Probes and sensors
This section of the catalog presents a wide selection of Hach Lange Intellical probes and electrodes for the most demanding laboratory and field tasks in the following parameters: pH, dissolved oxygen, BOD, conductivity, TDS, ORP, ammonia, ammonium, chloride, fluoride, nitrate and sodium. All Intellical probes are automatically recognized by the HQ / HQD series meters and retain their calibration data, eliminating the need to recalibrate when switching between meters. The Red Rod pH electrodes provide exceptional performance and response times for a wide variety of sample types in the laboratory. The rugged outdoor sensors are housed in a stainless steel housing and, thanks to digital technology, can be used with cables up to 30 meters. In addition to sensors and electrodes, this section contains solutions for sensor maintenance, conductivity standards and pH buffers.
Sorting:
SKU: HI11310
SKU: HP-960FTP
SKU: 305090
ISE Ammonia Standard Solution, 100 mg/L, 500 mL
ISE Standard Solution. Ammonia, 100 mg/L ±2 mg/L NH3-N. 500 mL bottle.
SKU: 2406549
ISE standard solution, Fluoride (F-) concentration 100 mg/l; volume 500 ml
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 23249
Ion Selective Electrode (ISE) Intellical ISENO3181 Nitrate (NO3-) with calibration reagents
The Intellical Nitrate ISE Analysis Package contains everything you need to determine nitrate (NO3-) with the HQD series meters.
SKU: ISENO3181AP
ORP buffer solution for calibration, 600 mV
Reference solution for calibration of ORP electrodes (sealed plastic bottle).
SKU: 25M2A1002-115
Buffer Solution, pH 4,65
Buffer Solution, concentration pH 4,65 ± 0,02, 500 mL.
SKU: S11M010
Buffer solution pH 7.00, 125 mL
Calibration solution for pH meters and electrodes.
SKU: LZW9461.98
Calibration solution for conductivity meter 1413 µS/cm, KCl, 250 mL
Standard conductivity solution 1413 μS/cm for calibrating meter, sensor and verifying analytical accuracy.
SKU: LZW9710.99
KCl calibration solution for conductivity meter 12890 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974426, 2974449
HI770710P pH 7.01 and 10.01 Buffer Sachets (Kit)
Set of calibration buffer solutions pH 7.01 and 10.01 +/- 0.01 pH at 25°C.
SKU: HI770710P
30248832 pH electrode InLab Routine Go-ISM
Combined pH electrode with glass body, built-in temperature sensor, fixed cable and ISM technology. It is intended for work in laboratory and in field conditions.
SKU: 30248832
SKU: E16M305
SKU: U-50
SKU: 150703
ISE Ammonia Standard Solution, 10 mg/L, 500 mL
ISE Standard Solution. Ammonia, 10,0 mg/L ±0,5 mg/L NH3-N. 500 mL bottle.
SKU: 15349
ISE standard solution, nitrate (NO3-N) concentration 1000 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1279249
Ion Selective Electrode (ISE) Intellical ISENA38101, Sodium (Na +) with calibration reagents
The Intellical Sodium ISE Analysis Package contains everything you need to determine sodium (Na +) with the HQD series meters.
SKU: ISENA381AP
Laboratory refillable electrode ORP / RedOx Intellical MTC301; cable length 1, 3 m
Intellical MTC301 is a digital sensor for determining the redox potential (ORP / redox potential) with a built-in temperature sensor.
SKU: MTC30101, MTC30103
Certified Buffer Standard Solution, pH 1.679
Certified Buffer Standard Solution,1.679 ±0.010 pH at 25°C.
SKU: S11M001
Buffer solution pH 10.01, 125 ml
Calibration solution with pH 10.01 ± 0.02 at 25 ° C for ph electrodes.
SKU: LZW9470.99
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
KCl calibration solution for conductivity meters 1412 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974326, 2974349
Sorting:
SKU: HI11310
SKU: HP-960FTP
SKU: 305090
ISE Ammonia Standard Solution, 100 mg/L, 500 mL
ISE Standard Solution. Ammonia, 100 mg/L ±2 mg/L NH3-N. 500 mL bottle.
SKU: 2406549
ISE standard solution, Fluoride (F-) concentration 100 mg/l; volume 500 ml
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 23249
Ion Selective Electrode (ISE) Intellical ISENO3181 Nitrate (NO3-) with calibration reagents
The Intellical Nitrate ISE Analysis Package contains everything you need to determine nitrate (NO3-) with the HQD series meters.
SKU: ISENO3181AP
ORP buffer solution for calibration, 600 mV
Reference solution for calibration of ORP electrodes (sealed plastic bottle).
SKU: 25M2A1002-115
Buffer Solution, pH 4,65
Buffer Solution, concentration pH 4,65 ± 0,02, 500 mL.
SKU: S11M010
Buffer solution pH 7.00, 125 mL
Calibration solution for pH meters and electrodes.
SKU: LZW9461.98
Calibration solution for conductivity meter 1413 µS/cm, KCl, 250 mL
Standard conductivity solution 1413 μS/cm for calibrating meter, sensor and verifying analytical accuracy.
SKU: LZW9710.99
KCl calibration solution for conductivity meter 12890 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974426, 2974449
HI770710P pH 7.01 and 10.01 Buffer Sachets (Kit)
Set of calibration buffer solutions pH 7.01 and 10.01 +/- 0.01 pH at 25°C.
SKU: HI770710P
30248832 pH electrode InLab Routine Go-ISM
Combined pH electrode with glass body, built-in temperature sensor, fixed cable and ISM technology. It is intended for work in laboratory and in field conditions.
SKU: 30248832
SKU: E16M305
SKU: U-50
SKU: 150703
ISE Ammonia Standard Solution, 10 mg/L, 500 mL
ISE Standard Solution. Ammonia, 10,0 mg/L ±0,5 mg/L NH3-N. 500 mL bottle.
SKU: 15349
ISE standard solution, nitrate (NO3-N) concentration 1000 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1279249
Ion Selective Electrode (ISE) Intellical ISENA38101, Sodium (Na +) with calibration reagents
The Intellical Sodium ISE Analysis Package contains everything you need to determine sodium (Na +) with the HQD series meters.
SKU: ISENA381AP
Laboratory refillable electrode ORP / RedOx Intellical MTC301; cable length 1, 3 m
Intellical MTC301 is a digital sensor for determining the redox potential (ORP / redox potential) with a built-in temperature sensor.
SKU: MTC30101, MTC30103
Certified Buffer Standard Solution, pH 1.679
Certified Buffer Standard Solution,1.679 ±0.010 pH at 25°C.
SKU: S11M001
Buffer solution pH 10.01, 125 ml
Calibration solution with pH 10.01 ± 0.02 at 25 ° C for ph electrodes.
SKU: LZW9470.99
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
KCl calibration solution for conductivity meters 1412 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974326, 2974349

