Probes and sensors
This section of the catalog presents a wide selection of Hach Lange Intellical probes and electrodes for the most demanding laboratory and field tasks in the following parameters: pH, dissolved oxygen, BOD, conductivity, TDS, ORP, ammonia, ammonium, chloride, fluoride, nitrate and sodium. All Intellical probes are automatically recognized by the HQ / HQD series meters and retain their calibration data, eliminating the need to recalibrate when switching between meters. The Red Rod pH electrodes provide exceptional performance and response times for a wide variety of sample types in the laboratory. The rugged outdoor sensors are housed in a stainless steel housing and, thanks to digital technology, can be used with cables up to 30 meters. In addition to sensors and electrodes, this section contains solutions for sensor maintenance, conductivity standards and pH buffers.
Sorting:
KCl calibration solution for conductivity meter 12890 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974426, 2974449
HI770710P pH 7.01 and 10.01 Buffer Sachets (Kit)
Set of calibration buffer solutions pH 7.01 and 10.01 +/- 0.01 pH at 25°C.
SKU: HI770710P
30248832 pH electrode InLab Routine Go-ISM
Combined pH electrode with glass body, built-in temperature sensor, fixed cable and ISM technology. It is intended for work in laboratory and in field conditions.
SKU: 30248832
SKU: E16M305
SKU: U-50
SKU: 150703
ISE Ammonia Standard Solution, 10 mg/L, 500 mL
ISE Standard Solution. Ammonia, 10,0 mg/L ±0,5 mg/L NH3-N. 500 mL bottle.
SKU: 15349
ISE standard solution, nitrate (NO3-N) concentration 1000 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1279249
Ion Selective Electrode (ISE) Intellical ISENA38101, Sodium (Na +) with calibration reagents
The Intellical Sodium ISE Analysis Package contains everything you need to determine sodium (Na +) with the HQD series meters.
SKU: ISENA381AP
Laboratory refillable electrode ORP / RedOx Intellical MTC301; cable length 1, 3 m
Intellical MTC301 is a digital sensor for determining the redox potential (ORP / redox potential) with a built-in temperature sensor.
SKU: MTC30101, MTC30103
Certified Buffer Standard Solution, pH 1.679
Certified Buffer Standard Solution,1.679 ±0.010 pH at 25°C.
SKU: S11M001
Buffer solution pH 10.01, 125 ml
Calibration solution with pH 10.01 ± 0.02 at 25 ° C for ph electrodes.
SKU: LZW9470.99
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
KCl calibration solution for conductivity meters 1412 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974326, 2974349
HI70004P pH 4.01 buffer solution for calibration (25 x 20 ml)
HI70004P contains 25 sachets containing 20 ml buffer solution for calibrating pH meters and electrodes.
SKU: HI70004P
30248830 pH electrode InLab Max Pro-ISM
A versatile pH electrode with a fixed glass collar that prevents contaminants from entering and clogging the connection.
SKU: 30248830
SKU: HI1131B
SKU: UP-100
SKU: 1044544
Ionic Strength Adjustor Nitrate (ISA), 100 pieces
Ionic Strength Adjustor for Hach Ion Selective Electrodes.
SKU: 2984799
ISE standard solution, nitrate (NO3-N) concentration 1 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 204649
Ion Selective Electrode (ISE) Intellical ISENa381, Sodium (Na +); cable 1, 3 m
Intellical ISENa381 is a digital combination ion selective electrode (ISE) for sodium determination with a built-in temperature sensor.
SKU: ISENA38101, ISENA38103
Singlet Single-Use pH Buffer Kit, pH 7,00 & 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 7.00 and 10 of pH 10.01, 20 mL each.
SKU: 2769820
Buffer Solution, pH 10,01
Buffer Solution, concentration pH 10,01 ± 0,02, 500 mL.
SKU: 1222149
Sorting:
KCl calibration solution for conductivity meter 12890 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974426, 2974449
HI770710P pH 7.01 and 10.01 Buffer Sachets (Kit)
Set of calibration buffer solutions pH 7.01 and 10.01 +/- 0.01 pH at 25°C.
SKU: HI770710P
30248832 pH electrode InLab Routine Go-ISM
Combined pH electrode with glass body, built-in temperature sensor, fixed cable and ISM technology. It is intended for work in laboratory and in field conditions.
SKU: 30248832
SKU: E16M305
SKU: U-50
SKU: 150703
ISE Ammonia Standard Solution, 10 mg/L, 500 mL
ISE Standard Solution. Ammonia, 10,0 mg/L ±0,5 mg/L NH3-N. 500 mL bottle.
SKU: 15349
ISE standard solution, nitrate (NO3-N) concentration 1000 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1279249
Ion Selective Electrode (ISE) Intellical ISENA38101, Sodium (Na +) with calibration reagents
The Intellical Sodium ISE Analysis Package contains everything you need to determine sodium (Na +) with the HQD series meters.
SKU: ISENA381AP
Laboratory refillable electrode ORP / RedOx Intellical MTC301; cable length 1, 3 m
Intellical MTC301 is a digital sensor for determining the redox potential (ORP / redox potential) with a built-in temperature sensor.
SKU: MTC30101, MTC30103
Certified Buffer Standard Solution, pH 1.679
Certified Buffer Standard Solution,1.679 ±0.010 pH at 25°C.
SKU: S11M001
Buffer solution pH 10.01, 125 ml
Calibration solution with pH 10.01 ± 0.02 at 25 ° C for ph electrodes.
SKU: LZW9470.99
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
KCl calibration solution for conductivity meters 1412 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974326, 2974349
HI70004P pH 4.01 buffer solution for calibration (25 x 20 ml)
HI70004P contains 25 sachets containing 20 ml buffer solution for calibrating pH meters and electrodes.
SKU: HI70004P
30248830 pH electrode InLab Max Pro-ISM
A versatile pH electrode with a fixed glass collar that prevents contaminants from entering and clogging the connection.
SKU: 30248830
SKU: HI1131B
SKU: UP-100
SKU: 1044544
Ionic Strength Adjustor Nitrate (ISA), 100 pieces
Ionic Strength Adjustor for Hach Ion Selective Electrodes.
SKU: 2984799
ISE standard solution, nitrate (NO3-N) concentration 1 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 204649
Ion Selective Electrode (ISE) Intellical ISENa381, Sodium (Na +); cable 1, 3 m
Intellical ISENa381 is a digital combination ion selective electrode (ISE) for sodium determination with a built-in temperature sensor.
SKU: ISENA38101, ISENA38103
Singlet Single-Use pH Buffer Kit, pH 7,00 & 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 7.00 and 10 of pH 10.01, 20 mL each.
SKU: 2769820
Buffer Solution, pH 10,01
Buffer Solution, concentration pH 10,01 ± 0,02, 500 mL.
SKU: 1222149

