A critical element of disinfection is accurate dosing and monitoring of the ClO2 level in the water. Adding chlorine dioxide in the right concentration saves material, protects the environment and the health of the end user of your product. Continuously monitor the chlorine dioxide level in the water with the Hach Lange 9187 sc analyzer.
Products
Portable oxygen meter Fibox 4 trace
The Fibox 4 trace is a portable and fully self-contained optical oxygen meter for measuring O2 levels. Compatible with oxygen sensors ranging from 1 ppb to 100%
SKU: Fibox 4 trace
Portable oxygen meter Fibox 3 LCD trace v9
The PreSens Fibox 3 LCD Oxygen Meter is a compact, portable, easy-to-carry optical oximeter for stand-alone or PC-controlled use. The Oximeter can be used with normal, low and ultra-low O2 sensors.
SKU: Fibox 3 LCD trace v9
Optical point SP-PSt9 for oxygen sensor PreSens
Optical point SP-PSt9 for non-invasive measurement of ultra-low oxygen content in the range of 0 - 200 ppmv O2, with a detection limit of 0.5 ppmv oxygen.
SKU: SP-PSt9-NAU-D3-OIW
Replacement cap OEC30-PSt7-NAU-OIW with oxygen sensor for OXYPro WR and WRM probes
The wide range PSt7 sensor is built into a beveled stainless steel cap. The design reduces the formation of air bubbles on the sensor with a very fast response time (< 3 sec.).
SKU: OEC30-PSt7-NAU-OIW
Oxygen sensitive PET bottle cap OSC-PSt3
The oxygen sensitive PET bottle cap PreSens OSC-PSt3 is designed to measure oxygen penetration into opaque bottles in the range of 0 - 100% O2, 0 - 1000 hPa / 0 - 45 mg/L, 0 - 1400 μmol/L.
SKU: OSC-PSt3
PreSens IS-SP Optical Point Integration Kit
The kit is specially designed for easy and convenient movement of PreSens optical points even in tall and hard-to-reach containers. It can be used to integrate PreSens self-adhesive points, such as SP-PSt3-SA, and SP-PSt3, SP-PSt6, SP-PSt9 optical points into containers, using liquid glue.
SKU: IS-SP
Needle micro oxygen sensor NFSG-PSt7
The NFSG-PSt7 Fixed Tip Micro Needle Oxygen Sensor has a measuring range from 0 to 100% oxygen with a detection limit of 0.03% oxygen. Designed for headspace measurement in packaging or other applications where small volume measurements of gaseous oxygen are required.
SKU: NFSG-PSt7
Compact oxygen meter OXY-1 SMA
PreSens OXY-1 SMA is compatible with optical point type PSt3 and allows measurements of both gaseous and dissolved oxygen in the range of 0 -100% O2. Due to its small external dimensions, the oximeter can be installed almost anywhere.
SKU: OXY-1 SMA
Needle micro oxygen sensor NFSG-PSt8
The NFSG-PSt8 Fixed Tip Micro Needle Oxygen Sensor is designed for headspace measurement of trace oxygen or other applications where small volume measurements of gaseous oxygen are required. Has a measurement range from 0 to 10% oxygen with a detection limit of 0.007% O2.
SKU: NFSG-PSt8
Oxygen Probe for In-Line Measurement OIM-PSt3
PreSens OIM-PSt3 is designed for process control and provides accurate and stable O2 measurements in the 0-100% / 0-45 mg / L range, with a detection limit of 0.03% / 15 ppb.
SKU: OIM-PSt3
Multichannel oxygen meter OXY-4 SMA (G3)
The PreSens OXY 4 SMA multichannel oxygen meter can measure O2 in both liquid and gaseous phase, compatible with non-invasive sensors, immersion probes and flow cells type PSt3 (detection limit 15 ppb dissolved oxygen, 0 - 100% oxygen).
SKU: OXY-4 SMA (G3)
Self-adhesive optical point SP-PSt3-SA for oxygen sensor PreSens
Optical point SP-PSt3-SA for non-invasive online monitoring of oxygen in the dissolved or gaseous phase in the range of 0 - 100%, 0 - 45 mg/l.
