains 20 ampoules of 20 ml.
SKU: 2612520
Powder Pillows buffer, pH 6.86, 15 pcs.
Calibration buffer for pH meter in powder form for dilution.
SKU: 1409895
Certified Buffer Standard Solution, pH 4,005
Certified Buffer Standard Solution, pH 4.005 ±0.010 pH at 25°C, 500 mL.
SKU: S11M002
Calibration solution for conductivity meter 147 μS/cm, KCl, 250 ml
Sodium chloride standard solution for checking the accuracy of the conductivity analysis procedure of the aqueous solution and the instrument being measured.
SKU: LZW9700.99
Calibration solutions for TDS meters 3000 ppm
A solution of Na2SO4, Na2CO3, NaCl for calibrating conductivity meters and the total dissolved solids (salinity) of water.
SKU: 2974826, 2974849
51302069 Buffer pH 4.01 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302069
Chloride Ionic Strength Adjustor (ISA) Powder Pillows, pk/100
Chloride Ionic Strength Adjustor (ISA) for Chloride determinations by Ion Selective Electrode (ISE) method. Ideal for low Chloride level readings. Pack of 100 powder pillows.
SKU: 2318069
ORP / Redox calibration solution (ZoBell's solution)
Standard solution for calibration and accuracy verification of ORP electrodes.
SKU: 2316949
Buffer solution pH 7.00 25 mL
Colorless pH meter calibration solution.
SKU: 1222220
Buffer solution pH 4.01, 125 mL
Calibration solution with standard pH value for pH meters and electrodes.
SKU: LZW9460.99
Calibration solution for conductivity meter 147 μS/cm, KCl, 125 mL
Solution for calibrating the conductivity meter and checking the accuracy of the analysis.
SKU: LZW9701.99
Conductivity Standard Solution, 1413 µS/cm
Standard conductivity solution, concentration 1413 μS/cm ± 1% at 25 °C / 0.01M KCl, 500 ml.
SKU: C20C270
51302047 Buffer pH 7.00 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302047
Filling Solution, ISENa381, 0,02 M NH4Cl, 59 mL
Filling solution for Sodium Ion Selective Electrode (ISENa381), Ammonium Chloride (NH4Cl), 0,02 M, 59 mL bottle.
SKU: 2965126
ORP buffer solution for calibration 200 mV, 500 ml
ORP reference solution used to calibrate the ORP sensor (in resealable plastic bottles).
SKU: 25M2A1001-115
Buffer Solution, pH 4,65
Buffer Solution, concentration pH 4,65 ± 0,02, 500 mL.
SKU: S11M010
Sorting:
51350018 Technical buffer pH 4.01, 6 x 250 ml
pH buffer with a value of 4.01 for calibrating ph electrodes and ph meters.
SKU: 51350018
HI7007L buffer solution pH 7.01, volume 500 ml
pH 7.01 is the most widely used value of all buffer solutions.
SKU: HI7007L
51350022 Technical buffer pH 9.21, 6 x 250 ml
pH buffer for calibrating electrodes and pH meters.
SKU: 51350022
HI7010L buffer pH 10.01, volume 500 ml
A pH 10.01 buffer solution is commonly used to calibrate equipment used to analyze samples of water and other liquids.
SKU: HI7010L
Singlet Single-Use pH Buffer Kit, pH 4,01 & 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 4,01 & 7,00, 20 mL each.
SKU: 2769920
HI7031L KCl solution with a standard conductivity of 1413 µS/cm
The HI7031L is a premium conductivity standard with a conductivity value of 1413 µS/cm, based on a NIST traceable potassium chloride solution.
SKU: HI7031L
51350010 Buffer pH 10.00, 250 ml
Technical buffer solution for calibration of ph meters and electrodes.
SKU: 51350010
ISE standard solution, nitrate (NO3-N) concentration 10 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 30749
ORP calibration solution in ampoules (Light's solution)
Light's solution in ampoules for calibration of ORP meters. The package contains 20 ampoules of 20 ml.
SKU: 2612520
Powder Pillows buffer, pH 6.86, 15 pcs.
Calibration buffer for pH meter in powder form for dilution.
SKU: 1409895
Certified Buffer Standard Solution, pH 4,005
Certified Buffer Standard Solution, pH 4.005 ±0.010 pH at 25°C, 500 mL.
SKU: S11M002
Calibration solution for conductivity meter 147 μS/cm, KCl, 250 ml
Sodium chloride standard solution for checking the accuracy of the conductivity analysis procedure of the aqueous solution and the instrument being measured.
SKU: LZW9700.99
Calibration solutions for TDS meters 3000 ppm
A solution of Na2SO4, Na2CO3, NaCl for calibrating conductivity meters and the total dissolved solids (salinity) of water.
SKU: 2974826, 2974849
51302069 Buffer pH 4.01 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302069
Chloride Ionic Strength Adjustor (ISA) Powder Pillows, pk/100
Chloride Ionic Strength Adjustor (ISA) for Chloride determinations by Ion Selective Electrode (ISE) method. Ideal for low Chloride level readings. Pack of 100 powder pillows.
SKU: 2318069
ORP / Redox calibration solution (ZoBell's solution)
Standard solution for calibration and accuracy verification of ORP electrodes.
SKU: 2316949
Buffer solution pH 7.00 25 mL
Colorless pH meter calibration solution.
SKU: 1222220
Buffer solution pH 4.01, 125 mL
Calibration solution with standard pH value for pH meters and electrodes.
SKU: LZW9460.99
Calibration solution for conductivity meter 147 μS/cm, KCl, 125 mL
Solution for calibrating the conductivity meter and checking the accuracy of the analysis.
SKU: LZW9701.99
Conductivity Standard Solution, 1413 µS/cm
Standard conductivity solution, concentration 1413 μS/cm ± 1% at 25 °C / 0.01M KCl, 500 ml.
SKU: C20C270
51302047 Buffer pH 7.00 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302047
Filling Solution, ISENa381, 0,02 M NH4Cl, 59 mL
Filling solution for Sodium Ion Selective Electrode (ISENa381), Ammonium Chloride (NH4Cl), 0,02 M, 59 mL bottle.
SKU: 2965126
ORP buffer solution for calibration 200 mV, 500 ml
ORP reference solution used to calibrate the ORP sensor (in resealable plastic bottles).
SKU: 25M2A1001-115
Buffer Solution, pH 4,65
Buffer Solution, concentration pH 4,65 ± 0,02, 500 mL.
SKU: S11M010