+7 (495) 201-53-02
Water purification systems
Laboratory water purification systems are used to obtain pure and ultrapure water that meets quality standards for everyday laboratory tasks. Tap water may be somewhat effective, but it contains contaminants including organic matter, bacteria, gases, particulate matter, and inorganic ions. Whether it's water for chemical analysis or to feed analyzers, autoclaves, and laboratory glassware washers, Stakpure cleaning systems provide the perfect solution for any application. Applications also include the preparation of buffers, microbiological media, chemical, and biochemical reagents. Stakpure laboratory water systems are economical, flexible, and meet GOST, ISO, ASTM, CLSI standards in regards to water quality for laboratory analysis.
Filters
Sorting:
Ultrapure and Pure Water System OmniaTap 6 | 12
OmniaTap 6 and 12 are laboratory water treatment systems for producing pure and ultrapure water in relatively small quantities (< 50 liters/day). The ability to provide water of two degrees of purity in one system is the result of a combination of cutting-edge technologies. Pure water is suitable for the preparation of: buffers, microbiological media, chemical and biochemical reagents.
SKU: 18200051, 18200101
Compare
OmniaTap UV laboratory pure and ultrapure water systems
OmniaTap UV water treatment systems are used to purify tap water to meet laboratory water standards. In addition to standard filter cartridges, water passes through a UV reactor, where it is disinfected using UV radiation.
SKU: 18200052, 18200102
Laboratory water purification systems OmniaTap UV/UF
Stakpure's OmniaTap UV/UF are designed to produce clean and ultrapure water for laboratory use. The model is equipped with a UV reactor and an ultrafiltration module to remove microorganisms and non-ionized compounds.
SKU: 18200053, 18200103
OmniaLab ED+ Water treatment system for laboratories, tank 100 liters
Stakpure's all-in-one water purification system for laboratory autoclaves and dishwashers. The tank holds 100 liters. Supply of pure water (type 2) and ultrapure water (type 1).
SKU: 18700020, 18700040, 18700070
OmniaLab ED laboratory water purification system (purity class 2)
OmniaLab ED is designed to provide a comprehensive laboratory supply of high quality type 2 clean water. Water supply for autoclaves, laboratory washers and ultrapure water systems.
SKU: 18700021, 18700041, 18700071
OmniaLab UP 20/40 Water purification system, type 2
OmniaLabUP is a laboratory water treatment system with a constant supply of high quality water. The OmniaLab UP is equipped with a 100 liter recirculating tank for storing Type II pure water.
SKU: 18600020, 18600040
Water purification system OmniaLabDS 20/40/60/80, water type 2 and CLRW (CLSI)
The OmniaLabDS water purification system produces Type 2 pure water up to 80 liters per hour. An aftertreatment cartridge and an optional emergency power supply make this system exceptionally reliable for feeding clinical analytical systems, as well as supplying water to steam sterilizers and washer-disinfectors.
SKU: 18800020, 18800040, 18800060, 18800080
Laboratory water purification system OmniaLabRO 20/40/60/80, type 3
Water purification by reverse osmosis. OmniaLabRO produces water of the third type, which is suitable for applications where the content of salts, silicates and suspended solids must be reduced. The main applications are buffer preparation, laboratory glassware washing/rinsing, general chemistry, hydroponics, supplying water to stainless steel autoclaves, steam generators, air humidifiers, sterilizers and Type 1 ultrapure water systems.
SKU: 18500020, 18500040, 18500060, 18500080
OmniaPure ultrapure water systems, type 1
If you need the highest quality pure water that meets the requirements of analytical and life science laboratories, one of the OmniaPure systems is for you. The built-in pre-cleaning system ensures reliable analysis results at all times and reduces operating costs. OmniaPure laboratory water purification systems can be customized to meet the needs of the laboratory, including continuous TOC control or UV disinfection.
SKU: 18200001
Sorting:
Ultrapure and Pure Water System OmniaTap 6 | 12
OmniaTap 6 and 12 are laboratory water treatment systems for producing pure and ultrapure water in relatively small quantities (< 50 liters/day). The ability to provide water of two degrees of purity in one system is the result of a combination of cutting-edge technologies. Pure water is suitable for the preparation of: buffers, microbiological media, chemical and biochemical reagents.
SKU: 18200051, 18200101
OmniaTap UV laboratory pure and ultrapure water systems
OmniaTap UV water treatment systems are used to purify tap water to meet laboratory water standards. In addition to standard filter cartridges, water passes through a UV reactor, where it is disinfected using UV radiation.
SKU: 18200052, 18200102
Laboratory water purification systems OmniaTap UV/UF
Stakpure's OmniaTap UV/UF are designed to produce clean and ultrapure water for laboratory use. The model is equipped with a UV reactor and an ultrafiltration module to remove microorganisms and non-ionized compounds.
SKU: 18200053, 18200103
OmniaLab ED+ Water treatment system for laboratories, tank 100 liters
Stakpure's all-in-one water purification system for laboratory autoclaves and dishwashers. The tank holds 100 liters. Supply of pure water (type 2) and ultrapure water (type 1).
SKU: 18700020, 18700040, 18700070
OmniaLab ED laboratory water purification system (purity class 2)
OmniaLab ED is designed to provide a comprehensive laboratory supply of high quality type 2 clean water. Water supply for autoclaves, laboratory washers and ultrapure water systems.
SKU: 18700021, 18700041, 18700071
OmniaLab UP 20/40 Water purification system, type 2
OmniaLabUP is a laboratory water treatment system with a constant supply of high quality water. The OmniaLab UP is equipped with a 100 liter recirculating tank for storing Type II pure water.
SKU: 18600020, 18600040
Water purification system OmniaLabDS 20/40/60/80, water type 2 and CLRW (CLSI)
The OmniaLabDS water purification system produces Type 2 pure water up to 80 liters per hour. An aftertreatment cartridge and an optional emergency power supply make this system exceptionally reliable for feeding clinical analytical systems, as well as supplying water to steam sterilizers and washer-disinfectors.
SKU: 18800020, 18800040, 18800060, 18800080
Laboratory water purification system OmniaLabRO 20/40/60/80, type 3
Water purification by reverse osmosis. OmniaLabRO produces water of the third type, which is suitable for applications where the content of salts, silicates and suspended solids must be reduced. The main applications are buffer preparation, laboratory glassware washing/rinsing, general chemistry, hydroponics, supplying water to stainless steel autoclaves, steam generators, air humidifiers, sterilizers and Type 1 ultrapure water systems.
SKU: 18500020, 18500040, 18500060, 18500080
OmniaPure ultrapure water systems, type 1
If you need the highest quality pure water that meets the requirements of analytical and life science laboratories, one of the OmniaPure systems is for you. The built-in pre-cleaning system ensures reliable analysis results at all times and reduces operating costs. OmniaPure laboratory water purification systems can be customized to meet the needs of the laboratory, including continuous TOC control or UV disinfection.
SKU: 18200001