SKU: SP-PSt3-SA
Microx 4 trace portable oxygen meter
PreSens Microx 4 trace is a compact, fully self-contained fiber optic oxygen meter for non-contact and microinvasive O2 measurements. Compatible with PSt7 sensors (detection limit 15 ppb, 0 - 100% oxygen) and also with PSt8 trace oxygen sensors (detection limit 3 ppb, 0 - 10% oxygen).
SKU: Microx 4 trace
Optical point SP-PSt7-NAU for oxygen sensor PreSens
Optical points SP-PSt7-NAU and SP-PSt7-YAU for PreSens oxygen sensors allow O2 measurements from 0 to 100% with a detection limit of 0.03%. SP-PSt7-NAU - not autoclavable. SP-PSt7-YAU - autoclavable.
SKU: SP-PSt7-NAU, SP-PSt7-YAU
Oxygen Probe for In-Line Measurement OIM-PSt6
PreSens OIM-PSt6 is designed for process control and provides accurate and stable O2 measurements in the 0-5% / 0-2 mg/L range, with a detection limit of 0.002% / 1 ppb.
SKU: OIM-PSt6
Optical point SP-PSt8-NAU for oxygen sensor PreSens
Optical points SP-PSt8-NAU and SP-PSt8-YAU for PreSens oxygen sensors allow O2 measurement in the range from 0 to 10%, detection limit - 0.007%. SP-PSt8-NAU - not autoclavable. SP-PSt8-YAU - autoclavable.
SKU: SP-PSt8-NAU, SP-PSt8-YAU
Oxygen sensitive PET bottle cap OSC-PSt6
The oxygen sensitive PET bottle cap PreSens OSC-PSt6 is designed to measure oxygen penetration in colored bottles in the range of 0 - 5% O2 / 0 - 2 mg/l.
SKU: OSC-PSt6
ARC PreSens Round Container Adapter (Velcro® tape)
The Adjustable Velcro® PreSens Adapter can be used for round containers with a diameter of 2.5 to 20 cm (1 to 8 inches). Designed to hold polymer optical fiber in place while reading O2, pH, CO2 sensor readings.
SKU: ARC
Replacement oxygen sensor for OXYBase WR probes
The PreSens cap is made of stainless steel with an integrated PSt3 sensor.
SKU: OEC-PSt3-NAU
Flow cell OTR-PSt3 / -PSt6 / -PSt9
The stainless steel PreSens measuring cell is designed to improve tightness. OTR-PSt3 can be used for the high range of oxygen measurement, OTR-PSt6 for the middle range, and OTR-PSt9 for the low range.
SKU: OTR-PSt3
Replacement cap OEC30-PSt3-NAU for OXYBase WR oxygen probe
Replaceable oxygen sensor for fast response times and reduced air bubbles for OXYBase WR probes.
SKU: OEC30-PSt3-NAU-OIW
Optical point SP-PSt3-NAU for oxygen sensor PreSens
The optical point is the most versatile version of the non-invasive optical oxygen sensors. SP-PSt3-NAU has a measuring range from 0 to 100% oxygen in dissolved or gas phase
SKU: SP-PSt3-NAU
OXYBase WR-RS485 and WR-RS485M sensors for measuring gaseous and dissolved oxygen
OXYBase® WR-RS485 and WR-RS485M combine an optical sensor of the PSt3 type and an electro-optical module in one probe. The maximum measuring range is 0 - 100% O2 and the detection limit is 0.03% O2.
SKU: WR-RS485, WR-RS485M
Optical point SP-PSt6-YAU for oxygen sensor PreSens
The optical point is the most versatile version of optical oxygen sensors. Dissolved and gaseous oxygen is measured in a non-contact way through the transparent wall of the container. SP-PSt6-YAU has a measuring range of 0 to 5% oxygen in dissolved or gas phase.
SKU: SP-PSt6-YAU